|
| 1 | +// SPDX-License-Identifier: GPL-2.0-only |
| 2 | +// |
| 3 | +// Generated with linux-mdss-dsi-panel-driver-generator from vendor device tree: |
| 4 | +// Copyright (c) 2013, The Linux Foundation. All rights reserved. |
| 5 | +// Copyright (c) 2024 Dzmitry Sankouski <dsankouski@gmail.com> |
| 6 | + |
| 7 | +#include <linux/delay.h> |
| 8 | +#include <linux/gpio/consumer.h> |
| 9 | +#include <linux/module.h> |
| 10 | +#include <linux/of.h> |
| 11 | +#include <linux/regulator/consumer.h> |
| 12 | + |
| 13 | +#include <drm/display/drm_dsc.h> |
| 14 | +#include <drm/display/drm_dsc_helper.h> |
| 15 | +#include <drm/drm_mipi_dsi.h> |
| 16 | +#include <drm/drm_probe_helper.h> |
| 17 | +#include <drm/drm_panel.h> |
| 18 | + |
| 19 | +struct s6e3ha8 { |
| 20 | + struct drm_panel panel; |
| 21 | + struct mipi_dsi_device *dsi; |
| 22 | + struct drm_dsc_config dsc; |
| 23 | + struct gpio_desc *reset_gpio; |
| 24 | + struct regulator_bulk_data *supplies; |
| 25 | +}; |
| 26 | + |
| 27 | +const struct regulator_bulk_data s6e3ha8_supplies[] = { |
| 28 | + { .supply = "vdd3" }, |
| 29 | + { .supply = "vci" }, |
| 30 | + { .supply = "vddr" }, |
| 31 | +}; |
| 32 | + |
| 33 | +static inline |
| 34 | +struct s6e3ha8 *to_s6e3ha8_amb577px01_wqhd(struct drm_panel *panel) |
| 35 | +{ |
| 36 | + return container_of(panel, struct s6e3ha8, panel); |
| 37 | +} |
| 38 | + |
| 39 | +#define s6e3ha8_test_key_on_lvl2(ctx) \ |
| 40 | + mipi_dsi_dcs_write_seq_multi(ctx, 0xf0, 0x5a, 0x5a) |
| 41 | +#define s6e3ha8_test_key_off_lvl2(ctx) \ |
| 42 | + mipi_dsi_dcs_write_seq_multi(ctx, 0xf0, 0xa5, 0xa5) |
| 43 | +#define s6e3ha8_test_key_on_lvl3(ctx) \ |
| 44 | + mipi_dsi_dcs_write_seq_multi(ctx, 0xfc, 0x5a, 0x5a) |
| 45 | +#define s6e3ha8_test_key_off_lvl3(ctx) \ |
| 46 | + mipi_dsi_dcs_write_seq_multi(ctx, 0xfc, 0xa5, 0xa5) |
| 47 | +#define s6e3ha8_test_key_on_lvl1(ctx) \ |
| 48 | + mipi_dsi_dcs_write_seq_multi(ctx, 0x9f, 0xa5, 0xa5) |
| 49 | +#define s6e3ha8_test_key_off_lvl1(ctx) \ |
| 50 | + mipi_dsi_dcs_write_seq_multi(ctx, 0x9f, 0x5a, 0x5a) |
| 51 | +#define s6e3ha8_afc_off(ctx) \ |
| 52 | + mipi_dsi_dcs_write_seq_multi(ctx, 0xe2, 0x00, 0x00) |
| 53 | + |
| 54 | +static void s6e3ha8_amb577px01_wqhd_reset(struct s6e3ha8 *priv) |
| 55 | +{ |
| 56 | + gpiod_set_value_cansleep(priv->reset_gpio, 1); |
| 57 | + usleep_range(5000, 6000); |
| 58 | + gpiod_set_value_cansleep(priv->reset_gpio, 0); |
| 59 | + usleep_range(5000, 6000); |
| 60 | + gpiod_set_value_cansleep(priv->reset_gpio, 1); |
| 61 | + usleep_range(5000, 6000); |
| 62 | +} |
| 63 | + |
| 64 | +static int s6e3ha8_amb577px01_wqhd_on(struct s6e3ha8 *priv) |
| 65 | +{ |
| 66 | + struct mipi_dsi_device *dsi = priv->dsi; |
| 67 | + struct mipi_dsi_multi_context ctx = { .dsi = dsi }; |
| 68 | + |
| 69 | + dsi->mode_flags |= MIPI_DSI_MODE_LPM; |
