Merge tag 'input-for-v6.8-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input updates from Dmitry Torokhov:

 - a new driver for Adafruit Seesaw gamepad device

 - Zforce touchscreen will handle standard device properties for axis
   swap/inversion

 - handling of advanced sensitivity settings in Microchip CAP11xx
   capacitive sensor driver

 - more drivers have been converted to use newer gpiod API

 - support for dedicated wakeup IRQs in gpio-keys dirver

 - support for slider gestures and OTP variants in iqs269a driver

 - atkbd will report keyboard version as 0xab83 in cases when GET ID
   command was skipped (to deal with problematic firmware on newer
   laptops), restoring the previous behavior

 - other assorted cleanups and changes

* tag 'input-for-v6.8-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (44 commits)
  Input: atkbd - use ab83 as id when skipping the getid command
  Input: driver for Adafruit Seesaw Gamepad
  dt-bindings: input: bindings for Adafruit Seesaw Gamepad
  Input: da9063_onkey - avoid explicitly setting input's parent
  Input: da9063_onkey - avoid using OF-specific APIs
  Input: iqs269a - add support for OTP variants
  dt-bindings: input: iqs269a: Add bindings for OTP variants
  Input: iqs269a - add support for slider gestures
  dt-bindings: input: iqs269a: Add bindings for slider gestures
  Input: gpio-keys - filter gpio_keys -EPROBE_DEFER error messages
  Input: zforce_ts - accept standard touchscreen properties
  dt-bindings: touchscreen: neonode,zforce: Use standard properties
  dt-bindings: touchscreen: convert neonode,zforce to json-schema
  dt-bindings: input: convert drv266x to json-schema
  Input: da9063 - use dev_err_probe()
  Input: da9063 - drop redundant prints in probe()
  Input: da9063 - simplify obtaining OF match data
  Input: as5011 - convert to GPIO descriptor
  Input: omap-keypad - drop optional GPIO support
  Input: tca6416-keypad - drop unused include
  ...

Author: torvalds

Documentation/devicetree/bindings/input/adafruit,seesaw-gamepad.yaml

@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/adafruit,seesaw-gamepad.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Adafruit Mini I2C Gamepad with seesaw
+
+maintainers:
+  - Anshul Dalal <anshulusr@gmail.com>
+
+description: |
+  Adafruit Mini I2C Gamepad
+
+    +-----------------------------+
+    |   ___                       |
+    |  /   \               (X)    |
+    | |  S  |  __   __  (Y)   (A) |
+    |  \___/  |ST| |SE|    (B)    |
+    |                             |
+    +-----------------------------+
+
+  S -> 10-bit precision bidirectional analog joystick
+  ST -> Start
+  SE -> Select
+  X, A, B, Y -> Digital action buttons
+
+  Datasheet: https://cdn-learn.adafruit.com/downloads/pdf/gamepad-qt.pdf
+  Product page: https://www.adafruit.com/product/5743
+  Arduino Driver: https://github.com/adafruit/Adafruit_Seesaw
+
+properties:
+  compatible:
+    const: adafruit,seesaw-gamepad
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+    description:
+      The gamepad's IRQ pin triggers a rising edge if interrupts are enabled.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        joystick@50 {
+            compatible = "adafruit,seesaw-gamepad";
+            interrupts = <18 IRQ_TYPE_EDGE_RISING>;
+            reg = <0x50>;
+        };
+    };

Documentation/devicetree/bindings/input/gpio-keys.yaml

@@ -31,7 +31,23 @@ patternProperties:
         maxItems: 1
 
       interrupts:
-        maxItems: 1
+        oneOf:
+          - items:
+              - description: Optional key interrupt or wakeup interrupt
+          - items:
+              - description: Key interrupt
+              - description: Wakeup interrupt
+
+      interrupt-names:
+        description:
+          Optional interrupt names, can be used to specify a separate dedicated
+          wake-up interrupt in addition to the gpio irq
+        oneOf:
+          - items:
+              - enum: [ irq, wakeup ]
+          - items:
+              - const: irq
+              - const: wakeup
 
       label:
         description: Descriptive name of the key.
@@ -97,6 +113,20 @@ patternProperties:
       - required:
           - gpios
 
+    allOf:
+      - if:
+          properties:
+            interrupts:
+              minItems: 2
+          required:
+            - interrupts
+        then:
+          properties:
+            interrupt-names:
+              minItems: 2
+          required:
+            - interrupt-names
+
     dependencies:
       wakeup-event-action: [ wakeup-source ]
       linux,input-value: [ gpios ]
@@ -137,6 +167,15 @@ examples:
             linux,code = <108>;
             interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
         };
+
+        key-wakeup {
+            label = "GPIO Key WAKEUP";
+            linux,code = <143>;
+            interrupts-extended = <&intc 2 IRQ_TYPE_EDGE_FALLING>,
+                                  <&intc_wakeup 0 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "irq", "wakeup";
+            wakeup-source;
+        };
     };
 
 ...

