clk: sunxi-ng: d1: Add missing divider for MMC mod clocks

The D1/R528/T113 SoCs have a hidden divider of 2 in the MMC mod clocks,
just as other recent SoCs. So far we did not describe that, which led
to the resulting MMC clock rate to be only half of its intended value.

Use a macro that allows to describe a fixed post-divider, to compensate
for that divisor.

This brings the MMC performance on those SoCs to its expected level,
so about 23 MB/s for SD cards, instead of the 11 MB/s measured so far.

Fixes: 35b97bb ("clk: sunxi-ng: Add support for the D1 SoC clocks")
Reported-by: Kuba Szczodrzyński <kuba@szczodrzynski.pl>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Link: https://patch.msgid.link/20250501120631.837186-1-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>

Author: Andre-ARM

drivers/clk/sunxi-ng/ccu-sun20i-d1.c

@@ -412,19 +412,23 @@ static const struct clk_parent_data mmc0_mmc1_parents[] = {
 	{ .hw = &pll_periph0_2x_clk.common.hw },
 	{ .hw = &pll_audio1_div2_clk.common.hw },
 };
-static SUNXI_CCU_MP_DATA_WITH_MUX_GATE(mmc0_clk, "mmc0", mmc0_mmc1_parents, 0x830,
-				       0, 4,	/* M */
-				       8, 2,	/* P */
-				       24, 3,	/* mux */
-				       BIT(31),	/* gate */
-				       0);
-
-static SUNXI_CCU_MP_DATA_WITH_MUX_GATE(mmc1_clk, "mmc1", mmc0_mmc1_parents, 0x834,
-				       0, 4,	/* M */
-				       8, 2,	/* P */
-				       24, 3,	/* mux */
-				       BIT(31),	/* gate */
-				       0);
+static SUNXI_CCU_MP_DATA_WITH_MUX_GATE_POSTDIV(mmc0_clk, "mmc0",
+					       mmc0_mmc1_parents, 0x830,
+					       0, 4,		/* M */
+					       8, 2,		/* P */
+					       24, 3,		/* mux */
+					       BIT(31),		/* gate */
+					       2,		/* post-div */
+					       0);
+
+static SUNXI_CCU_MP_DATA_WITH_MUX_GATE_POSTDIV(mmc1_clk, "mmc1",
+					       mmc0_mmc1_parents, 0x834,
+					       0, 4,		/* M */
+					       8, 2,		/* P */
+					       24, 3,		/* mux */
+					       BIT(31),		/* gate */
+					       2,		/* post-div */
+					       0);
 
 static const struct clk_parent_data mmc2_parents[] = {
 	{ .fw_name = "hosc" },
@@ -433,12 +437,14 @@ static const struct clk_parent_data mmc2_parents[] = {
 	{ .hw = &pll_periph0_800M_clk.common.hw },
 	{ .hw = &pll_audio1_div2_clk.common.hw },
 };
-static SUNXI_CCU_MP_DATA_WITH_MUX_GATE(mmc2_clk, "mmc2", mmc2_parents, 0x838,
-				       0, 4,	/* M */
-				       8, 2,	/* P */
-				       24, 3,	/* mux */
-				       BIT(31),	/* gate */
-				       0);
+static SUNXI_CCU_MP_DATA_WITH_MUX_GATE_POSTDIV(mmc2_clk, "mmc2", mmc2_parents,
+					       0x838,
+					       0, 4,		/* M */
+					       8, 2,		/* P */
+					       24, 3,		/* mux */
+					       BIT(31),		/* gate */
+					       2,		/* post-div */
+					       0);
 
 static SUNXI_CCU_GATE_HWS(bus_mmc0_clk, "bus-mmc0", psi_ahb_hws,
 			  0x84c, BIT(0), 0);

drivers/clk/sunxi-ng/ccu_mp.h

@@ -52,6 +52,28 @@ struct ccu_mp {
 		}							\
 	}
 
+#define SUNXI_CCU_MP_DATA_WITH_MUX_GATE_POSTDIV(_struct, _name, _parents, \
+						_reg,			\
+						_mshift, _mwidth,	\
+						_pshift, _pwidth,	\
+						_muxshift, _muxwidth,	\
+						_gate, _postdiv, _flags)\
+	struct ccu_mp _struct = {					\
+		.enable	= _gate,					\
+		.m	= _SUNXI_CCU_DIV(_mshift, _mwidth),		\
+		.p	= _SUNXI_CCU_DIV(_pshift, _pwidth),		\
+		.mux	= _SUNXI_CCU_MUX(_muxshift, _muxwidth),		\
+		.fixed_post_div	= _postdiv,				\
+		.common	= {						\
+			.reg		= _reg,				\
+			.features	= CCU_FEATURE_FIXED_POSTDIV,	\
+			.hw.init	= CLK_HW_INIT_PARENTS_DATA(_name, \
+							_parents,	\
+							&ccu_mp_ops,	\
+							_flags),	\
+		}							\
+	}
+
 #define SUNXI_CCU_MP_WITH_MUX_GATE(_struct, _name, _parents, _reg,	\
 				   _mshift, _mwidth,			\
 				   _pshift, _pwidth,			\