| 70 | + |
| 71 | + s6e3ha8_test_key_on_lvl1(&ctx); |
| 72 | + |
| 73 | + s6e3ha8_test_key_on_lvl2(&ctx); |
| 74 | + mipi_dsi_compression_mode_multi(&ctx, true); |
| 75 | + s6e3ha8_test_key_off_lvl2(&ctx); |
| 76 | + |
| 77 | + mipi_dsi_dcs_exit_sleep_mode_multi(&ctx); |
| 78 | + usleep_range(5000, 6000); |
| 79 | + |
| 80 | + s6e3ha8_test_key_on_lvl2(&ctx); |
| 81 | + mipi_dsi_dcs_write_seq_multi(&ctx, 0xf2, 0x13); |
| 82 | + s6e3ha8_test_key_off_lvl2(&ctx); |
| 83 | + usleep_range(10000, 11000); |
| 84 | + |
| 85 | + s6e3ha8_test_key_on_lvl2(&ctx); |
| 86 | + mipi_dsi_dcs_write_seq_multi(&ctx, 0xf2, 0x13); |
| 87 | + s6e3ha8_test_key_off_lvl2(&ctx); |
| 88 | + |
| 89 | + /* OMOK setting 1 (Initial setting) - Scaler Latch Setting Guide */ |
| 90 | + s6e3ha8_test_key_on_lvl2(&ctx); |
| 91 | + mipi_dsi_dcs_write_seq_multi(&ctx, 0xb0, 0x07); |
| 92 | + /* latch setting 1 : Scaler on/off & address setting & PPS setting -> Image update latch */ |
| 93 | + mipi_dsi_dcs_write_seq_multi(&ctx, 0xf2, 0x3c, 0x10); |
| 94 | + mipi_dsi_dcs_write_seq_multi(&ctx, 0xb0, 0x0b); |
| 95 | + /* latch setting 2 : Ratio change mode -> Image update latch */ |
| 96 | + mipi_dsi_dcs_write_seq_multi(&ctx, 0xf2, 0x30); |
| 97 | + /* OMOK setting 2 - Seamless setting guide : WQHD */ |
| 98 | + mipi_dsi_dcs_write_seq_multi(&ctx, 0x2a, 0x00, 0x00, 0x05, 0x9f); /* CASET */ |
| 99 | + mipi_dsi_dcs_write_seq_multi(&ctx, 0x2b, 0x00, 0x00, 0x0b, 0x8f); /* PASET */ |
| 100 | + mipi_dsi_dcs_write_seq_multi(&ctx, 0xba, 0x01); /* scaler setup : scaler off */ |
| 101 | + s6e3ha8_test_key_off_lvl2(&ctx); |
| 102 | + |
| 103 | + mipi_dsi_dcs_write_seq_multi(&ctx, 0x35, 0x00); /* TE Vsync ON */ |
| 104 | + |
| 105 | + s6e3ha8_test_key_on_lvl2(&ctx); |
| 106 | + mipi_dsi_dcs_write_seq_multi(&ctx, 0xed, 0x4c); /* ERR_FG */ |
| 107 | + s6e3ha8_test_key_off_lvl2(&ctx); |
| 108 | + |
| 109 | + s6e3ha8_test_key_on_lvl3(&ctx); |
| 110 | + /* FFC Setting 897.6Mbps */ |
| 111 | + mipi_dsi_dcs_write_seq_multi(&ctx, 0xc5, 0x0d, 0x10, 0xb4, 0x3e, 0x01); |
| 112 | + s6e3ha8_test_key_off_lvl3(&ctx); |
| 113 | + |
| 114 | + s6e3ha8_test_key_on_lvl2(&ctx); |
| 115 | + mipi_dsi_dcs_write_seq_multi(&ctx, 0xb9, |
| 116 | + 0x00, 0xb0, 0x81, 0x09, 0x00, 0x00, 0x00, |
| 117 | + 0x11, 0x03); /* TSP HSYNC Setting */ |
| 118 | + s6e3ha8_test_key_off_lvl2(&ctx); |
| 119 | + |
| 120 | + s6e3ha8_test_key_on_lvl2(&ctx); |
| 121 | + mipi_dsi_dcs_write_seq_multi(&ctx, 0xb0, 0x03); |
| 122 | + mipi_dsi_dcs_write_seq_multi(&ctx, 0xf6, 0x43); |
| 123 | + s6e3ha8_test_key_off_lvl2(&ctx); |
| 124 | + |
| 125 | + s6e3ha8_test_key_on_lvl2(&ctx); |
| 126 | + /* Brightness condition set */ |
| 127 | + mipi_dsi_dcs_write_seq_multi(&ctx, 0xca, |
| 128 | + 0x07, 0x00, 0x00, 0x00, 0x80, 0x80, 0x80, |
| 129 | + 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, |
