Merge tag 'drm-msm-next-2024-07-04' of https://gitlab.freedesktop.org/drm/msm into drm-next

Updates for v6.11

Core:
- SM7150 support

DPU:
- SM7150 support
- Fix DSC support for DSI panels in video mode
- Fixed TE vsync source support for DSI command-mode panels
- Fix for devices without UBWC in the display controller (ie.
  QCM2290)

DSI:
- Remove unused register-writing wrappers
- Fix DSC support for panels in video mode
- Add support for parsing TE vsync source
- Add support for MSM8937 (28nm DSI PHY)

MDP5:
- Add support for MSM8937
- Fix configuration for MSM8953

GPU:
- Split giant device table into per-gen "hw catalog" similar to
  what is done on the display side of the driver
- Fix a702 UBWC mode
- Fix unused variably warnings
- GPU memory traces
- Add param for userspace to know if raytracing is supported
- Memory barrier cleanup and GBIF unhalt fix
- X185 support (aka gpu in X1 laptop chips)
- a505 support
- fixes

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvZQpYEHpSCgXGJ2kaHJDK6QFAFfTsfiWm4b2zZOnjXGw@mail.gmail.com

Author: danvet

Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml

@@ -32,6 +32,7 @@ properties:
               - qcom,sm6125-dsi-ctrl
               - qcom,sm6350-dsi-ctrl
               - qcom,sm6375-dsi-ctrl
+              - qcom,sm7150-dsi-ctrl
               - qcom,sm8150-dsi-ctrl
               - qcom,sm8250-dsi-ctrl
               - qcom,sm8350-dsi-ctrl
@@ -162,6 +163,22 @@ properties:
                 items:
                   enum: [ 0, 1, 2, 3 ]
 
+              qcom,te-source:
+                $ref: /schemas/types.yaml#/definitions/string
+                description:
+                  Specifies the source of vsync signal from the panel used for
+                  tearing elimination.
+                default: mdp_vsync_p
+                enum:
+                  - mdp_vsync_p
+                  - mdp_vsync_s
+                  - mdp_vsync_e
+                  - timer0
+                  - timer1
+                  - timer2
+                  - timer3
+                  - timer4
+
     required:
       - port@0
       - port@1
@@ -332,6 +349,7 @@ allOf:
             enum:
               - qcom,sc7180-dsi-ctrl
               - qcom,sc7280-dsi-ctrl
+              - qcom,sm7150-dsi-ctrl
               - qcom,sm8150-dsi-ctrl
               - qcom,sm8250-dsi-ctrl
               - qcom,sm8350-dsi-ctrl
@@ -452,6 +470,7 @@ examples:
                           dsi0_out: endpoint {
                                    remote-endpoint = <&sn65dsi86_in>;
                                    data-lanes = <0 1 2 3>;
+                                   qcom,te-source = "mdp_vsync_e";
                           };
                   };
            };

Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml

@@ -16,6 +16,7 @@ properties:
   compatible:
     enum:
       - qcom,dsi-phy-28nm-8226
+      - qcom,dsi-phy-28nm-8937
       - qcom,dsi-phy-28nm-8960
       - qcom,dsi-phy-28nm-hpm
       - qcom,dsi-phy-28nm-hpm-fam-b

Documentation/devicetree/bindings/display/msm/gmu.yaml

@@ -23,6 +23,9 @@ properties:
       - items:
           - pattern: '^qcom,adreno-gmu-[67][0-9][0-9]\.[0-9]$'
           - const: qcom,adreno-gmu
+      - items:
+          - pattern: '^qcom,adreno-gmu-x[1-9][0-9][0-9]\.[0-9]$'
+          - const: qcom,adreno-gmu
       - const: qcom,adreno-gmu-wrapper
 
   reg:
@@ -225,6 +228,7 @@ allOf:
               - qcom,adreno-gmu-730.1
               - qcom,adreno-gmu-740.1
               - qcom,adreno-gmu-750.1
+              - qcom,adreno-gmu-x185.1
     then:
       properties:
         reg:

Documentation/devicetree/bindings/display/msm/gpu.yaml

@@ -10,14 +10,26 @@ title: Adreno or Snapdragon GPUs
 maintainers:
   - Rob Clark <robdclark@gmail.com>
 
+# dtschema does not select nodes based on pattern+const, so add custom select
+# as a work-around:
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - qcom,adreno
+          - amd,imageon
+  required:
+    - compatible
+
 properties:
   compatible:
     oneOf:
       - description: |
           The driver is parsing the compat string for Adreno to
           figure out the chip-id.
         items:
-          - pattern: '^qcom,adreno-[0-9a-f][0-9a-f][0-9a-f][0-9a-f][0-9a-f][0-9a-f][0-9a-f][0-9a-f]$'
+          - pattern: '^qcom,adreno-[0-9a-f]{8}$'
           - const: qcom,adreno
       - description: |
           The driver is parsing the compat string for Adreno to
@@ -32,17 +44,24 @@ properties:
           - pattern: '^amd,imageon-200\.[0-1]$'
           - const: amd,imageon
 
