riscv: dts: sophgo: add reset configuration for Sophgo CV1800 series SoC

Add known reset configuration for existed device.

Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lore.kernel.org/r/20250617070144.1149926-5-inochiama@gmail.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>

Author: inochisa

arch/riscv/boot/dts/sophgo/cv180x.dtsi

@@ -36,6 +36,7 @@
 			reg = <0x3020000 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			resets = <&rst RST_GPIO0>;
 
 			porta: gpio-controller@0 {
 				compatible = "snps,dw-apb-gpio-port";
@@ -54,6 +55,7 @@
 			reg = <0x3021000 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			resets = <&rst RST_GPIO1>;
 
 			portb: gpio-controller@0 {
 				compatible = "snps,dw-apb-gpio-port";
@@ -72,6 +74,7 @@
 			reg = <0x3022000 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			resets = <&rst RST_GPIO2>;
 
 			portc: gpio-controller@0 {
 				compatible = "snps,dw-apb-gpio-port";
@@ -90,6 +93,7 @@
 			reg = <0x3023000 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			resets = <&rst RST_GPIO3>;
 
 			portd: gpio-controller@0 {
 				compatible = "snps,dw-apb-gpio-port";
@@ -133,6 +137,7 @@
 			clocks = <&clk CLK_I2C>, <&clk CLK_APB_I2C0>;
 			clock-names = "ref", "pclk";
 			interrupts = <SOC_PERIPHERAL_IRQ(33) IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rst RST_I2C0>;
 			status = "disabled";
 		};
 
@@ -144,6 +149,7 @@
 			clocks = <&clk CLK_I2C>, <&clk CLK_APB_I2C1>;
 			clock-names = "ref", "pclk";
 			interrupts = <SOC_PERIPHERAL_IRQ(34) IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rst RST_I2C1>;
 			status = "disabled";
 		};
 
@@ -155,6 +161,7 @@
 			clocks = <&clk CLK_I2C>, <&clk CLK_APB_I2C2>;
 			clock-names = "ref", "pclk";
 			interrupts = <SOC_PERIPHERAL_IRQ(35) IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rst RST_I2C2>;
 			status = "disabled";
 		};
 
@@ -166,6 +173,7 @@
 			clocks = <&clk CLK_I2C>, <&clk CLK_APB_I2C3>;
 			clock-names = "ref", "pclk";
 			interrupts = <SOC_PERIPHERAL_IRQ(36) IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rst RST_I2C3>;
 			status = "disabled";
 		};
 
@@ -177,6 +185,7 @@
 			clocks = <&clk CLK_I2C>, <&clk CLK_APB_I2C4>;
 			clock-names = "ref", "pclk";
 			interrupts = <SOC_PERIPHERAL_IRQ(37) IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rst RST_I2C4>;
 			status = "disabled";
 		};
 
@@ -188,6 +197,7 @@
 			clock-names = "baudclk", "apb_pclk";
 			reg-shift = <2>;
 			reg-io-width = <4>;
+			resets = <&rst RST_UART0>;
 			status = "disabled";
 		};
 
@@ -199,6 +209,7 @@
 			clock-names = "baudclk", "apb_pclk";
 			reg-shift = <2>;
 			reg-io-width = <4>;
+			resets = <&rst RST_UART1>;
 			status = "disabled";
 		};
 
@@ -210,6 +221,7 @@
 			clock-names = "baudclk", "apb_pclk";
 			reg-shift = <2>;
 			reg-io-width = <4>;
+			resets = <&rst RST_UART2>;
 			status = "disabled";
 		};
 
@@ -221,6 +233,7 @@
 			clock-names = "baudclk", "apb_pclk";
 			reg-shift = <2>;
 			reg-io-width = <4>;
+			resets = <&rst RST_UART3>;
 			status = "disabled";
 		};
 
@@ -232,6 +245,7 @@
 			clocks = <&clk CLK_SPI>, <&clk CLK_APB_SPI0>;
 			clock-names = "ssi_clk", "pclk";
 			interrupts = <SOC_PERIPHERAL_IRQ(38) IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rst RST_SPI0>;
 			status = "disabled";
 		};
 
@@ -243,6 +257,7 @@
 			clocks = <&clk CLK_SPI>, <&clk CLK_APB_SPI1>;
 			clock-names = "ssi_clk", "pclk";
 			interrupts = <SOC_PERIPHERAL_IRQ(39) IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rst RST_SPI1>;
 			status = "disabled";
 		};
 
@@ -254,6 +269,7 @@
 			clocks = <&clk CLK_SPI>, <&clk CLK_APB_SPI2>;
 			clock-names = "ssi_clk", "pclk";
 			interrupts = <SOC_PERIPHERAL_IRQ(40) IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rst RST_SPI2>;
 			status = "disabled";
 		};
 
@@ -265,6 +281,7 @@
 			clocks = <&clk CLK_SPI>, <&clk CLK_APB_SPI3>;
 			clock-names = "ssi_clk", "pclk";
 			interrupts = <SOC_PERIPHERAL_IRQ(41) IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rst RST_SPI3>;
 			status = "disabled";
 		};
 
@@ -276,6 +293,7 @@
 			clock-names = "baudclk", "apb_pclk";
 			reg-shift = <2>;
 			reg-io-width = <4>;
+			resets = <&rst RST_UART4>;
 			status = "disabled";
 		};