phy: move phy-qcom-snps-eusb2 out of its vendor sub-directory

As not only Qualcomm, but also Samsung is using the Synopsys eUSB2 IP
(albeit with a different register layout) in their newer SoCs, move the
driver out of its vendor sub-directory and rename it to phy-snps-eusb2.

Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250504144527.1723980-4-ivo.ivanov.ivanov1@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

Author: ivoszbg

drivers/phy/Kconfig

@@ -43,6 +43,14 @@ config PHY_PISTACHIO_USB
 	help
 	  Enable this to support the USB2.0 PHY on the IMG Pistachio SoC.
 
+config PHY_SNPS_EUSB2
+	tristate "SNPS eUSB2 PHY Driver"
+	depends on OF && (ARCH_QCOM || COMPILE_TEST)
+	select GENERIC_PHY
+	help
+	  Enable support for the USB high-speed SNPS eUSB2 phy on select
+	  SoCs. The PHY is usually paired with a Synopsys DWC3 USB controller.
+
 config PHY_XGENE
 	tristate "APM X-Gene 15Gbps PHY support"
 	depends on HAS_IOMEM && OF && (ARCH_XGENE || COMPILE_TEST)

drivers/phy/Makefile

@@ -9,6 +9,7 @@ obj-$(CONFIG_PHY_CAN_TRANSCEIVER)	+= phy-can-transceiver.o
 obj-$(CONFIG_PHY_LPC18XX_USB_OTG)	+= phy-lpc18xx-usb-otg.o
 obj-$(CONFIG_PHY_XGENE)			+= phy-xgene.o
 obj-$(CONFIG_PHY_PISTACHIO_USB)		+= phy-pistachio-usb.o
+obj-$(CONFIG_PHY_SNPS_EUSB2)		+= phy-snps-eusb2.o
 obj-$(CONFIG_USB_LGM_PHY)		+= phy-lgm-usb.o
 obj-$(CONFIG_PHY_AIROHA_PCIE)		+= phy-airoha-pcie.o
 obj-$(CONFIG_PHY_NXP_PTN3222)		+= phy-nxp-ptn3222.o

…ivers/phy/qualcomm/phy-qcom-snps-eusb2.c drivers/phy/phy-snps-eusb2.cdrivers/phy/qualcomm/phy-qcom-snps-eusb2.c renamed to drivers/phy/phy-snps-eusb2.c drivers/phy/qualcomm/phy-qcom-snps-eusb2.c renamed to drivers/phy/phy-snps-eusb2.c

@@ -125,15 +125,6 @@ config PHY_QCOM_QUSB2
 	  PHY which is usually paired with either the ChipIdea or Synopsys DWC3
 	  USB IPs on MSM SOCs.
 
-config PHY_QCOM_SNPS_EUSB2
-	tristate "Qualcomm SNPS eUSB2 PHY Driver"
-	depends on OF && (ARCH_QCOM || COMPILE_TEST)
-	select GENERIC_PHY
-	help
-	  Enable support for the USB high-speed SNPS eUSB2 phy on Qualcomm
-	  chipsets. The PHY is paired with a Synopsys DWC3 USB controller
-	  on Qualcomm SOCs.
-
 config PHY_QCOM_EUSB2_REPEATER
 	tristate "Qualcomm SNPS eUSB2 Repeater Driver"
 	depends on OF && (ARCH_QCOM || COMPILE_TEST)

drivers/phy/qualcomm/Kconfig

@@ -15,7 +15,6 @@ obj-$(CONFIG_PHY_QCOM_QMP_USB)		+= phy-qcom-qmp-usb.o
 obj-$(CONFIG_PHY_QCOM_QMP_USB_LEGACY)	+= phy-qcom-qmp-usb-legacy.o
 
 obj-$(CONFIG_PHY_QCOM_QUSB2)		+= phy-qcom-qusb2.o
-obj-$(CONFIG_PHY_QCOM_SNPS_EUSB2)	+= phy-qcom-snps-eusb2.o
 obj-$(CONFIG_PHY_QCOM_EUSB2_REPEATER)	+= phy-qcom-eusb2-repeater.o
 obj-$(CONFIG_PHY_QCOM_UNIPHY_PCIE_28LP)	+= phy-qcom-uniphy-pcie-28lp.o
 obj-$(CONFIG_PHY_QCOM_USB_HS) 		+= phy-qcom-usb-hs.o