Merge tag 'drm-misc-next-2023-12-14' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for $kernel-version:

UAPI Changes:

Cross-subsystem Changes:
 - A few fixes for usb/typec

Core Changes:
 - ci: Updates to the defconfig, igt version, etc.
 - writeback: Move the atomic_check helper from the encoder to connector

Driver Changes:
 - rockchip: Add support for rk3588
 - xe: Update the TODO list
 - panel:
   - nv3052c: Register documentation, init sequence improvements and
     support for the Fascontek FS035VG158
   - st7701: Add support for the Anbernic RG-ARC
   - new driver: Synaptics R63353 panel controller, Ilitek ILI9805 panel
     controller
   - new panel: AUO G156HAN04.0

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/aqpn5miejmkks7pbcfex7b6u63uwsruywxsnr3x5ljs45qatin@nbkkej2elk46

Author: airlied

Documentation/devicetree/bindings/display/panel/fascontek,fs035vg158.yaml

@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/fascontek,fs035vg158.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Fascontek FS035VG158 3.5" (640x480 pixels) 24-bit IPS LCD panel
+
+maintainers:
+  - John Watts <contact@jookia.org>
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    const: fascontek,fs035vg158
+
+  spi-3wire: true
+
+required:
+  - compatible
+  - reg
+  - port
+  - power-supply
+  - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "fascontek,fs035vg158";
+            reg = <0>;
+
+            spi-3wire;
+            spi-max-frequency = <3125000>;
+
+            reset-gpios = <&gpe 2 GPIO_ACTIVE_LOW>;
+
+            backlight = <&backlight>;
+            power-supply = <&vcc>;
+
+            port {
+                panel_input: endpoint {
+                    remote-endpoint = <&panel_output>;
+                };
+            };
+        };
+    };

Documentation/devicetree/bindings/display/panel/ilitek,ili9805.yaml

@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/ilitek,ili9805.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ilitek ILI9805 based MIPI-DSI panels
+
+maintainers:
+  - Michael Trimarchi <michael@amarulasolutions.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - giantplus,gpm1790a0
+          - tianma,tm041xdhg01
+      - const: ilitek,ili9805
+
+  avdd-supply: true
+  dvdd-supply: true
+  reg: true
+
+required:
+  - compatible
+  - avdd-supply
+  - dvdd-supply
+  - reg
+  - reset-gpios
+  - port
+  - backlight
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "giantplus,gpm1790a0", "ilitek,ili9805";
+            reg = <0>;
+            avdd-supply = <&avdd_display>;
+            dvdd-supply = <&dvdd_display>;
+            reset-gpios = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL05 */
+            backlight = <&backlight>;
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&mipi_dsi_out>;
+                };
+            };
+        };
+    };
+
+...

Documentation/devicetree/bindings/display/panel/leadtek,ltk035c5444t.yaml

@@ -18,16 +18,12 @@ properties:
   compatible:
     const: leadtek,ltk035c5444t
 
-  backlight: true
-  port: true
-  power-supply: true
-  reg: true
-  reset-gpios: true
-
   spi-3wire: true
 
 required:
   - compatible
+  - reg
+  - port
   - power-supply
   - reset-gpios
 

Documentation/devicetree/bindings/display/panel/panel-simple-lvds-dual-ports.yaml

@@ -33,6 +33,8 @@ properties:
 
         # AU Optronics Corporation 13.3" FHD (1920x1080) TFT LCD panel
       - auo,g133han01
+        # AU Optronics Corporation 15.6" FHD (1920x1080) TFT LCD panel
+      - auo,g156han04
         # AU Optronics Corporation 18.5" FHD (1920x1080) TFT LCD panel
       - auo,g185han01
         # AU Optronics Corporation 19.0" (1280x1024) TFT LCD panel

Documentation/devicetree/bindings/display/panel/sitronix,st7701.yaml

@@ -27,6 +27,7 @@ properties:
   compatible:
     items:
       - enum:
+          - anbernic,rg-arc-panel
           - densitron,dmt028vghmcmi-1a
           - elida,kd50t048a
           - techstar,ts8550b

Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml

@@ -8,8 +8,8 @@ title: Rockchip SoC display controller (VOP2)
 
 description:
   VOP2 (Video Output Processor v2) is the display controller for the Rockchip
-  series of SoCs which transfers the image data from a video memory
-  buffer to an external LCD interface.
+  series of SoCs which transfers the image data from a video memory buffer to
+  an external LCD interface.
 
 maintainers:
   - Sandy Huang <hjc@rock-chips.com>
@@ -20,15 +20,16 @@ properties:
     enum:
       - rockchip,rk3566-vop
       - rockchip,rk3568-vop
+      - rockchip,rk3588-vop
 
   reg:
     items:
       - description:
           Must contain one entry corresponding to the base address and length
           of the register space.
       - description:
-          Can optionally contain a second entry corresponding to
-          the CRTC gamma LUT address.
+          Can optionally contain a second entry corresponding to the CRTC gamma
+          LUT address.
 
   reg-names:
     items:
@@ -41,45 +42,63 @@ properties:
       The VOP interrupt is shared by several interrupt sources, such as
       frame start (VSYNC), line flag and other status interrupts.
 
