Merge tag 'iio-for-6.17a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

Jonathan writes:

IIO: New device support, features, late breaking fixes and cleanup for 6.17

The normal mixed bag. A few more fixes than usual as I failed to send
them out earlier.

New device support
==================

adi,ad4080
- New driver for this high speed ADC. Includes extensions to iio-backends
  necessary to support filter config, variable data lands and data
  alignment control.
adi,ad4170-4
- New driver for this 24-bit very feature rich ADC suited for weigh scale
  and thermocouple applications.
adi,ad7405
- New driver for this single channel isolated ADC with backend support
  (adi-axi-adc)
google,cros_ec_activity
- Add activity detection to the existing set of cros_ec drivers covering
  both human body and significant motion detection.
mediatek,mt6359
- Add support for MT6363 and MT6373 PMIC Auxiliary ADCs.
nicera,d3-323-aa
- New driver for this configurable Passive InfraRed sensor.

Device ID only
==============

mediatek,mt7981-auxadc
- Add ID to mt2701 driver as fully compatible with mt7986-auxadc.
rohm,bu79100g
- Add ID to ad7476 driver as fully compatible with TI ADS7866.

Features
========
Core
- New in_voltageY_convdelay to allow for devices to control timing
  offsets between sampling different channels.
adi,ad-sigma-delta-library
- Support SPI offload (later fix for missing Kconfig dependency)
adi,ad4851
- SPI 3-wire support.
adi,ad7606
- Power supply control.
- convdelay and calibbias support for calibration purposes.
- gain calibration support based on external filter resistance provided
  from device tree.
adi,ad7768-1
- Add output regulator for VCM output, typically used for preconditioning
  circuits.
- Add gpio controller for the 4 GPIOs.
- Multiple scan type support to enable 16-bit modes.
- Support synchronization over SPI.
- Filter type and oversampling ratio control.
- Low pass filter cut off read only attribute.
adi,adxl313
- FIFO support
- DC activity, inactivity detection with power-save on inactivity
- AC coupled activity detection
- Documentation for this complex driver.
- debugfs register access.
adi,adxl345
- Sampling frequency and sensor range controls.
bosch,bmi270
- Add step counter support.
invensense,icm42600
- Wake on motion support.

Cleanup and fixes
=================

backend
- Drop unused parameter from iio_backend_ovesampling_ratio_set()
docs
- Fix ABI docs around I and Q modifiers.
treewide
- Switch remaining drives to use maple tree regcache.
- Drop use of DRIVER_NAME style definitions when only used in one
  place.
- Drop unused export.h includes.
- Use = { } in place of memset in various drivers.
- Constify various info structures and related.
- Switch some drivers from array of chip_info structures to individual
  named structures.
adi,ad-sigma_delta library
- Fix over allocation of scan buffer. (bits/bytes confusion)
- Sort includes and apply iwyu principles to ensure sensible set.
- Use u8 instead of uint8_t
- Replace hard coded type sizes with sizeof() and BITS_TO_BYTES() as
  appropriate.
- Factor out setting of read address to reduce duplication.
- Switch to buffer predisable so error handling on buffer enable
  functions correctly (balanced against postenable).
adi,ad4000
- Don't use sift_right() on an unsigned value.
adi,ad7173
- Add missing check on spi_setup() succeeding.
- Simplify clock enable disable code using devm_clk_get_enabled()
- Fix channel index for syscalib_mode
- Fix number of configuration slots for some devics.
- Fix the channel used for calibration.
- Fix setting ODR up in probe.
adi,ad7380
- Drop unused oversampling_ratio getter function call as value never
  used.
adi,ad7606
- Exit if invalid dt_schema encountered rather than carrying on with
  unknown config.
adi,ad7768-1
- Ensure SYNC_IN pulse is long enough.
- Switch sampling_frequency_available to read_avail() callback.
adi,ada4250
- Ensuring a dma-safe buffer for regmap_bulk_read()
- Use a local dev variable to simplify code
- Relax chip ID matching to allow for fallback dt compatibles.
- Make use of devm_regulator_get_enabled_read_voltage() to replace
  equivalent code.
- Shuffle elements around in struct to improve logical groupings and
  reduce holes.
- Use dev_err_probe()
adi,adxl313
- Use regcache to reduce traffic.
- Factor out enabling of measurement.
adi,adxl345
- Drop irq from struct as only used locally in code
- Simplify measure enable function using regmap_update_bits()
- Replace some magic numbers by units.h defines
- Simplify interrupt mapping code
- Simplify FIFO read out.
adi,axi-dac
- Factor out code to check for bus free to reduce duplication.
avago,apds9306
- Use a helper to get register address in both get and set functions.
bosch,bmi160+bmi270
- Ensure triggers suspended and resumed correctly.
bosch,bmo055
- Fix theoretical OOB acces to hw_xlate array.
freescale,vf610
- Drop -ENOMEM error message as plenty of existing prints if memory
  allocation fails.
- Use dev_err_probe() and devm_clk_geT_enabled() to simplify probe().
kionix,kx022a
- Apply include what you use principles to includes.
invensense,itg3200
- Add missing dt-binding for this gyroscope.
invensense,icm42600
- Switch from int64_t and similar to s64 and other kernel types.
- Simplify arrangement of DMA safe buffers and potentially reduce
  structure size a little.
invensense,mpu6050
- Reduce duplication in aux read/write code.
- Use sysfs_emit() to replace scnprintf()
murata,irsd200
- Drop duplicate printing of ret in dev_err_probe()
nxp,lpc3220-adc
- Add missing clocks property to dt-binding.
st,spear600
- Convert dt-binding that got left behind in staging to yaml in the main
  tree.
st,stm32-adc
- Use dev_fwnode() rather than directly accessing the of_node.
vti,sca3000
- Use direct returns instead of gotos where simple.