| 130 | + 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, |
| 131 | + 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, |
| 132 | + 0x80, 0x80, 0x80, 0x00, 0x00, 0x00); |
| 133 | + mipi_dsi_dcs_write_seq_multi(&ctx, 0xb1, 0x00, 0x0c); /* AID Set : 0% */ |
| 134 | + mipi_dsi_dcs_write_seq_multi(&ctx, 0xb5, |
| 135 | + 0x19, 0xdc, 0x16, 0x01, 0x34, 0x67, 0x9a, |
| 136 | + 0xcd, 0x01, 0x22, 0x33, 0x44, 0x00, 0x00, |
| 137 | + 0x05, 0x55, 0xcc, 0x0c, 0x01, 0x11, 0x11, |
| 138 | + 0x10); /* MPS/ELVSS Setting */ |
| 139 | + mipi_dsi_dcs_write_seq_multi(&ctx, 0xf4, 0xeb, 0x28); /* VINT */ |
| 140 | + mipi_dsi_dcs_write_seq_multi(&ctx, 0xf7, 0x03); /* Gamma, LTPS(AID) update */ |
| 141 | + s6e3ha8_test_key_off_lvl2(&ctx); |
| 142 | + |
| 143 | + s6e3ha8_test_key_off_lvl1(&ctx); |
| 144 | + |
| 145 | + return ctx.accum_err; |
| 146 | +} |
| 147 | + |
| 148 | +static int s6e3ha8_enable(struct drm_panel *panel) |
| 149 | +{ |
| 150 | + struct s6e3ha8 *priv = to_s6e3ha8_amb577px01_wqhd(panel); |
| 151 | + struct mipi_dsi_device *dsi = priv->dsi; |
| 152 | + struct mipi_dsi_multi_context ctx = { .dsi = dsi }; |
| 153 | + |
| 154 | + s6e3ha8_test_key_on_lvl1(&ctx); |
| 155 | + mipi_dsi_dcs_set_display_on_multi(&ctx); |
| 156 | + s6e3ha8_test_key_off_lvl1(&ctx); |
| 157 | + |
| 158 | + return ctx.accum_err; |
| 159 | +} |
| 160 | + |
| 161 | +static int s6e3ha8_disable(struct drm_panel *panel) |
| 162 | +{ |
| 163 | + struct s6e3ha8 *priv = to_s6e3ha8_amb577px01_wqhd(panel); |
| 164 | + struct mipi_dsi_device *dsi = priv->dsi; |
| 165 | + struct mipi_dsi_multi_context ctx = { .dsi = dsi }; |
| 166 | + |
| 167 | + s6e3ha8_test_key_on_lvl1(&ctx); |
| 168 | + mipi_dsi_dcs_set_display_off_multi(&ctx); |
| 169 | + s6e3ha8_test_key_off_lvl1(&ctx); |
| 170 | + mipi_dsi_msleep(&ctx, 20); |
| 171 | + |
| 172 | + s6e3ha8_test_key_on_lvl2(&ctx); |
| 173 | + s6e3ha8_afc_off(&ctx); |
| 174 | + s6e3ha8_test_key_off_lvl2(&ctx); |
| 175 | + |
| 176 | + mipi_dsi_msleep(&ctx, 160); |
| 177 | + |
| 178 | + return ctx.accum_err; |
| 179 | +} |
| 180 | + |
| 181 | +static int s6e3ha8_amb577px01_wqhd_prepare(struct drm_panel *panel) |
| 182 | +{ |
| 183 | + struct s6e3ha8 *priv = to_s6e3ha8_amb577px01_wqhd(panel); |
| 184 | + struct mipi_dsi_device *dsi = priv->dsi; |
| 185 | + struct mipi_dsi_multi_context ctx = { .dsi = dsi }; |
| 186 | + struct drm_dsc_picture_parameter_set pps; |
| 187 | + int ret; |
| 188 | + |
| 189 | + ret = regulator_bulk_enable(ARRAY_SIZE(s6e3ha8_supplies), priv->supplies); |
| 190 | + if (ret < 0) |
| 191 | + return ret; |
| 192 | + mipi_dsi_msleep(&ctx, 120); |
| 193 | + s6e3ha8_amb577px01_wqhd_reset(priv); |
| 194 | + |
| 195 | + ret = s6e3ha8_amb577px01_wqhd_on(priv); |
| 196 | + if (ret < 0) { |
| 197 | + gpiod_set_value_cansleep(priv->reset_gpio, 1); |