-  clocks: true
+  clocks:
+    minItems: 2
+    maxItems: 7
 
-  clock-names: true
+  clock-names:
+    minItems: 2
+    maxItems: 7
 
   reg:
     minItems: 1
     maxItems: 3
 
   reg-names:
     minItems: 1
-    maxItems: 3
+    items:
+      - const: kgsl_3d0_reg_memory
+      - const: cx_mem
+      - const: cx_dbgc
 
   interrupts:
     maxItems: 1

Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml

@@ -25,6 +25,7 @@ properties:
               - qcom,msm8226-mdp5
               - qcom,msm8916-mdp5
               - qcom,msm8917-mdp5
+              - qcom,msm8937-mdp5
               - qcom,msm8953-mdp5
               - qcom,msm8974-mdp5
               - qcom,msm8976-mdp5

Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml

@@ -126,6 +126,7 @@ patternProperties:
           - qcom,dsi-phy-14nm-8953
           - qcom,dsi-phy-20nm
           - qcom,dsi-phy-28nm-8226
+          - qcom,dsi-phy-28nm-8937
           - qcom,dsi-phy-28nm-hpm
           - qcom,dsi-phy-28nm-hpm-fam-b
           - qcom,dsi-phy-28nm-lp

Documentation/devicetree/bindings/display/msm/qcom,sm7150-dpu.yaml

@@ -0,0 +1,143 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm7150-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM7150 Display Processing Unit (DPU)
+
+maintainers:
+  - Danila Tikhonov <danila@jiaxyga.com>
+
+$ref: /schemas/display/msm/dpu-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm7150-dpu
+
+  reg:
+    items:
+      - description: Address offset and size for mdp register set
+      - description: Address offset and size for vbif register set
+
+  reg-names:
+    items:
+      - const: mdp
+      - const: vbif
+
+  clocks:
+    items:
+      - description: Display hf axi clock
+      - description: Display ahb clock
+      - description: Display rotator clock
+      - description: Display lut clock
+      - description: Display core clock
+      - description: Display vsync clock
+
+  clock-names:
+    items:
+      - const: bus
+      - const: iface
+      - const: rot
+      - const: lut
+      - const: core
+      - const: vsync
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
+
+    display-controller@ae01000 {
+        compatible = "qcom,sm7150-dpu";
+        reg = <0x0ae01000 0x8f000>,
+              <0x0aeb0000 0x2008>;
+        reg-names = "mdp", "vbif";
+
+        clocks = <&gcc_disp_hf_axi_clk>,
+                 <&dispcc_mdss_ahb_clk>,
+                 <&dispcc_mdss_rot_clk>,
+                 <&dispcc_mdss_mdp_lut_clk>,
+                 <&dispcc_mdss_mdp_clk>,
+                 <&dispcc_mdss_vsync_clk>;
+        clock-names = "bus",
+                      "iface",
+                      "rot",
+                      "lut",
+                      "core",
+                      "vsync";
+
+        assigned-clocks = <&dispcc_mdss_vsync_clk>;
+        assigned-clock-rates = <19200000>;
+
+        operating-points-v2 = <&mdp_opp_table>;
+        power-domains = <&rpmhpd RPMHPD_CX>;
+
+        interrupt-parent = <&mdss>;
+        interrupts = <0>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                dpu_intf1_out: endpoint {
+                    remote-endpoint = <&mdss_dsi0_in>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                dpu_intf2_out: endpoint {
+                    remote-endpoint = <&mdss_dsi1_in>;
+                };
+            };
+
+            port@2 {
+                reg = <2>;
+                dpu_intf0_out: endpoint {
+                    remote-endpoint = <&dp_in>;
+                };
+            };
+        };
+
+        mdp_opp_table: opp-table {
+            compatible = "operating-points-v2";
+
+            opp-19200000 {
+                opp-hz = /bits/ 64 <19200000>;
+                required-opps = <&rpmhpd_opp_min_svs>;
+            };
+
+            opp-200000000 {
+                opp-hz = /bits/ 64 <200000000>;
+                required-opps = <&rpmhpd_opp_low_svs>;
+            };
+
+            opp-300000000 {
+                opp-hz = /bits/ 64 <300000000>;
+                required-opps = <&rpmhpd_opp_svs>;
+            };
+
+            opp-344000000 {
+                opp-hz = /bits/ 64 <344000000>;
+                required-opps = <&rpmhpd_opp_svs_l1>;
+            };
+
+            opp-430000000 {
+                opp-hz = /bits/ 64 <430000000>;
+                required-opps = <&rpmhpd_opp_nom>;
+            };
+        };
+    };
+...