Merge tag 'at91-dt-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/dt

Microchip AT91 device tree updates for v6.13

It contains:
- device tree support for the Microchip SAM9X7 SoC and the Microchip
  SAM9X75 Curiosity board
- enable power monitor support for SAM9X60-EK, SAMA5D2-ICP,
  SAMA7G45 Curiosity, SAMA7G5-EK boards
- updates the uart nodes with missing properties
- device tree cleanups

* tag 'at91-dt-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
  ARM: dts: microchip: sam9x75_curiosity: add sam9x75 curiosity board
  dt-bindings: arm: add sam9x75 curiosity board
  ARM: dts: at91: sam9x7: add device tree for SoC
  ARM: dts: microchip: Rename LED sub nodes name
  ARM: dts: microchip: Rename the pmic node
  ARM: dts: microchip: Rename the eeprom nodename
  ARM: dts: microchip: sama7g5ek: Add power monitor support
  ARM: dts: microchip: sama7g54_curiosity: Add power monitor support
  ARM: dts: microchip: sama5d2_icp: Add power monitor support
  ARM: dts: microchip: sam9x60ek: Add power monitor support
  ARM: dts: microchip: Unify rng node names
  ARM: dts: microchip: Add trng labels for all at91 SoCs
  ARM: dts: microchip: sam9x60: Add missing property atmel,usart-mode

Link: https://lore.kernel.org/r/20241113182050.2176500-2-claudiu.beznea@tuxon.dev
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Author: arndb

Documentation/devicetree/bindings/arm/atmel-at91.yaml

@@ -106,6 +106,12 @@ properties:
           - const: microchip,sam9x60
           - const: atmel,at91sam9
 
+      - description: Microchip SAM9X7 Evaluation Boards
+        items:
+          - const: microchip,sam9x75-curiosity
+          - const: microchip,sam9x7
+          - const: atmel,at91sam9
+
       - description: Nattis v2 board with Natte v2 power board
         items:
           - const: axentia,nattis-2

arch/arm/boot/dts/microchip/Makefile

@@ -2,6 +2,7 @@
 # Enables support for device-tree overlays
 DTC_FLAGS_at91-sam9x60_curiosity := -@
 DTC_FLAGS_at91-sam9x60ek := -@
+DTC_FLAGS_at91-sam9x75_curiosity := -@
 DTC_FLAGS_at91-sama5d27_som1_ek := -@
 DTC_FLAGS_at91-sama5d27_wlsom1_ek := -@
 DTC_FLAGS_at91-sama5d29_curiosity := -@
@@ -60,6 +61,8 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \
 dtb-$(CONFIG_SOC_SAM9X60) += \
 	at91-sam9x60_curiosity.dtb \
 	at91-sam9x60ek.dtb
+dtb-$(CONFIG_SOC_SAM9X7) += \
+	at91-sam9x75_curiosity.dtb
 dtb-$(CONFIG_SOC_SAM_V7) += \
 	at91-kizbox2-2.dtb \
 	at91-kizbox3-hs.dtb \

arch/arm/boot/dts/microchip/aks-cdu.dts

@@ -98,23 +98,27 @@
 	leds {
 		compatible = "gpio-leds";
 
-		red {
+		led-red {
+			label = "red";
 			gpios = <&pioC 10 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "none";
 		};
 
-		green {
+		led-green {
+			label = "green";
 			gpios = <&pioA 5 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "none";
 			default-state = "on";
 		};
 
-		yellow {
+		led-yellow {
+			label = "yellow";
 			gpios = <&pioB 20 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "none";
 		};
 
-		blue {
+		led-blue {
+			label = "blue";
 			gpios = <&pioB 21 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "none";
 		};

arch/arm/boot/dts/microchip/animeo_ip.dts

@@ -146,23 +146,23 @@
 	leds {
 		compatible = "gpio-leds";
 
-		power_green {
+		led-power-green {
 			label = "power_green";
 			gpios = <&pioC 17 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 
-		power_red {
+		led-power-red {
 			label = "power_red";
 			gpios = <&pioA 2 GPIO_ACTIVE_HIGH>;
 		};
 
-		tx_green {
+		led-tx-green {
 			label = "tx_green";
 			gpios = <&pioC 19 GPIO_ACTIVE_HIGH>;
 		};
 
-		tx_red {
+		led-tx-red {
 			label = "tx_red";
 			gpios = <&pioC 18 GPIO_ACTIVE_HIGH>;
 		};

arch/arm/boot/dts/microchip/at91-kizbox2-common.dtsi

@@ -85,7 +85,7 @@
 &i2c1 {
 	status = "okay";
 
-	pmic: act8865@5b {
+	act8865: pmic@5b {
 		compatible = "active-semi,act8865";
 		reg = <0x5b>;
 		status = "okay";

arch/arm/boot/dts/microchip/at91-sam9x60ek.dts

@@ -53,17 +53,17 @@
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 		status = "okay"; /* Conflict with pwm0. */
 
-		red {
+		led-red {
 			label = "red";
 			gpios = <&pioB 11 GPIO_ACTIVE_HIGH>;
 		};
 
-		green {
+		led-green {
 			label = "green";
 			gpios = <&pioB 12 GPIO_ACTIVE_HIGH>;
 		};
 
-		blue {
+		led-blue {
 			label = "blue";
 			gpios = <&pioB 13 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
@@ -260,6 +260,37 @@
 		i2c-digital-filter-width-ns = <35>;
 		status = "okay";
 
+		power-monitor@17 {
+			compatible = "microchip,pac1934";
+			reg = <0x17>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@1 {
+				reg = <0x1>;
+				shunt-resistor-micro-ohms = <10000>;
+				label = "VDDIOM";
+			};
+
+			channel@2 {
+				reg = <0x2>;
+				shunt-resistor-micro-ohms = <10000>;
+				label = "VDDCORE";
+			};
+
+			channel@3 {
+				reg = <0x3>;
+				shunt-resistor-micro-ohms = <10000>;
+				label = "VDD3V3_MPU";
+			};
+
+			channel@4 {
+				reg = <0x4>;
+				shunt-resistor-micro-ohms = <10000>;
+				label = "VDD3V3";
+			};
+		};
+
 		gpio_exp: mcp23008@20 {
 			compatible = "microchip,mcp23008";
 			reg = <0x20>;