| 198 | + goto err; |
| 199 | + } |
| 200 | + |
| 201 | + drm_dsc_pps_payload_pack(&pps, &priv->dsc); |
| 202 | + |
| 203 | + s6e3ha8_test_key_on_lvl1(&ctx); |
| 204 | + mipi_dsi_picture_parameter_set_multi(&ctx, &pps); |
| 205 | + s6e3ha8_test_key_off_lvl1(&ctx); |
| 206 | + |
| 207 | + mipi_dsi_msleep(&ctx, 28); |
| 208 | + |
| 209 | + return ctx.accum_err; |
| 210 | +err: |
| 211 | + regulator_bulk_disable(ARRAY_SIZE(s6e3ha8_supplies), priv->supplies); |
| 212 | + return ret; |
| 213 | +} |
| 214 | + |
| 215 | +static int s6e3ha8_amb577px01_wqhd_unprepare(struct drm_panel *panel) |
| 216 | +{ |
| 217 | + struct s6e3ha8 *priv = to_s6e3ha8_amb577px01_wqhd(panel); |
| 218 | + |
| 219 | + return regulator_bulk_disable(ARRAY_SIZE(s6e3ha8_supplies), priv->supplies); |
| 220 | +} |
| 221 | + |
| 222 | +static const struct drm_display_mode s6e3ha8_amb577px01_wqhd_mode = { |
| 223 | + .clock = (1440 + 116 + 44 + 120) * (2960 + 120 + 80 + 124) * 60 / 1000, |
| 224 | + .hdisplay = 1440, |
| 225 | + .hsync_start = 1440 + 116, |
| 226 | + .hsync_end = 1440 + 116 + 44, |
| 227 | + .htotal = 1440 + 116 + 44 + 120, |
| 228 | + .vdisplay = 2960, |
| 229 | + .vsync_start = 2960 + 120, |
| 230 | + .vsync_end = 2960 + 120 + 80, |
| 231 | + .vtotal = 2960 + 120 + 80 + 124, |
| 232 | + .width_mm = 64, |
| 233 | + .height_mm = 132, |
| 234 | +}; |
| 235 | + |
| 236 | +static int s6e3ha8_amb577px01_wqhd_get_modes(struct drm_panel *panel, |
| 237 | + struct drm_connector *connector) |
| 238 | +{ |
| 239 | + return drm_connector_helper_get_modes_fixed(connector, &s6e3ha8_amb577px01_wqhd_mode); |
| 240 | +} |
| 241 | + |
| 242 | +static const struct drm_panel_funcs s6e3ha8_amb577px01_wqhd_panel_funcs = { |
| 243 | + .prepare = s6e3ha8_amb577px01_wqhd_prepare, |
| 244 | + .unprepare = s6e3ha8_amb577px01_wqhd_unprepare, |
| 245 | + .get_modes = s6e3ha8_amb577px01_wqhd_get_modes, |
| 246 | + .enable = s6e3ha8_enable, |
| 247 | + .disable = s6e3ha8_disable, |
| 248 | +}; |
| 249 | + |
| 250 | +static int s6e3ha8_amb577px01_wqhd_probe(struct mipi_dsi_device *dsi) |
| 251 | +{ |
| 252 | + struct device *dev = &dsi->dev; |
| 253 | + struct s6e3ha8 *priv; |
| 254 | + int ret; |
| 255 | + |
| 256 | + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); |
| 257 | + if (!priv) |
| 258 | + return -ENOMEM; |
| 259 | + |
| 260 | + ret = devm_regulator_bulk_get_const(dev, ARRAY_SIZE(s6e3ha8_supplies), |
| 261 | + s6e3ha8_supplies, |
| 262 | + &priv->supplies); |
| 263 | + if (ret < 0) { |
| 264 | + dev_err(dev, "failed to get regulators: %d\n", ret); |
| 265 | + return ret; |
| 266 | + } |
| 267 | + |
| 268 | + priv->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH); |
| 269 | + if (IS_ERR(priv->reset_gpio)) |
| 270 | + return dev_err_probe(dev, PTR_ERR(priv->reset_gpio), |
