net: phy: realtek: Avoid PHYCR2 access if PHYCR2 not present

The driver is currently checking for PHYCR2 register presence in
rtl8211f_config_init(), but it does so after accessing PHYCR2 to
disable EEE. This was introduced in commit bfc17c1 ("net:
phy: realtek: disable PHY-mode EEE"). Move the PHYCR2 presence
test before the EEE disablement and simplify the code.

Fixes: bfc17c1 ("net: phy: realtek: disable PHY-mode EEE")
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20251011110309.12664-1-marek.vasut@mailbox.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Author: Marek Vasut

drivers/net/phy/realtek/realtek_main.c

@@ -633,26 +633,25 @@ static int rtl8211f_config_init(struct phy_device *phydev)
 			str_enabled_disabled(val_rxdly));
 	}
 
+	if (!priv->has_phycr2)
+		return 0;
+
 	/* Disable PHY-mode EEE so LPI is passed to the MAC */
 	ret = phy_modify_paged(phydev, RTL8211F_PHYCR_PAGE, RTL8211F_PHYCR2,
 			       RTL8211F_PHYCR2_PHY_EEE_ENABLE, 0);
 	if (ret)
 		return ret;
 
-	if (priv->has_phycr2) {
-		ret = phy_modify_paged(phydev, RTL8211F_PHYCR_PAGE,
-				       RTL8211F_PHYCR2, RTL8211F_CLKOUT_EN,
-				       priv->phycr2);
-		if (ret < 0) {
-			dev_err(dev, "clkout configuration failed: %pe\n",
-				ERR_PTR(ret));
-			return ret;
-		}
-
-		return genphy_soft_reset(phydev);
+	ret = phy_modify_paged(phydev, RTL8211F_PHYCR_PAGE,
+			       RTL8211F_PHYCR2, RTL8211F_CLKOUT_EN,
+			       priv->phycr2);
+	if (ret < 0) {
+		dev_err(dev, "clkout configuration failed: %pe\n",
+			ERR_PTR(ret));
+		return ret;
 	}
 
-	return 0;
+	return genphy_soft_reset(phydev);
 }
 
 static int rtl821x_suspend(struct phy_device *phydev)