Merge pull request #732 from ApolloAutomation/docs/fix-dps310-note

docs: fix DPS310 availability note on MSR-2, MTR-1, AIR-1

Author: bharvey88

docs/products/air1/setup/sensor-definitions.md

@@ -118,7 +118,7 @@ Detects volatile organic compounds (VOC Index), which are emitted from paints, c
 * **SEN55 Humidity Offset**
   * Allows you to calibrate the SEN55 humidity. Please refer to our [calibration guide](https://wiki.apolloautomation.com/products/general/temp-hum-calibration/ "MSR-1 Temperature & Humidity Offsets").
 * **DPS310 Pressure Offset**
-  * Allows you to apply a calibration offset (in hPa) to the DPS310 pressure reading. Range is -100 to +100 hPa in 0.1 hPa steps. Disabled by default (0.0 hPa offset). Note: A small subset of devices do not include a DPS310 sensor — if you do not see this option, your device may be one of these units.
+  * Allows you to apply a calibration offset (in hPa) to the DPS310 pressure reading. Range is -100 to +100 hPa in 0.1 hPa steps. Disabled by default (0.0 hPa offset). Note: A small subset of devices do not include a DPS310 sensor. If this option is unknown, your device may be one of these units.
 
 ![AIR-1 Sensor Data.jpg](/assets/air-1-device-page-pic-1.png)
 
@@ -142,7 +142,7 @@ Detects volatile organic compounds (VOC Index), which are emitted from paints, c
 
 **DPS310 Pressure Offset**
 
-* Allows you to apply a calibration offset (in hPa) to the DPS310 pressure reading. Range is -100 to +100 hPa in 0.1 hPa steps. Disabled by default (0.0 hPa offset). Note: A small subset of devices do not include a DPS310 sensor — if you do not see this option, your device may be one of these units.
+* Allows you to apply a calibration offset (in hPa) to the DPS310 pressure reading. Range is -100 to +100 hPa in 0.1 hPa steps. Disabled by default (0.0 hPa offset). Note: A small subset of devices do not include a DPS310 sensor. If this option is unknown, your device may be one of these units.
 
 #### Diagnostic:
 

docs/products/msr2/setup/msr2-sensor-definitions.md

@@ -32,11 +32,11 @@ Once added to Home Assistant you can configure different settings for your senso
 
     **DPS310 Pressure**
 
-    * Measures the air pressure in the environment. Note: A small subset of devices do not include a DPS310 sensor — if you do not see this reading, your device may be one of these units.
+    * Measures the air pressure in the environment. Note: A small subset of devices do not include a DPS310 sensor. If this sensor is unknown, your device may be one of these units.
 
     **DPS310 Temperature**
 
-    * Measures the ambient air temperature using the DPS310 sensor.
+    * Measures the ambient air temperature using the DPS310 sensor. Note: A small subset of devices do not include a DPS310 sensor. If this sensor is unknown, your device may be one of these units.
 
     **LTR390 Light**
 

docs/products/mtr1/setup/sensor-definitions.md

@@ -26,11 +26,11 @@ description: These are all of the entities exposed by the MTR-1 to automate on!
 
     **DPS310 Pressure**
 
-    * Measures the air pressure in the environment. Note: A small subset of devices do not include a DPS310 sensor — if you do not see this reading, your device may be one of these units.
+    * Measures the air pressure in the environment. Note: A small subset of devices do not include a DPS310 sensor. If this sensor is unknown, your device may be one of these units.
 
     **DPS310 Temperature**
 
-    * Measures the ambient air temperature using the DPS310 sensor.
+    * Measures the ambient air temperature using the DPS310 sensor. Note: A small subset of devices do not include a DPS310 sensor. If this sensor is unknown, your device may be one of these units.
 
     **LTR390 Light**