Merge tag 'hwmon-for-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon updates from Guenter Roeck:
 "New drivers:
   - pmbus: Support for MPS Multi-phase mp2856/mp2857 controller
   - pmbus: Support for MPS Multi-phase mp5990
   - Driver for Gigabyte AORUS Waterforce AIO coolers

  Added support to existing drivers:
   - lm75: Support for AMS AS6200 temperature sensor
   - k10temp: Support for AMD Family 19h Model 8h
   - max31827: Support for max31828 and max31829
   - sht3x: Support for sts3x
   - Add support for WMI SMM interface, and various related improvements.
    Add support for Optiplex 7000
   - emc1403: Support for EMC1442
   - npcm750-pwm-fan: Support for NPCM8xx
   - nct6775: Add support for 2 additional fan controls

  Minor improvements and bug fixes:
   - gigabyte_waterforce: Mark status report as received under a spinlock
   - aquacomputer_d5next: Remove unneeded CONFIG_DEBUG_FS #ifdef
   - gpio-fan: Convert txt bindings to yaml
   - smsc47m1: Various cleanups / improvements
   - corsair-cpro: use NULL instead of 0
   - hp-wmi-sensors: Fix failure to load on EliteDesk 800 G6
   - tmp513: Various cleanups
   - peci/dimmtemp: Bump timeout
   - pc87360: Bounds check data->innr usage
   - nct6775: Fix fan speed set failure in automatic mode
   - ABI: sysfs-class-hwmon: document various missing attributes
   - lm25066, max6650, nct6775: Use i2c_get_match_data()
   - aspeed-pwm-tacho: Fix -Wstringop-overflow warning"

* tag 'hwmon-for-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (59 commits)
  hwmon: (gigabyte_waterforce) Mark status report as received under a spinlock
  hwmon: (lm75) Fix tmp112 default config
  hwmon: (lm75) Add AMS AS6200 temperature sensor
  dt-bindings: hwmon: (lm75) Add AMS AS6200 temperature sensor
  hwmon: (lm75) remove now-unused include
  hwmon: (pmbus) Add support for MPS Multi-phase mp2856/mp2857 controller
  dt-bindings: Add MP2856/MP2857 voltage regulator device
  hwmon: (aquacomputer_d5next) Remove unneeded CONFIG_DEBUG_FS #ifdef
  dt-bindings: hwmon: gpio-fan: Convert txt bindings to yaml
  hwmon: (k10temp) Add support for AMD Family 19h Model 8h
  hwmon: Add driver for Gigabyte AORUS Waterforce AIO coolers
  hwmon: (smsc47m1) Rename global platform device variable
  hwmon: (smsc47m1) Simplify device registration
  hwmon: (smsc47m1) Convert to platform remove callback returning void
  hwmon: (smsc47m1) Mark driver struct with __refdata to prevent section mismatch
  MAINTAINERS: Add maintainer for Baikal-T1 PVT hwmon driver
  hwmon: (sht3x) add sts3x support
  hwmon: (pmbus) Add ltc4286 driver
  dt-bindings: hwmon: Add lltc ltc4286 driver bindings
  hwmon: (max31827) Add custom attribute for resolution
  ...

Author: torvalds

Documentation/ABI/testing/sysfs-class-hwmon

@@ -381,6 +381,15 @@ Description:
 
 		RW
 
+What:		/sys/class/hwmon/hwmonX/tempY_max_alarm
+Description:
+		Maximum temperature alarm flag.
+
+		- 0: OK
+		- 1: temperature has reached tempY_max
+
+		RO
+
 What:		/sys/class/hwmon/hwmonX/tempY_min
 Description:
 		Temperature min value.
@@ -389,6 +398,15 @@ Description:
 
 		RW
 
+What:		/sys/class/hwmon/hwmonX/tempY_min_alarm
+Description:
+		Minimum temperature alarm flag.
+
+		- 0: OK
+		- 1: temperature has reached tempY_min
+
+		RO
+
 What:		/sys/class/hwmon/hwmonX/tempY_max_hyst
 Description:
 		Temperature hysteresis value for max limit.
@@ -434,12 +452,7 @@ Description:
 		- 0: OK
 		- 1: temperature has reached tempY_crit
 
