Merge tag 'mips_6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

Pull MIPS updates from Thomas Bogendoerfer:

 - Add support for multi-cluster configuration

 - Add quirks for enabling multi-cluster mode on EyeQ6

 - Add DTS clocks for ralink

 - Cleanup realtek DTS

 - Other cleanups and fixes

* tag 'mips_6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (35 commits)
  MIPS: config: omega2+, vocore2: enable CLK_MTMIPS
  arch: mips: defconfig: Drop obsolete CONFIG_NET_CLS_TCINDEX
  MIPS: cm: Fix warning if MIPS_CM is disabled
  MIPS: Fix Macro name
  MIPS: ds1287: Match ds1287_set_base_clock() function types
  MIPS: cevt-ds1287: Add missing ds1287.h include
  MIPS: dec: Declare which_prom() as static
  MIPS: Loongson2ef: Replace deprecated strncpy() with strscpy()
  mips: dts: ralink: mt7628a: update system controller node and its consumers
  mips: dts: ralink: mt7620a: update system controller node and its consumers
  mips: dts: ralink: rt3883: update system controller node and its consumers
  mips: dts: ralink: rt3050: update system controller node and its consumers
  mips: dts: ralink: rt2880: update system controller node and its consumers
  dt-bindings: clock: add clock definitions for Ralink SoCs
  MIPS: Use arch specific syscall name match function
  mips: dts: realtek: Add restart to Cisco SG220-26P
  mips: dts: realtek: Add RTL838x SoC peripherals
  mips: dts: realtek: Replace uart clock property
  mips: dts: realtek: Correct uart interrupt-parent
  mips: dts: realtek: Add SoC IRQ node for RTL838x
  ...

Author: torvalds

Documentation/devicetree/bindings/clock/mediatek,mtmips-sysc.yaml

@@ -18,6 +18,12 @@ description: |
   These SoCs have an XTAL from where the cpu clock is
   provided as well as derived clocks for the bus and the peripherals.
 
+  Each clock is assigned an identifier and client nodes use this identifier
+  to specify the clock which they consume.
+
+  All these identifiers could be found in:
+  [1]: <include/dt-bindings/clock/mediatek,mtmips-sysc.h>.
+
 properties:
   compatible:
     items:
@@ -38,7 +44,8 @@ properties:
 
   '#clock-cells':
     description:
-      The first cell indicates the clock number.
+      The first cell indicates the clock number, see [1] for available
+      clocks.
     const: 1
 
   '#reset-cells':
@@ -56,6 +63,8 @@ additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/clock/mediatek,mtmips-sysc.h>
+
     syscon@0 {
       compatible = "ralink,rt5350-sysc", "syscon";
       reg = <0x0 0x100>;

Documentation/devicetree/bindings/mips/mti,mips-cm.yaml

@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mips/mti,mips-cm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MIPS Coherence Manager
+
+description:
+  The Coherence Manager (CM) is responsible for establishing the
+  global ordering of requests from all elements of the system and
+  sending the correct data back to the requester. It supports Cache
+  to Cache transfers.
+  https://training.mips.com/cps_mips/PDF/CPS_Introduction.pdf
+  https://training.mips.com/cps_mips/PDF/Coherency_Manager.pdf
+
+maintainers:
+  - Jiaxun Yang <jiaxun.yang@flygoat.com>
+
+properties:
+  compatible:
+    oneOf:
+      - const: mti,mips-cm
+      - const: mobileye,eyeq6-cm
+        description:
+          On EyeQ6 the HCI (Hardware Cache Initialization) information for
+          the L2 cache in multi-cluster configuration is broken.
+
+  reg:
+    description:
+      Base address and size of the Global Configuration Registers
+      referred to as CMGCR.They are the system programmer's interface
+      to the Coherency Manager. Their location in the memory map is
+      determined at core build time. In a functional system, the base
+      address is provided by the Coprocessor 0, but some
+      System-on-Chip (SoC) designs may not provide an accurate address
+      that needs to be described statically.
+
+    maxItems: 1
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    coherency-manager@1fbf8000 {
+      compatible = "mti,mips-cm";
+      reg = <0x1bde8000 0x8000>;
+    };
+
+  - |
+    coherency-manager {
+      compatible = "mobileye,eyeq6-cm";
+    };
+...

arch/mips/boot/dts/ingenic/gcw0.dts

@@ -91,7 +91,7 @@
 			"MIC1N", "Built-in Mic";
 		simple-audio-card,pin-switches = "Speaker", "Headphones";
 
-		simple-audio-card,hp-det-gpio = <&gpf 21 GPIO_ACTIVE_LOW>;
+		simple-audio-card,hp-det-gpios = <&gpf 21 GPIO_ACTIVE_LOW>;
 		simple-audio-card,aux-devs = <&speaker_amp>, <&headphones_amp>;
 
 		simple-audio-card,bitclock-master = <&dai_codec>;

arch/mips/boot/dts/ingenic/rs90.dts

@@ -148,7 +148,7 @@
 			"Speaker", "OUTR";
 		simple-audio-card,pin-switches = "Speaker";
 
-		simple-audio-card,hp-det-gpio = <&gpd 16 GPIO_ACTIVE_LOW>;
+		simple-audio-card,hp-det-gpios = <&gpd 16 GPIO_ACTIVE_LOW>;
 		simple-audio-card,aux-devs = <&amp>;
 
 		simple-audio-card,bitclock-master = <&dai_codec>;

arch/mips/boot/dts/mobileye/eyeq6h.dtsi

@@ -32,6 +32,10 @@
 		#interrupt-cells = <1>;
 	};
 