Various other minor typo and white space fixes.

* tag 'iio-for-6.17a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (201 commits)
  iio: adc: ad_sigma_delta: Select IIO_BUFFER_DMAENGINE and SPI_OFFLOAD
  iio: adc: ad7173: fix setting ODR in probe
  iio: adc: ad7173: fix calibration channel
  iio: adc: ad7173: fix num_slots
  iio: adc: ad7173: fix channels index for syscalib_mode
  iio: adc: ad_sigma_delta: change to buffer predisable
  iio: ABI: fix correctness of I and Q modifiers
  iio: Add driver for Nicera D3-323-AA PIR sensor
  dt-bindings: iio: proximity: Add Nicera D3-323-AA PIR sensor
  dt-bindings: vendor-prefixes: Add Nicera
  iio: dac: vf610: Simplify with devm_clk_get_enabled()
  iio: adc: vf610: Simplify with dev_err_probe
  iio: adc: vf610: Drop -ENOMEM error message
  iio: imu: bno055: make bno055_sysfs_attr const
  iio: imu: bno055: fix OOB access of hw_xlate array
  dt-bindings: iio: adc: Add support for MT7981
  iio: accel: kionix-kx022a: Apply approximate iwyu principles to includes
  iio: adc: ad4170-4: Add support for weigh scale, thermocouple, and RTD sens
  iio: adc: ad4170-4: Add support for internal temperature sensor
  iio: adc: ad4170-4: Add GPIO controller support
  ...

Author: gregkh

Documentation/ABI/obsolete/sysfs-bus-iio

@@ -48,10 +48,6 @@ What:		/sys/.../iio:deviceX/scan_elements/in_timestamp_en
 What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_supply_en
 What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_en
 What:		/sys/.../iio:deviceX/scan_elements/in_voltageY-voltageZ_en
-What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_i_en
-What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_q_en
-What:		/sys/.../iio:deviceX/scan_elements/in_voltage_i_en
-What:		/sys/.../iio:deviceX/scan_elements/in_voltage_q_en
 What:		/sys/.../iio:deviceX/scan_elements/in_incli_x_en
 What:		/sys/.../iio:deviceX/scan_elements/in_incli_y_en
 What:		/sys/.../iio:deviceX/scan_elements/in_pressureY_en
@@ -73,10 +69,6 @@ What:		/sys/.../iio:deviceX/scan_elements/in_incli_type
 What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_type
 What:		/sys/.../iio:deviceX/scan_elements/in_voltage_type
 What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_supply_type
-What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_i_type
-What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_q_type
-What:		/sys/.../iio:deviceX/scan_elements/in_voltage_i_type
-What:		/sys/.../iio:deviceX/scan_elements/in_voltage_q_type
 What:		/sys/.../iio:deviceX/scan_elements/in_timestamp_type
 What:		/sys/.../iio:deviceX/scan_elements/in_pressureY_type
 What:		/sys/.../iio:deviceX/scan_elements/in_pressure_type
@@ -110,10 +102,6 @@ Description:
 