-		RW
-
-		Contrary to regular alarm flags which clear themselves
-		automatically when read, this one sticks until cleared by
-		the user. This is done by writing 0 to the file. Writing
-		other values is unsupported.
+		RO
 
 What:		/sys/class/hwmon/hwmonX/tempY_crit_hyst
 Description:
@@ -462,6 +475,15 @@ Description:
 
 		RW
 
+What:		/sys/class/hwmon/hwmonX/tempY_emergency_alarm
+Description:
+		Emergency high temperature alarm flag.
+
+		- 0: OK
+		- 1: temperature has reached tempY_emergency
+
+		RO
+
 What:		/sys/class/hwmon/hwmonX/tempY_emergency_hyst
 Description:
 		Temperature hysteresis value for emergency limit.
@@ -887,15 +909,15 @@ Description:
 
 		RW
 
-What:		/sys/class/hwmon/hwmonX/humidityY_input
+What:		/sys/class/hwmon/hwmonX/humidityY_alarm
 Description:
-		Humidity
+		Humidity limit detection
 
-		Unit: milli-percent (per cent mille, pcm)
+		- 0: OK
+		- 1: Humidity limit has been reached
 
 		RO
 
-
 What:		/sys/class/hwmon/hwmonX/humidityY_enable
 Description:
 		Enable or disable the sensors
@@ -908,6 +930,74 @@ Description:
 
 		RW
 
+What:		/sys/class/hwmon/hwmonX/humidityY_fault
+Description:
+		Reports a humidity sensor failure.
+
+		- 1: Failed
+		- 0: Ok
+
+		RO
+
+What:		/sys/class/hwmon/hwmonX/humidityY_input
+Description:
+		Humidity
+
+		Unit: milli-percent (per cent mille, pcm)
+
+		RO
+
+What:		/sys/class/hwmon/hwmonX/humidityY_label
+Description:
+		Suggested humidity channel label.
+
+		Text string
+
+		Should only be created if the driver has hints about what
+		this humidity channel is being used for, and user-space
+		doesn't. In all other cases, the label is provided by
+		user-space.
+
+		RO
+
+What:		/sys/class/hwmon/hwmonX/humidityY_max
+Description:
+		Humidity max value.
+
+		Unit: milli-percent (per cent mille, pcm)
+
+		RW
+
+What:		/sys/class/hwmon/hwmonX/humidityY_max_hyst
+Description:
+		Humidity hysteresis value for max limit.
+
+		Unit: milli-percent (per cent mille, pcm)
+
+		Must be reported as an absolute humidity, NOT a delta
+		from the max value.
+
+		RW
+
+What:		/sys/class/hwmon/hwmonX/humidityY_min
+Description:
+		Humidity min value.
+
+		Unit: milli-percent (per cent mille, pcm)
+
+		RW
+
+What:		/sys/class/hwmon/hwmonX/humidityY_min_hyst
+Description:
+		Humidity hysteresis value for min limit.
+
+		Unit: milli-percent (per cent mille, pcm)
+
+		Must be reported as an absolute humidity, NOT a delta
+		from the min value.
+
+		RW
+
 What:		/sys/class/hwmon/hwmonX/humidityY_rated_min
 Description:
 		Minimum rated humidity.

Documentation/devicetree/bindings/hwmon/gpio-fan.txt

@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/gpio-fan.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Fan connected to GPIO lines
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+properties:
+  compatible:
+    const: gpio-fan
+
+  gpios:
+    description: |
+      Specifies the pins that map to bits in the control value,
+      ordered MSB-->LSB.
+    minItems: 1
+    maxItems: 7
+
+  alarm-gpios:
+    maxItems: 1
+
+  gpio-fan,speed-map:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    minItems: 2
+    maxItems: 127
+    items:
+      items:
+        - description: fan speed in RPMs
+        - description: control value
+    description: |
+      A mapping of possible fan RPM speeds and the
+      control value that should be set to achieve them. This array
+      must have the RPM values in ascending order.
+
+  '#cooling-cells':
+    const: 2
+
+required:
+  - compatible
+  - gpios
+  - gpio-fan,speed-map
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio-fan {
+      compatible = "gpio-fan";
+      gpios = <&gpio2 14 1
+               &gpio2 13 1>;
+      gpio-fan,speed-map = <   0 0>,
+                           <3000 1>,
+                           <6000 2>;
+      alarm-gpios = <&gpio2 15 1>;
+      #cooling-cells = <2>; /* min followed by max */
+    };

