thermal/drivers/mediatek/lvts: Start sensor interrupts disabled

Interrupts are enabled per sensor in lvts_update_irq_mask() as needed,
there's no point in enabling all of them during initialization. Change
the MONINT register initial value so all sensor interrupts start
disabled.

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20250113-mt8192-lvts-filtered-suspend-fix-v2-4-07a25200c7c6@collabora.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

Author: nfraprado

drivers/thermal/mediatek/lvts_thermal.c

@@ -65,7 +65,6 @@
 #define LVTS_HW_FILTER				0x0
 #define LVTS_TSSEL_CONF				0x13121110
 #define LVTS_CALSCALE_CONF			0x300
-#define LVTS_MONINT_CONF			0x0300318C
 
 #define LVTS_MONINT_OFFSET_HIGH_INTEN_SENSOR0		BIT(3)
 #define LVTS_MONINT_OFFSET_HIGH_INTEN_SENSOR1		BIT(8)
@@ -951,7 +950,7 @@ static int lvts_irq_init(struct lvts_ctrl *lvts_ctrl)
 	 * The LVTS_MONINT register layout is the same as the LVTS_MONINTSTS
 	 * register, except we set the bits to enable the interrupt.
 	 */
-	writel(LVTS_MONINT_CONF, LVTS_MONINT(lvts_ctrl->base));
+	writel(0, LVTS_MONINT(lvts_ctrl->base));
 
 	return 0;
 }