| 271 | + "Failed to get reset-gpios\n"); |
| 272 | + |
| 273 | + priv->dsi = dsi; |
| 274 | + mipi_dsi_set_drvdata(dsi, priv); |
| 275 | + |
| 276 | + dsi->lanes = 4; |
| 277 | + dsi->format = MIPI_DSI_FMT_RGB888; |
| 278 | + dsi->mode_flags = MIPI_DSI_CLOCK_NON_CONTINUOUS | |
| 279 | + MIPI_DSI_MODE_VIDEO_NO_HFP | MIPI_DSI_MODE_VIDEO_NO_HBP | |
| 280 | + MIPI_DSI_MODE_VIDEO_NO_HSA | MIPI_DSI_MODE_NO_EOT_PACKET; |
| 281 | + |
| 282 | + drm_panel_init(&priv->panel, dev, &s6e3ha8_amb577px01_wqhd_panel_funcs, |
| 283 | + DRM_MODE_CONNECTOR_DSI); |
| 284 | + priv->panel.prepare_prev_first = true; |
| 285 | + |
| 286 | + drm_panel_add(&priv->panel); |
| 287 | + |
| 288 | + /* This panel only supports DSC; unconditionally enable it */ |
| 289 | + dsi->dsc = &priv->dsc; |
| 290 | + |
| 291 | + priv->dsc.dsc_version_major = 1; |
| 292 | + priv->dsc.dsc_version_minor = 1; |
| 293 | + |
| 294 | + priv->dsc.slice_height = 40; |
| 295 | + priv->dsc.slice_width = 720; |
| 296 | + WARN_ON(1440 % priv->dsc.slice_width); |
| 297 | + priv->dsc.slice_count = 1440 / priv->dsc.slice_width; |
| 298 | + priv->dsc.bits_per_component = 8; |
| 299 | + priv->dsc.bits_per_pixel = 8 << 4; /* 4 fractional bits */ |
| 300 | + priv->dsc.block_pred_enable = true; |
| 301 | + |
| 302 | + ret = mipi_dsi_attach(dsi); |
| 303 | + if (ret < 0) { |
| 304 | + dev_err(dev, "Failed to attach to DSI host: %d\n", ret); |
| 305 | + drm_panel_remove(&priv->panel); |
| 306 | + return ret; |
| 307 | + } |
| 308 | + |
| 309 | + return 0; |
| 310 | +} |
| 311 | + |
| 312 | +static void s6e3ha8_amb577px01_wqhd_remove(struct mipi_dsi_device *dsi) |
| 313 | +{ |
| 314 | + struct s6e3ha8 *priv = mipi_dsi_get_drvdata(dsi); |
| 315 | + int ret; |
| 316 | + |
| 317 | + ret = mipi_dsi_detach(dsi); |
| 318 | + if (ret < 0) |
| 319 | + dev_err(&dsi->dev, "Failed to detach from DSI host: %d\n", ret); |
| 320 | + |
| 321 | + drm_panel_remove(&priv->panel); |
| 322 | +} |
| 323 | + |
| 324 | +static const struct of_device_id s6e3ha8_amb577px01_wqhd_of_match[] = { |
| 325 | + { .compatible = "samsung,s6e3ha8" }, |
| 326 | + { /* sentinel */ } |
| 327 | +}; |
| 328 | +MODULE_DEVICE_TABLE(of, s6e3ha8_amb577px01_wqhd_of_match); |
| 329 | + |
| 330 | +static struct mipi_dsi_driver s6e3ha8_amb577px01_wqhd_driver = { |
| 331 | + .probe = s6e3ha8_amb577px01_wqhd_probe, |
| 332 | + .remove = s6e3ha8_amb577px01_wqhd_remove, |
| 333 | + .driver = { |
| 334 | + .name = "panel-s6e3ha8", |
| 335 | + .of_match_table = s6e3ha8_amb577px01_wqhd_of_match, |
| 336 | + }, |
| 337 | +}; |
| 338 | +module_mipi_dsi_driver(s6e3ha8_amb577px01_wqhd_driver); |
| 339 | + |
| 340 | +MODULE_AUTHOR("Dzmitry Sankouski <dsankouski@gmail.com>"); |
| 341 | +MODULE_DESCRIPTION("DRM driver for S6E3HA8 panel"); |
| 342 | +MODULE_LICENSE("GPL"); |
0 commit comments