powerpc/pseries: Fix scv instruction crash with kexec

commit 21a741e upstream.

kexec on pseries disables AIL (reloc_on_exc), required for scv
instruction support, before other CPUs have been shut down. This means
they can execute scv instructions after AIL is disabled, which causes an
interrupt at an unexpected entry location that crashes the kernel.

Change the kexec sequence to disable AIL after other CPUs have been
brought down.

As a refresher, the real-mode scv interrupt vector is 0x17000, and the
fixed-location head code probably couldn't easily deal with implementing
such high addresses so it was just decided not to support that interrupt
at all.

Fixes: 7fa95f9 ("powerpc/64s: system call support for scv/rfscv instructions")
Cc: stable@vger.kernel.org # v5.9+
Reported-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Closes: https://lore.kernel.org/3b4b2943-49ad-4619-b195-bc416f1d1409@linux.ibm.com
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Tested-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Link: https://msgid.link/20240625134047.298759-1-npiggin@gmail.com
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Author: npiggin

arch/powerpc/kexec/core_64.c

@@ -26,6 +26,7 @@
 #include <asm/paca.h>
 #include <asm/mmu.h>
 #include <asm/sections.h>	/* _end */
+#include <asm/setup.h>
 #include <asm/smp.h>
 #include <asm/hw_breakpoint.h>
 #include <asm/svm.h>
@@ -315,6 +316,16 @@ void default_machine_kexec(struct kimage *image)
 	if (!kdump_in_progress())
 		kexec_prepare_cpus();
 
+#ifdef CONFIG_PPC_PSERIES
+	/*
+	 * This must be done after other CPUs have shut down, otherwise they
+	 * could execute the 'scv' instruction, which is not supported with
+	 * reloc disabled (see configure_exceptions()).
+	 */
+	if (firmware_has_feature(FW_FEATURE_SET_MODE))
+		pseries_disable_reloc_on_exc();
+#endif
+
 	printk("kexec: Starting switchover sequence.\n");
 
 	/* switch to a staticly allocated stack.  Based on irq stack code.

arch/powerpc/platforms/pseries/kexec.c

@@ -61,11 +61,3 @@ void pseries_kexec_cpu_down(int crash_shutdown, int secondary)
 	} else
 		xics_kexec_teardown_cpu(secondary);
 }
-
-void pseries_machine_kexec(struct kimage *image)
-{
-	if (firmware_has_feature(FW_FEATURE_SET_MODE))
-		pseries_disable_reloc_on_exc();
-
-	default_machine_kexec(image);
-}

arch/powerpc/platforms/pseries/pseries.h

@@ -38,7 +38,6 @@ static inline void smp_init_pseries(void) { }
 #endif
 
 extern void pseries_kexec_cpu_down(int crash_shutdown, int secondary);
-void pseries_machine_kexec(struct kimage *image);
 
 extern void pSeries_final_fixup(void);
 

arch/powerpc/platforms/pseries/setup.c

@@ -1159,7 +1159,6 @@ define_machine(pseries) {
 	.machine_check_exception = pSeries_machine_check_exception,
 	.machine_check_log_err	= pSeries_machine_check_log_err,
 #ifdef CONFIG_KEXEC_CORE
-	.machine_kexec          = pseries_machine_kexec,
 	.kexec_cpu_down         = pseries_kexec_cpu_down,
 #endif
 #ifdef CONFIG_MEMORY_HOTPLUG