dmaengine: loongson2-apb: Rename the prefix ls2x to loongson2

Since commit e06c432 ("dmaengine: Loongson1: Add Loongson-1 APB DMA
driver"), the Loongson-1 dma controller was added.

Unfortunately their naming has not been standardized, as CPUs belonging
to the same Loongson family, we expect to standardize the naming for
ease of understanding.

Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Link: https://lore.kernel.org/r/20240924064241.2414629-1-zhoubinbin@loongson.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>

Author: AaronDot

MAINTAINERS

@@ -13369,12 +13369,12 @@ S:	Maintained
 F:	Documentation/devicetree/bindings/gpio/loongson,ls-gpio.yaml
 F:	drivers/gpio/gpio-loongson-64bit.c
 
-LOONGSON LS2X APB DMA DRIVER
+LOONGSON-2 APB DMA DRIVER
 M:	Binbin Zhou <zhoubinbin@loongson.cn>
 L:	dmaengine@vger.kernel.org
 S:	Maintained
 F:	Documentation/devicetree/bindings/dma/loongson,ls2x-apbdma.yaml
-F:	drivers/dma/ls2x-apb-dma.c
+F:	drivers/dma/loongson2-apb-dma.c
 
 LOONGSON LS2X I2C DRIVER
 M:	Binbin Zhou <zhoubinbin@loongson.cn>

arch/loongarch/configs/loongson3_defconfig

@@ -775,7 +775,7 @@ CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_EFI=y
 CONFIG_RTC_DRV_LOONGSON=y
 CONFIG_DMADEVICES=y
-CONFIG_LS2X_APB_DMA=y
+CONFIG_LOONGSON2_APB_DMA=y
 CONFIG_UDMABUF=y
 CONFIG_DMABUF_HEAPS=y
 CONFIG_DMABUF_HEAPS_SYSTEM=y

drivers/dma/Kconfig

@@ -378,6 +378,20 @@ config LOONGSON1_APB_DMA
 	  This selects support for the APB DMA controller in Loongson1 SoCs,
 	  which is required by Loongson1 NAND and audio support.
 
+config LOONGSON2_APB_DMA
+	tristate "Loongson2 APB DMA support"
+	depends on LOONGARCH || COMPILE_TEST
+	select DMA_ENGINE
+	select DMA_VIRTUAL_CHANNELS
+	help
+	  Support for the Loongson2 APB DMA controller driver. The
+	  DMA controller is having single DMA channel which can be
+	  configured for different peripherals like audio, nand, sdio
+	  etc which is in APB bus.
+
+	  This DMA controller transfers data from memory to peripheral fifo.
+	  It does not support memory to memory data transfer.
+
 config LPC18XX_DMAMUX
 	bool "NXP LPC18xx/43xx DMA MUX for PL080"
 	depends on ARCH_LPC18XX || COMPILE_TEST
@@ -396,20 +410,6 @@ config LPC32XX_DMAMUX
 	  Support for PL080 multiplexed DMA request lines on
 	  LPC32XX platrofm.
 
-config LS2X_APB_DMA
-	tristate "Loongson LS2X APB DMA support"
-	depends on LOONGARCH || COMPILE_TEST
-	select DMA_ENGINE
-	select DMA_VIRTUAL_CHANNELS
-	help
-	  Support for the Loongson LS2X APB DMA controller driver. The
-	  DMA controller is having single DMA channel which can be
-	  configured for different peripherals like audio, nand, sdio
-	  etc which is in APB bus.
-
-	  This DMA controller transfers data from memory to peripheral fifo.
-	  It does not support memory to memory data transfer.
-
 config MCF_EDMA
 	tristate "Freescale eDMA engine support, ColdFire mcf5441x SoCs"
 	depends on M5441x || (COMPILE_TEST && FSL_EDMA=n)

drivers/dma/Makefile

@@ -50,9 +50,9 @@ obj-$(CONFIG_INTEL_IOATDMA) += ioat/
 obj-y += idxd/
 obj-$(CONFIG_K3_DMA) += k3dma.o
 obj-$(CONFIG_LOONGSON1_APB_DMA) += loongson1-apb-dma.o
+obj-$(CONFIG_LOONGSON2_APB_DMA) += loongson2-apb-dma.o
 obj-$(CONFIG_LPC18XX_DMAMUX) += lpc18xx-dmamux.o
 obj-$(CONFIG_LPC32XX_DMAMUX) += lpc32xx-dmamux.o
-obj-$(CONFIG_LS2X_APB_DMA) += ls2x-apb-dma.o
 obj-$(CONFIG_MILBEAUT_HDMAC) += milbeaut-hdmac.o
 obj-$(CONFIG_MILBEAUT_XDMAC) += milbeaut-xdmac.o
 obj-$(CONFIG_MMP_PDMA) += mmp_pdma.o

drivers/dma/ls2x-apb-dma.c drivers/dma/loongson2-apb-dma.cdrivers/dma/ls2x-apb-dma.c renamed to drivers/dma/loongson2-apb-dma.c

@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-or-later
 /*
- * Driver for the Loongson LS2X APB DMA Controller
+ * Driver for the Loongson-2 APB DMA Controller
  *
  * Copyright (C) 2017-2023 Loongson Corporation
  */
@@ -700,6 +700,6 @@ static struct platform_driver ls2x_dmac_driver = {
 };
 module_platform_driver(ls2x_dmac_driver);
 
-MODULE_DESCRIPTION("Loongson LS2X APB DMA Controller driver");
+MODULE_DESCRIPTION("Loongson-2 APB DMA Controller driver");
 MODULE_AUTHOR("Loongson Technology Corporation Limited");
 MODULE_LICENSE("GPL");