Merge tag 'soc-arm-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC code updates from Arnd Bergmann:
 "Another small set of code changes for the 32-bit Arm platforms, and a
  trivial update to the Kconfig entry for the arm64 TI K3 chip.

  Andrew Davis cleans up the system reset handling, which touches a
  couple of platforms.

  The mediatek platform needs some code changes to support
  multiprocessing in the newly added support for the old mt6572 chip"

* tag 'soc-arm-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: sa110/gpio: convert set_multiple() to returning an integer
  ARM: rockchip: fix kernel hang during smp initialization
  ARM: mediatek: add MT6572 smp bring up code
  ARM: mediatek: add board_dt_compat entry for the MT6572 SoC
  ARM: tegra: Use I/O memcpy to write to IRAM
  arm: orion: use string choices helper
  ARM: Switch to new sys-off handler API
  arm64: Kconfig.platforms: remove useless select for ARCH_K3

Author: torvalds

arch/arm/common/sa1111.c

@@ -578,8 +578,8 @@ static int sa1111_gpio_set(struct gpio_chip *gc, unsigned int offset, int value)
 	return 0;
 }
 
-static void sa1111_gpio_set_multiple(struct gpio_chip *gc, unsigned long *mask,
-	unsigned long *bits)
+static int sa1111_gpio_set_multiple(struct gpio_chip *gc, unsigned long *mask,
+				    unsigned long *bits)
 {
 	struct sa1111 *sachip = gc_to_sa1111(gc);
 	unsigned long flags;
@@ -597,6 +597,8 @@ static void sa1111_gpio_set_multiple(struct gpio_chip *gc, unsigned long *mask,
 	sa1111_gpio_modify(reg + SA1111_GPIO_PCDWR, (msk >> 12) & 255, val >> 12);
 	sa1111_gpio_modify(reg + SA1111_GPIO_PCSSR, (msk >> 12) & 255, val >> 12);
 	spin_unlock_irqrestore(&sachip->lock, flags);
+
+	return 0;
 }
 
 static int sa1111_gpio_to_irq(struct gpio_chip *gc, unsigned offset)
@@ -616,7 +618,7 @@ static int sa1111_setup_gpios(struct sa1111 *sachip)
 	sachip->gc.direction_output = sa1111_gpio_direction_output;
 	sachip->gc.get = sa1111_gpio_get;
 	sachip->gc.set_rv = sa1111_gpio_set;
-	sachip->gc.set_multiple = sa1111_gpio_set_multiple;
+	sachip->gc.set_multiple_rv = sa1111_gpio_set_multiple;
 	sachip->gc.to_irq = sa1111_gpio_to_irq;
 	sachip->gc.base = -1;
 	sachip->gc.ngpio = 18;

arch/arm/mach-highbank/highbank.c

@@ -143,7 +143,7 @@ static void __init highbank_init(void)
 	sregs_base = of_iomap(np, 0);
 	WARN_ON(!sregs_base);
 
-	pm_power_off = highbank_power_off;
+	register_platform_power_off(highbank_power_off);
 	highbank_pm_init();
 
 	bus_register_notifier(&platform_bus_type, &highbank_platform_nb);

arch/arm/mach-mediatek/Kconfig

@@ -15,6 +15,10 @@ config MACH_MT2701
 	bool "MediaTek MT2701 SoCs support"
 	default ARCH_MEDIATEK
 
+config MACH_MT6572
+	bool "MediaTek MT6572 SoCs support"
+	default ARCH_MEDIATEK
+
 config MACH_MT6589
 	bool "MediaTek MT6589 SoCs support"
 	default ARCH_MEDIATEK

arch/arm/mach-mediatek/mediatek.c

@@ -38,6 +38,7 @@ static void __init mediatek_timer_init(void)
 
 static const char * const mediatek_board_dt_compat[] = {
 	"mediatek,mt2701",
+	"mediatek,mt6572",
 	"mediatek,mt6589",
 	"mediatek,mt6592",
 	"mediatek,mt7623",

arch/arm/mach-mediatek/platsmp.c

@@ -29,6 +29,12 @@ static const struct mtk_smp_boot_info mtk_mt8135_tz_boot = {
 	{ 0x3f8, 0x3f8, 0x3f8 },
 };
 
