arm64: dts: qcom: sm8650: add iris DT node

Add DT entries for the sm8650 iris decoder.

Since the firmware is required to be signed, only enable
on Qualcomm development boards where the firmware is
available.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250613-topic-sm8x50-upstream-iris-8650-dt-v4-1-35ea7952f2d2@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

Author: superna9999

arch/arm64/boot/dts/qcom/sm8650-hdk.dts

@@ -894,6 +894,10 @@
 	status = "okay";
 };
 
+&iris {
+	status = "okay";
+};
+
 &gpu {
 	status = "okay";
 

arch/arm64/boot/dts/qcom/sm8650-mtp.dts

@@ -585,6 +585,10 @@
 	};
 };
 
+&iris {
+	status = "okay";
+};
+
 &lpass_tlmm {
 	spkr_1_sd_n_active: spkr-1-sd-n-active-state {
 		pins = "gpio21";

arch/arm64/boot/dts/qcom/sm8650-qrd.dts

@@ -824,6 +824,10 @@
 	status = "okay";
 };
 
+&iris {
+	status = "okay";
+};
+
 &gpu {
 	status = "okay";
 

arch/arm64/boot/dts/qcom/sm8650.dtsi

@@ -4962,6 +4962,99 @@
 			};
 		};
 
+		iris: video-codec@aa00000 {
+			compatible = "qcom,sm8650-iris";
+			reg = <0 0x0aa00000 0 0xf0000>;
+
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH 0>;
+
+			power-domains = <&videocc VIDEO_CC_MVS0C_GDSC>,
+					<&videocc VIDEO_CC_MVS0_GDSC>,
+					<&rpmhpd RPMHPD_MXC>,
+					<&rpmhpd RPMHPD_MMCX>;
+			power-domain-names = "venus",
+					     "vcodec0",
+					     "mxc",
+					     "mmcx";
+
+			operating-points-v2 = <&iris_opp_table>;
+
+			clocks = <&gcc GCC_VIDEO_AXI0_CLK>,
+				 <&videocc VIDEO_CC_MVS0C_CLK>,
+				 <&videocc VIDEO_CC_MVS0_CLK>;
+			clock-names = "iface",
+				      "core",
+				      "vcodec0_core";
+
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_VENUS_CFG QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&mmss_noc MASTER_VIDEO QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "cpu-cfg",
+					     "video-mem";
+
+			memory-region = <&video_mem>;
+
+			resets = <&gcc GCC_VIDEO_AXI0_CLK_ARES>,
+				 <&videocc VIDEO_CC_XO_CLK_ARES>,
+				 <&videocc VIDEO_CC_MVS0C_CLK_ARES>;
+			reset-names = "bus",
+				      "xo",
+				      "core";
+
+			iommus = <&apps_smmu 0x1940 0>,
+				 <&apps_smmu 0x1947 0>;
+
+			dma-coherent;
+
+			/*
+			 * IRIS firmware is signed by vendors, only
+			 * enable in boards where the proper signed firmware
+			 * is available.
+			 */
+			status = "disabled";
+
+			iris_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-196000000 {
+					opp-hz = /bits/ 64 <196000000>;
+					required-opps = <&rpmhpd_opp_low_svs_d1>,
+							<&rpmhpd_opp_low_svs_d1>;
+				};
+
+				opp-300000000 {
+					opp-hz = /bits/ 64 <300000000>;
+					required-opps = <&rpmhpd_opp_low_svs>,
+							<&rpmhpd_opp_low_svs>;
+				};
+
+				opp-380000000 {
+					opp-hz = /bits/ 64 <380000000>;
+					required-opps = <&rpmhpd_opp_svs>,
+							<&rpmhpd_opp_svs>;
+				};
+
+				opp-435000000 {
+					opp-hz = /bits/ 64 <435000000>;
+					required-opps = <&rpmhpd_opp_svs_l1>,
+							<&rpmhpd_opp_svs_l1>;
+				};
+
+				opp-480000000 {
+					opp-hz = /bits/ 64 <480000000>;
+					required-opps = <&rpmhpd_opp_nom>,
+							<&rpmhpd_opp_nom>;
+				};
+
+				opp-533333334 {
+					opp-hz = /bits/ 64 <533333334>;
+					required-opps = <&rpmhpd_opp_turbo>,
+							<&rpmhpd_opp_turbo>;
+				};
+			};
+		};
+
 		videocc: clock-controller@aaf0000 {
 			compatible = "qcom,sm8650-videocc";
 			reg = <0 0x0aaf0000 0 0x10000>;