+	coherency-manager {
+		compatible = "mobileye,eyeq6-cm";
+	};
+
 	xtal: clock-30000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;

arch/mips/boot/dts/ralink/gardena_smart_gateway_mt7688.dts

@@ -5,7 +5,7 @@
 
 /dts-v1/;
 
-/include/ "mt7628a.dtsi"
+#include "mt7628a.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>

arch/mips/boot/dts/ralink/mt7620a.dtsi

@@ -1,4 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/clock/mediatek,mtmips-sysc.h>
+
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
@@ -25,9 +27,11 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 
-		sysc@0 {
-			compatible = "ralink,mt7620a-sysc";
+		sysc: syscon@0 {
+			compatible = "ralink,mt7620-sysc", "syscon";
 			reg = <0x0 0x100>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
 		};
 
 		intc: intc@200 {
@@ -50,6 +54,8 @@
 			compatible = "ralink,mt7620a-uart", "ralink,rt2880-uart", "ns16550a";
 			reg = <0xc00 0x100>;
 
+			clocks = <&sysc MT7620_CLK_UARTLITE>;
+
 			interrupt-parent = <&intc>;
 			interrupts = <12>;
 

arch/mips/boot/dts/ralink/mt7620a_eval.dts

@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
-/include/ "mt7620a.dtsi"
+#include "mt7620a.dtsi"
 
 / {
 	compatible = "ralink,mt7620a-eval-board", "ralink,mt7620a-soc";

arch/mips/boot/dts/ralink/mt7628a.dtsi

@@ -1,4 +1,5 @@
 // SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/clock/mediatek,mtmips-sysc.h>
 
 / {
 	#address-cells = <1>;
@@ -16,11 +17,6 @@
 		};
 	};
 
-	resetc: reset-controller {
-		compatible = "ralink,rt2880-reset";
-		#reset-cells = <1>;
-	};
-
 	cpuintc: interrupt-controller {
 		#address-cells = <0>;
 		#interrupt-cells = <1>;
@@ -36,9 +32,11 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 
-		sysc: system-controller@0 {
-			compatible = "ralink,mt7620a-sysc", "syscon";
+		sysc: syscon@0 {
+			compatible = "ralink,mt7628-sysc", "syscon";
 			reg = <0x0 0x60>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
 		};
 
 		pinmux: pinmux@60 {
@@ -138,7 +136,7 @@
 			compatible = "mediatek,mt7621-wdt";
 			reg = <0x100 0x30>;
 
-			resets = <&resetc 8>;
+			resets = <&sysc 8>;
 			reset-names = "wdt";
 
 			interrupt-parent = <&intc>;
@@ -154,7 +152,7 @@
 			interrupt-controller;
 			#interrupt-cells = <1>;
 
-			resets = <&resetc 9>;
+			resets = <&sysc 9>;
 			reset-names = "intc";
 
 			interrupt-parent = <&cpuintc>;
@@ -190,7 +188,9 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinmux_spi_spi>;
 
-			resets = <&resetc 18>;
+			clocks = <&sysc MT76X8_CLK_SPI1>;
+
+			resets = <&sysc 18>;
 			reset-names = "spi";
 
 			#address-cells = <1>;
@@ -206,7 +206,9 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinmux_i2c_i2c>;
 
-			resets = <&resetc 16>;
+			clocks = <&sysc MT76X8_CLK_I2C>;
+
+			resets = <&sysc 16>;
 			reset-names = "i2c";
 
 			#address-cells = <1>;
@@ -222,7 +224,9 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinmux_uart0_uart>;
 
-			resets = <&resetc 12>;
+			clocks = <&sysc MT76X8_CLK_UART0>;
+
+			resets = <&sysc 12>;
 			reset-names = "uart0";
 
 			interrupt-parent = <&intc>;
@@ -238,7 +242,9 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinmux_uart1_uart>;
 
-			resets = <&resetc 19>;
+			clocks = <&sysc MT76X8_CLK_UART1>;
+
+			resets = <&sysc 19>;
 			reset-names = "uart1";
 
 			interrupt-parent = <&intc>;
@@ -254,7 +260,9 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinmux_uart2_uart>;
 
-			resets = <&resetc 20>;
+			clocks = <&sysc MT76X8_CLK_UART2>;
+
+			resets = <&sysc 20>;
 			reset-names = "uart2";
 
 			interrupt-parent = <&intc>;
@@ -271,7 +279,7 @@
 		#phy-cells = <0>;
 
 		ralink,sysctl = <&sysc>;
-		resets = <&resetc 22 &resetc 25>;
+		resets = <&sysc 22 &sysc 25>;
 		reset-names = "host", "device";
 	};
 
@@ -290,6 +298,8 @@
 		compatible = "mediatek,mt7628-wmac";
 		reg = <0x10300000 0x100000>;
 
+		clocks = <&sysc MT76X8_CLK_WMAC>;
+
 		interrupt-parent = <&cpuintc>;
 		interrupts = <6>;
 

arch/mips/boot/dts/ralink/omega2p.dts

@@ -1,6 +1,6 @@
 /dts-v1/;
 
-/include/ "mt7628a.dtsi"
+#include "mt7628a.dtsi"
 
 / {
 	compatible = "onion,omega2+", "ralink,mt7688a-soc", "ralink,mt7628a-soc";