 What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_index
 What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_supply_index
-What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_i_index
-What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_q_index
-What:		/sys/.../iio:deviceX/scan_elements/in_voltage_i_index
-What:		/sys/.../iio:deviceX/scan_elements/in_voltage_q_index
 What:		/sys/.../iio:deviceX/scan_elements/in_accel_x_index
 What:		/sys/.../iio:deviceX/scan_elements/in_accel_y_index
 What:		/sys/.../iio:deviceX/scan_elements/in_accel_z_index

Documentation/ABI/testing/sysfs-bus-iio

@@ -141,8 +141,6 @@ Description:
 
 What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_raw
 What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_raw
-What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_i_raw
-What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_q_raw
 KernelVersion:	2.6.35
 Contact:	linux-iio@vger.kernel.org
 Description:
@@ -417,18 +415,14 @@ What:		/sys/bus/iio/devices/iio:deviceX/in_accel_offset
 What:		/sys/bus/iio/devices/iio:deviceX/in_accel_x_offset
 What:		/sys/bus/iio/devices/iio:deviceX/in_accel_y_offset
 What:		/sys/bus/iio/devices/iio:deviceX/in_accel_z_offset
+What:		/sys/bus/iio/devices/iio:deviceX/in_altvoltage_q_offset
+What:		/sys/bus/iio/devices/iio:deviceX/in_altvoltage_i_offset
 What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_offset
 What:		/sys/bus/iio/devices/iio:deviceX/in_voltage_offset
 What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_i_offset
 What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_q_offset
-What:		/sys/bus/iio/devices/iio:deviceX/in_voltage_q_offset
-What:		/sys/bus/iio/devices/iio:deviceX/in_voltage_i_offset
 What:		/sys/bus/iio/devices/iio:deviceX/in_currentY_offset
 What:		/sys/bus/iio/devices/iio:deviceX/in_current_offset
-What:		/sys/bus/iio/devices/iio:deviceX/in_currentY_i_offset
-What:		/sys/bus/iio/devices/iio:deviceX/in_currentY_q_offset
-What:		/sys/bus/iio/devices/iio:deviceX/in_current_q_offset
-What:		/sys/bus/iio/devices/iio:deviceX/in_current_i_offset
 What:		/sys/bus/iio/devices/iio:deviceX/in_tempY_offset
 What:		/sys/bus/iio/devices/iio:deviceX/in_temp_offset
 What:		/sys/bus/iio/devices/iio:deviceX/in_pressureY_offset
@@ -456,21 +450,15 @@ Description:
 		to the _raw output.
 
 What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_scale
-What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_i_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_q_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_voltage_scale
-What:		/sys/bus/iio/devices/iio:deviceX/in_voltage_i_scale
-What:		/sys/bus/iio/devices/iio:deviceX/in_voltage_q_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_voltage-voltage_scale
 What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_scale
 What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_currentY_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_currentY_supply_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_current_scale
-What:		/sys/bus/iio/devices/iio:deviceX/in_currentY_i_scale
-What:		/sys/bus/iio/devices/iio:deviceX/in_currentY_q_scale
-What:		/sys/bus/iio/devices/iio:deviceX/in_current_i_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_current_q_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_accel_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_accel_peak_scale
@@ -559,6 +547,30 @@ Description:
 		- a small discrete set of values like "0 2 4 6 8"
 		- a range specified as "[min step max]"
 
