riscv: dts: sophgo: add ethernet GMAC device for sg2042

Add ethernet GMAC device node for the sg2042.

Tested-by: Han Gao <rabenda.cn@gmail.com>
Link: https://lore.kernel.org/r/20250708064627.509363-1-inochiama@gmail.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>

Author: inochisa

arch/riscv/boot/dts/sophgo/sg2042.dtsi

@@ -569,6 +569,67 @@
 			status = "disabled";
 		};
 
+		gmac0: ethernet@7040026000 {
+			compatible = "sophgo,sg2042-dwmac", "snps,dwmac-5.00a";
+			reg = <0x70 0x40026000 0x0 0x4000>;
+			clocks = <&clkgen GATE_CLK_AXI_ETH0>,
+				 <&clkgen GATE_CLK_PTP_REF_I_ETH0>,
+				 <&clkgen GATE_CLK_TX_ETH0>;
+			clock-names = "stmmaceth", "ptp_ref", "tx";
+			dma-noncoherent;
+			interrupt-parent = <&intc>;
+			interrupts = <132 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			resets = <&rstgen RST_ETH0>;
+			reset-names = "stmmaceth";
+			snps,multicast-filter-bins = <0>;
+			snps,perfect-filter-entries = <1>;
+			snps,aal;
+			snps,tso;
+			snps,txpbl = <32>;
+			snps,rxpbl = <32>;
+			snps,mtl-rx-config = <&gmac0_mtl_rx_setup>;
+			snps,mtl-tx-config = <&gmac0_mtl_tx_setup>;
+			snps,axi-config = <&gmac0_stmmac_axi_setup>;
+			status = "disabled";
+
+			mdio {
+				compatible = "snps,dwmac-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			gmac0_mtl_rx_setup: rx-queues-config {
+				snps,rx-queues-to-use = <8>;
+				queue0 {};
+				queue1 {};
+				queue2 {};
+				queue3 {};
+				queue4 {};
+				queue5 {};
+				queue6 {};
+				queue7 {};
+			};
+
+			gmac0_mtl_tx_setup: tx-queues-config {
+				snps,tx-queues-to-use = <8>;
+				queue0 {};
+				queue1 {};
+				queue2 {};
+				queue3 {};
+				queue4 {};
+				queue5 {};
+				queue6 {};
+				queue7 {};
+			};
+
+			gmac0_stmmac_axi_setup: stmmac-axi-config {
+				snps,blen = <16 8 4 0 0 0 0>;
+				snps,wr_osr_lmt = <1>;
+				snps,rd_osr_lmt = <2>;
+			};
+		};
+
 		emmc: mmc@704002a000 {
 			compatible = "sophgo,sg2042-dwcmshc";
 			reg = <0x70 0x4002a000 0x0 0x1000>;