Documentation/devicetree/bindings/hwmon/gpio-fan.yaml

@@ -19,7 +19,7 @@ properties:
 
   io-channels:
     minItems: 1
-    maxItems: 8 # Should be enough
+    maxItems: 51 # Should be enough
     description: >
       List of phandles to ADC channels to read the monitoring values
 

Documentation/devicetree/bindings/hwmon/iio-hwmon.yaml

@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/lltc,ltc4286.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LTC4286 power monitors
+
+maintainers:
+  - Delphine CC Chiu <Delphine_CC_Chiu@Wiwynn.com>
+
+properties:
+  compatible:
+    enum:
+      - lltc,ltc4286
+      - lltc,ltc4287
+
+  reg:
+    maxItems: 1
+
+  adi,vrange-low-enable:
+    description:
+      This property is a bool parameter to represent the
+      voltage range is 25.6 volts or 102.4 volts for this chip.
+      The default is 102.4 volts.
+    type: boolean
+
+  shunt-resistor-micro-ohms:
+    description:
+      Resistor value micro-ohms.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        power-monitor@40 {
+            compatible = "lltc,ltc4286";
+            reg = <0x40>;
+            adi,vrange-low-enable;
+            shunt-resistor-micro-ohms = <300>;
+        };
+    };

Documentation/devicetree/bindings/hwmon/lltc,ltc4286.yaml

@@ -14,6 +14,7 @@ properties:
   compatible:
     enum:
       - adi,adt75
+      - ams,as6200
       - atmel,at30ts74
       - dallas,ds1775
       - dallas,ds75
@@ -48,10 +49,28 @@ properties:
   vs-supply:
     description: phandle to the regulator that provides the +VS supply
 
+  interrupts:
+    maxItems: 1
+
 required:
   - compatible
   - reg
 
+allOf:
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - ams,as6200
+                - ti,tmp100
+                - ti,tmp101
+                - ti,tmp112
+    then:
+      properties:
+        interrupts: false
+
 additionalProperties: false
 
 examples:
@@ -66,3 +85,17 @@ examples:
         vs-supply = <&vs>;
       };
     };
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      temperature-sensor@48 {
+        compatible = "ams,as6200";
+        reg = <0x48>;
+        vs-supply = <&vs>;
+        interrupt-parent = <&gpio1>;
+        interrupts = <17 IRQ_TYPE_EDGE_BOTH>;
+      };
+    };

Documentation/devicetree/bindings/hwmon/lm75.yaml

@@ -117,6 +117,10 @@ properties:
           - fsl,mpl3115
             # MPR121: Proximity Capacitive Touch Sensor Controller
           - fsl,mpr121
+            # Monolithic Power Systems Inc. multi-phase controller mp2856
+          - mps,mp2856
+            # Monolithic Power Systems Inc. multi-phase controller mp2857
+          - mps,mp2857
             # Monolithic Power Systems Inc. multi-phase controller mp2888
           - mps,mp2888
             # Monolithic Power Systems Inc. multi-phase controller mp2971
@@ -125,6 +129,8 @@ properties:
           - mps,mp2973
             # Monolithic Power Systems Inc. multi-phase controller mp2975
           - mps,mp2975
+            # Monolithic Power Systems Inc. multi-phase hot-swap controller mp5990
+          - mps,mp5990
             # Honeywell Humidicon HIH-6130 humidity/temperature sensor
           - honeywell,hi6130
             # IBM Common Form Factor Power Supply Versions (all versions)