Documentation/devicetree/bindings/input/gpio-mouse.txt

@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/gpio-mouse.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO attached mouse
+
+description: |
+  This simply uses standard GPIO handles to define a simple mouse connected
+  to 5-7 GPIO lines.
+
+maintainers:
+  - Anshul Dalal <anshulusr@gmail.com>
+
+properties:
+  compatible:
+    const: gpio-mouse
+
+  scan-interval-ms:
+    maxItems: 1
+
+  up-gpios:
+    maxItems: 1
+
+  down-gpios:
+    maxItems: 1
+
+  left-gpios:
+    maxItems: 1
+
+  right-gpios:
+    maxItems: 1
+
+  button-left-gpios:
+    maxItems: 1
+
+  button-middle-gpios:
+    maxItems: 1
+
+  button-right-gpios:
+    maxItems: 1
+
+required:
+  - compatible
+  - scan-interval-ms
+  - up-gpios
+  - down-gpios
+  - left-gpios
+  - right-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    gpio-mouse {
+        compatible = "gpio-mouse";
+        scan-interval-ms = <50>;
+        up-gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+        down-gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+        left-gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+        right-gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+        button-left-gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
+        button-middle-gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+        button-right-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+    };

Documentation/devicetree/bindings/input/gpio-mouse.yaml

@@ -9,6 +9,9 @@ title: Azoteq IQS269A Capacitive Touch Controller
 maintainers:
   - Jeff LaBundy <jeff@labundy.com>
 
+allOf:
+  - $ref: input.yaml#
+
 description: |
   The Azoteq IQS269A is an 8-channel capacitive touch controller that features
   additional Hall-effect and inductive sensing capabilities.
@@ -17,7 +20,10 @@ description: |
 
 properties:
   compatible:
-    const: azoteq,iqs269a
+    enum:
+      - azoteq,iqs269a
+      - azoteq,iqs269a-00
+      - azoteq,iqs269a-d0
 
   reg:
     maxItems: 1
@@ -204,6 +210,73 @@ properties:
     default: 1
     description: Specifies the slider coordinate filter strength.
 
+  azoteq,touch-hold-ms:
+    multipleOf: 256
+    minimum: 256
+    maximum: 65280
+    default: 5120
+    description:
+      Specifies the length of time (in ms) for which the channel selected by
+      'azoteq,gpio3-select' must be held in a state of touch in order for an
+      approximately 60-ms pulse to be asserted on the GPIO4 pin.
+
+  linux,keycodes:
+    minItems: 1
+    maxItems: 8
+    description: |
+      Specifies the numeric keycodes associated with each available gesture in
+      the following order (enter 0 for unused gestures):
+      0: Slider 0 tap
+      1: Slider 0 hold
+      2: Slider 0 positive flick or swipe
+      3: Slider 0 negative flick or swipe
+      4: Slider 1 tap
+      5: Slider 1 hold
+      6: Slider 1 positive flick or swipe
+      7: Slider 1 negative flick or swipe
+
+  azoteq,gesture-swipe:
+    type: boolean
+    description:
+      Directs the device to interpret axial gestures as a swipe (finger remains
+      on slider) instead of a flick (finger leaves slider).
+
+  azoteq,timeout-tap-ms:
+    multipleOf: 16
+    minimum: 0
+    maximum: 4080
+    default: 400
+    description:
+      Specifies the length of time (in ms) within which a slider touch must be
+      released in order to be interpreted as a tap. Default and maximum values
+      as well as step size are reduced by a factor of 4 with device version 2.
+
+  azoteq,timeout-swipe-ms:
+    multipleOf: 16
+    minimum: 0
+    maximum: 4080
+    default: 2000
+    description:
+      Specifies the length of time (in ms) within which an axial gesture must be
+      completed in order to be interpreted as a flick or swipe. Default and max-
+      imum values as well as step size are reduced by a factor of 4 with device
+      version 2.
+
+  azoteq,thresh-swipe:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 255
+    default: 128
+    description:
+      Specifies the number of points across which an axial gesture must travel
+      in order to be interpreted as a flick or swipe.
+
+dependencies:
+  azoteq,gesture-swipe: ["linux,keycodes"]
+  azoteq,timeout-tap-ms: ["linux,keycodes"]
+  azoteq,timeout-swipe-ms: ["linux,keycodes"]
+  azoteq,thresh-swipe: ["linux,keycodes"]
+
 patternProperties:
   "^channel@[0-7]$":
     type: object
@@ -454,6 +527,21 @@ patternProperties:
 
     additionalProperties: false
 
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - azoteq,iqs269a-d0
+then:
+  patternProperties:
+    "^channel@[0-7]$":
+      properties:
+        azoteq,slider1-select: false
+else:
+  properties:
+    azoteq,touch-hold-ms: false
+
 required:
   - compatible
   - reg
@@ -484,6 +572,14 @@ examples:
                     azoteq,hall-enable;
                     azoteq,suspend-mode = <2>;
 
+                    linux,keycodes = <KEY_PLAYPAUSE>,
+                                     <KEY_STOPCD>,
+                                     <KEY_NEXTSONG>,
+                                     <KEY_PREVIOUSSONG>;
+
+                    azoteq,timeout-tap-ms = <400>;
+                    azoteq,timeout-swipe-ms = <800>;
+
                     channel@0 {
                             reg = <0x0>;
 

Documentation/devicetree/bindings/input/iqs269a.yaml

@@ -90,26 +90,4 @@ required:
 
 unevaluatedProperties: false
 
-examples:
-  - |
-    #include <dt-bindings/input/input.h>
-    #include <dt-bindings/interrupt-controller/arm-gic.h>
-
-    pmic {
-        compatible = "mediatek,mt6397";
-
-        keys {
-          compatible = "mediatek,mt6397-keys";
-          mediatek,long-press-mode = <1>;
-          power-off-time-sec = <0>;
-
-          key-power {
-            linux,keycodes = <KEY_POWER>;
-            wakeup-source;
-          };
-
-          key-home {
-            linux,keycodes = <KEY_VOLUMEDOWN>;
-          };
-        };
-    };
+...