+static const struct mtk_smp_boot_info mtk_mt6572_boot = {
+	0x10001400, 0x08,
+	{ 0x534c4131 },
+	{ 0x0c },
+};
+
 static const struct mtk_smp_boot_info mtk_mt6589_boot = {
 	0x10002000, 0x34,
 	{ 0x534c4131, 0x4c415332, 0x41534c33 },
@@ -49,6 +55,7 @@ static const struct of_device_id mtk_tz_smp_boot_infos[] __initconst = {
 };
 
 static const struct of_device_id mtk_smp_boot_infos[] __initconst = {
+	{ .compatible   = "mediatek,mt6572", .data = &mtk_mt6572_boot },
 	{ .compatible   = "mediatek,mt6589", .data = &mtk_mt6589_boot },
 	{ .compatible   = "mediatek,mt7623", .data = &mtk_mt7623_boot },
 	{ .compatible   = "mediatek,mt7629", .data = &mtk_mt7623_boot },

arch/arm/mach-pxa/spitz.c

@@ -1096,7 +1096,7 @@ static void __init spitz_init(void)
 		software_node_register(&spitz_scoop_2_gpiochip_node);
 
 	init_gpio_reset(SPITZ_GPIO_ON_RESET, 1, 0);
-	pm_power_off = spitz_poweroff;
+	register_platform_power_off(spitz_poweroff);
 
 	PMCR = 0x00;
 

arch/arm/mach-rockchip/platsmp.c

@@ -279,11 +279,6 @@ static void __init rockchip_smp_prepare_cpus(unsigned int max_cpus)
 	}
 
 	if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9) {
-		if (rockchip_smp_prepare_sram(node)) {
-			of_node_put(node);
-			return;
-		}
-
 		/* enable the SCU power domain */
 		pmu_set_power_domain(PMU_PWRDN_SCU, true);
 
@@ -316,11 +311,19 @@ static void __init rockchip_smp_prepare_cpus(unsigned int max_cpus)
 		asm ("mrc p15, 1, %0, c9, c0, 2\n" : "=r" (l2ctlr));
 		ncores = ((l2ctlr >> 24) & 0x3) + 1;
 	}
-	of_node_put(node);
 
 	/* Make sure that all cores except the first are really off */
 	for (i = 1; i < ncores; i++)
 		pmu_set_power_domain(0 + i, false);
+
+	if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9) {
+		if (rockchip_smp_prepare_sram(node)) {
+			of_node_put(node);
+			return;
+		}
+	}
+
+	of_node_put(node);
 }
 
 static void __init rk3036_smp_prepare_cpus(unsigned int max_cpus)

arch/arm/mach-sa1100/generic.c

@@ -298,7 +298,7 @@ static struct platform_device *sa11x0_devices[] __initdata = {
 static int __init sa1100_init(void)
 {
 	struct resource wdt_res = DEFINE_RES_MEM(0x90000000, 0x20);
-	pm_power_off = sa1100_power_off;
+	register_platform_power_off(sa1100_power_off);
 
 	regulator_has_full_constraints();
 

arch/arm/mach-tegra/reset.c

@@ -63,7 +63,7 @@ static void __init tegra_cpu_reset_handler_enable(void)
 	BUG_ON(is_enabled);
 	BUG_ON(tegra_cpu_reset_handler_size > TEGRA_IRAM_RESET_HANDLER_SIZE);
 
-	memcpy(iram_base, (void *)__tegra_cpu_reset_handler_start,
+	memcpy_toio(iram_base, (void *)__tegra_cpu_reset_handler_start,
 			tegra_cpu_reset_handler_size);
 
 	err = call_firmware_op(set_cpu_boot_addr, 0, reset_address);

arch/arm/mach-vt8500/vt8500.c

@@ -141,7 +141,7 @@ static void __init vt8500_init(void)
 			pr_err("%s:ioremap(power_off) failed\n", __func__);
 	}
 	if (pmc_base)
-		pm_power_off = &vt8500_power_off;
+		register_platform_power_off(vt8500_power_off);
 	else
 		pr_err("%s: PMC Hibernation register could not be remapped, not enabling power off!\n", __func__);
 }