+  # See compatible-specific constraints below.
   clocks:
+    minItems: 5
     items:
-      - description: Clock for ddr buffer transfer.
-      - description: Clock for the ahb bus to R/W the phy regs.
+      - description: Clock for ddr buffer transfer via axi.
+      - description: Clock for the ahb bus to R/W the regs.
       - description: Pixel clock for video port 0.
       - description: Pixel clock for video port 1.
       - description: Pixel clock for video port 2.
+      - description: Pixel clock for video port 3.
+      - description: Peripheral(vop grf/dsi) clock.
 
   clock-names:
+    minItems: 5
     items:
       - const: aclk
       - const: hclk
       - const: dclk_vp0
       - const: dclk_vp1
       - const: dclk_vp2
+      - const: dclk_vp3
+      - const: pclk_vop
 
   rockchip,grf:
     $ref: /schemas/types.yaml#/definitions/phandle
     description:
-      Phandle to GRF regs used for misc control
+      Phandle to GRF regs used for control the polarity of dclk/hsync/vsync of DPI,
+      also used for query vop memory bisr enable status, etc.
+
+  rockchip,vo1-grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to VO GRF regs used for control the polarity of dclk/hsync/vsync of hdmi
+      on rk3588.
+
+  rockchip,vop-grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to VOP GRF regs used for control data path between vopr and hdmi/edp.
+
+  rockchip,pmu:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to PMU GRF used for query vop memory bisr status on rk3588.
 
   ports:
     $ref: /schemas/graph.yaml#/properties/ports
 
-    properties:
-      port@0:
+    patternProperties:
+      "^port@[0-3]$":
         $ref: /schemas/graph.yaml#/properties/port
-        description:
-          Output endpoint of VP0
+        description: Output endpoint of VP0/1/2/3.
 
-      port@1:
-        $ref: /schemas/graph.yaml#/properties/port
-        description:
-          Output endpoint of VP1
+    required:
+      - port@0
 
-      port@2:
-        $ref: /schemas/graph.yaml#/properties/port
-        description:
-          Output endpoint of VP2
+    unevaluatedProperties: false
 
   iommus:
     maxItems: 1
@@ -96,6 +115,49 @@ required:
   - clock-names
   - ports
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3588-vop
+    then:
+      properties:
+        clocks:
+          minItems: 7
+        clock-names:
+          minItems: 7
+
+        ports:
+          required:
+            - port@0
+            - port@1
+            - port@2
+            - port@3
+
+      required:
+        - rockchip,grf
+        - rockchip,vo1-grf
+        - rockchip,vop-grf
+        - rockchip,pmu
+
+    else:
+      properties:
+        rockchip,vo1-grf: false
+        rockchip,vop-grf: false
+        rockchip,pmu: false
+
+        clocks:
+          maxItems: 5
+        clock-names:
+          maxItems: 5
+
+        ports:
+          required:
+            - port@0
+            - port@1
+            - port@2
+
 additionalProperties: false
 
 examples:

Documentation/devicetree/bindings/vendor-prefixes.yaml

@@ -474,6 +474,8 @@ patternProperties:
     description: Fairphone B.V.
   "^faraday,.*":
     description: Faraday Technology Corporation
+  "^fascontek,.*":
+    description: Fascontek
   "^fastrax,.*":
     description: Fastrax Oy
   "^fcs,.*":

Documentation/gpu/automated_testing.rst

@@ -69,14 +69,15 @@ the result. They will still be run.
 
 Each new flake entry must be associated with a link to the email reporting the
 bug to the author of the affected driver, the board name or Device Tree name of
-the board, the first kernel version affected, and an approximation of the
-failure rate.
+the board, the first kernel version affected, the IGT version used for tests,
+and an approximation of the failure rate.
 
 They should be provided under the following format::
 
   # Bug Report: $LORE_OR_PATCHWORK_URL
   # Board Name: broken-board.dtb
-  # Version: 6.6-rc1
+  # Linux Version: 6.6-rc1
+  # IGT Version: 1.28-gd2af13d9f
   # Failure Rate: 100
   flaky-test