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_convdelay
+KernelVersion:	6.17
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Delay of start of conversion from common reference point shared
+		by all channels. Can be writable when used to compensate for
+		delay variation introduced by external filters feeding a
+		simultaneous sampling ADC.
+
+		E.g., for the ad7606 ADC series, this value is intended as a
+		configurable time delay in seconds, to correct delay introduced
+		by an optional external filtering circuit.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_convdelay_available
+KernelVersion:	6.16
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Available values of convdelay. Maybe expressed as:
+
+		- a range specified as "[min step max]"
+
+		If shared across all channels, <type>_convdelay_available
+		is used.
+
 What:		/sys/bus/iio/devices/iio:deviceX/in_accel_x_calibscale
 What:		/sys/bus/iio/devices/iio:deviceX/in_accel_y_calibscale
 What:		/sys/bus/iio/devices/iio:deviceX/in_accel_z_calibscale
@@ -579,11 +591,7 @@ What:		/sys/bus/iio/devices/iio:deviceX/in_pressure_calibscale
 What:		/sys/bus/iio/devices/iio:deviceX/in_pressureY_calibscale
 What:		/sys/bus/iio/devices/iio:deviceX/in_proximity0_calibscale
 What:		/sys/bus/iio/devices/iio:deviceX/in_voltage_calibscale
-What:		/sys/bus/iio/devices/iio:deviceX/in_voltage_i_calibscale
-What:		/sys/bus/iio/devices/iio:deviceX/in_voltage_q_calibscale
 What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_calibscale
-What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_i_calibscale
-What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_q_calibscale
 What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_calibscale
 What:		/sys/bus/iio/devices/iio:deviceX/out_currentY_calibscale
 What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_calibscale
@@ -805,7 +813,11 @@ Description:
 		all the other channels, since it involves changing the VCO
 		fundamental output frequency.
 
+What:		/sys/bus/iio/devices/iio:deviceX/in_altvoltageY_i_phase
+What:		/sys/bus/iio/devices/iio:deviceX/in_altvoltageY_q_phase
 What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_phase
+What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_i_phase
+What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_q_phase
 KernelVersion:	3.4.0
 Contact:	linux-iio@vger.kernel.org
 Description:
@@ -1434,10 +1446,6 @@ What:		/sys/.../iio:deviceX/bufferY/in_timestamp_en
 What:		/sys/.../iio:deviceX/bufferY/in_voltageY_supply_en
 What:		/sys/.../iio:deviceX/bufferY/in_voltageY_en
 What:		/sys/.../iio:deviceX/bufferY/in_voltageY-voltageZ_en
-What:		/sys/.../iio:deviceX/bufferY/in_voltageY_i_en
-What:		/sys/.../iio:deviceX/bufferY/in_voltageY_q_en
-What:		/sys/.../iio:deviceX/bufferY/in_voltage_i_en
-What:		/sys/.../iio:deviceX/bufferY/in_voltage_q_en
 What:		/sys/.../iio:deviceX/bufferY/in_incli_x_en
 What:		/sys/.../iio:deviceX/bufferY/in_incli_y_en
 What:		/sys/.../iio:deviceX/bufferY/in_pressureY_en
@@ -1458,10 +1466,6 @@ What:		/sys/.../iio:deviceX/bufferY/in_incli_type
 What:		/sys/.../iio:deviceX/bufferY/in_voltageY_type
 What:		/sys/.../iio:deviceX/bufferY/in_voltage_type
 What:		/sys/.../iio:deviceX/bufferY/in_voltageY_supply_type
-What:		/sys/.../iio:deviceX/bufferY/in_voltageY_i_type
-What:		/sys/.../iio:deviceX/bufferY/in_voltageY_q_type
-What:		/sys/.../iio:deviceX/bufferY/in_voltage_i_type
-What:		/sys/.../iio:deviceX/bufferY/in_voltage_q_type
 What:		/sys/.../iio:deviceX/bufferY/in_timestamp_type
 What:		/sys/.../iio:deviceX/bufferY/in_pressureY_type
 What:		/sys/.../iio:deviceX/bufferY/in_pressure_type
@@ -1499,10 +1503,6 @@ Description:
 
 What:		/sys/.../iio:deviceX/bufferY/in_voltageY_index
 What:		/sys/.../iio:deviceX/bufferY/in_voltageY_supply_index
-What:		/sys/.../iio:deviceX/bufferY/in_voltageY_i_index
-What:		/sys/.../iio:deviceX/bufferY/in_voltageY_q_index
-What:		/sys/.../iio:deviceX/bufferY/in_voltage_i_index
-What:		/sys/.../iio:deviceX/bufferY/in_voltage_q_index
 What:		/sys/.../iio:deviceX/bufferY/in_accel_x_index
 What:		/sys/.../iio:deviceX/bufferY/in_accel_y_index
 What:		/sys/.../iio:deviceX/bufferY/in_accel_z_index
@@ -1692,8 +1692,6 @@ Description:
 
