Revert "Documentation: kernel-parameters: Add DEVNAME:0.0 format for serial ports"

This reverts commit 5c3a766.

Let's roll back all of the serial core and printk console changes that
went into 6.10-rc1 as there still are problems with them that need to be
sorted out.

Link: https://lore.kernel.org/r/ZnpRozsdw6zbjqze@tlindgre-MOBL1
Reported-by: Petr Mladek <pmladek@suse.com>
Reported-by: Tony Lindgren <tony@atomide.com>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Author: gregkh

Documentation/admin-guide/kernel-parameters.txt

@@ -788,25 +788,6 @@
 			Documentation/networking/netconsole.rst for an
 			alternative.
 
-		<DEVNAME>:<n>.<n>[,options]
-			Use the specified serial port on the serial core bus.
-			The addressing uses DEVNAME of the physical serial port
-			device, followed by the serial core controller instance,
-			and the serial port instance. The options are the same
-			as documented for the ttyS addressing above.
-
-			The mapping of the serial ports to the tty instances
-			can be viewed with:
-
-			$ ls -d /sys/bus/serial-base/devices/*:*.*/tty/*
-			/sys/bus/serial-base/devices/00:04:0.0/tty/ttyS0
-
-			In the above example, the console can be addressed with
-			console=00:04:0.0. Note that a console addressed this
-			way will only get added when the related device driver
-			is ready. The use of an earlycon parameter in addition to
-			the console may be desired for console output early on.
-
 		uart[8250],io,<addr>[,options]
 		uart[8250],mmio,<addr>[,options]
 		uart[8250],mmio16,<addr>[,options]