 What:		/sys/bus/iio/devices/iio:deviceX/in_currentY_raw
 What:		/sys/bus/iio/devices/iio:deviceX/in_currentY_supply_raw
-What:		/sys/bus/iio/devices/iio:deviceX/in_currentY_i_raw
-What:		/sys/bus/iio/devices/iio:deviceX/in_currentY_q_raw
 KernelVersion:	3.17
 Contact:	linux-iio@vger.kernel.org
 Description:
@@ -2278,6 +2276,9 @@ Description:
 		Reading returns a list with the possible filter modes. Options
 		for the attribute:
 
+		* "none" - Filter is disabled/bypassed.
+		* "sinc1" - The digital sinc1 filter. Fast 1st
+		  conversion time. Poor noise performance.
 		* "sinc3" - The digital sinc3 filter. Moderate 1st
 		  conversion time. Good noise performance.
 		* "sinc4" - Sinc 4. Excellent noise performance. Long
@@ -2293,6 +2294,8 @@ Description:
 		* "sinc3+pf2" - Sinc3 + device specific Post Filter 2.
 		* "sinc3+pf3" - Sinc3 + device specific Post Filter 3.
 		* "sinc3+pf4" - Sinc3 + device specific Post Filter 4.
+		* "sinc5+pf1" - Sinc5 + device specific Post Filter 1.
+		* "sinc5+avg" - Sinc5 + averaging by 4.
 		* "wideband" - filter with wideband low ripple passband
 		  and sharp transition band.
 

Documentation/ABI/testing/sysfs-bus-iio-frequency-admv1013

@@ -1,10 +1,10 @@
-What:		/sys/bus/iio/devices/iio:deviceX/in_altvoltage0-1_i_calibphase
+What:		/sys/bus/iio/devices/iio:deviceX/in_altvoltage0-altvoltage1_i_calibphase
 KernelVersion:
 Contact:	linux-iio@vger.kernel.org
 Description:
 		Read/write unscaled value for the Local Oscillatior path quadrature I phase shift.
 
-What:		/sys/bus/iio/devices/iio:deviceX/in_altvoltage0-1_q_calibphase
+What:		/sys/bus/iio/devices/iio:deviceX/in_altvoltage0-altvoltage1_q_calibphase
 KernelVersion:
 Contact:	linux-iio@vger.kernel.org
 Description:

Documentation/devicetree/bindings/iio/adc/adi,ad4080.yaml

@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2025 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad4080.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD4080 20-Bit, 40 MSPS, Differential SAR ADC
+
+maintainers:
+  - Antoniu Miclaus <antoniu.miclaus@analog.com>
+
+description: |
+  The AD4080 is a high speed, low noise, low distortion, 20-bit, Easy Drive,
+  successive approximation register (SAR) analog-to-digital converter (ADC).
+  Maintaining high performance (signal-to-noise and distortion (SINAD) ratio
+  > 90 dBFS) at signal frequencies in excess of 1 MHz enables the AD4080 to
+  service a wide variety of precision, wide bandwidth data acquisition
+  applications.
+
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ad4080.pdf
+
+$ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    enum:
+      - adi,ad4080
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    description: Configuration of the SPI bus.
+    maximum: 50000000
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: cnv
+
+  vdd33-supply: true
+
+  vdd11-supply: true
+
+  vddldo-supply: true
+
+  iovdd-supply: true
+
+  vrefin-supply: true
+
+  io-backends:
+    maxItems: 1
+
+  adi,lvds-cnv-enable:
+    description: Enable the LVDS signal type on the CNV pin. Default is CMOS.
+    type: boolean
+
+  adi,num-lanes:
+    description:
+      Number of lanes on which the data is sent on the output (DA, DB pins).
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2]
+    default: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - vdd33-supply
+  - vrefin-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+          compatible = "adi,ad4080";
+          reg = <0>;
+          spi-max-frequency = <10000000>;
+          vdd33-supply = <&vdd33>;
+          vddldo-supply = <&vddldo>;
+          vrefin-supply = <&vrefin>;
+          clocks = <&cnv>;
+          clock-names = "cnv";
+          io-backends = <&iio_backend>;
+        };
+    };
+...