ixgbe: initialize aci.lock before it's used

Currently aci.lock is initialized too late. A bunch of ACI callbacks
using the lock are called prior it's initialized.

Commit 337369f ("locking/mutex: Add MUTEX_WARN_ON() into fast path")
highlights that issue what results in call trace.

[    4.092899] DEBUG_LOCKS_WARN_ON(lock->magic != lock)
[    4.092910] WARNING: CPU: 0 PID: 578 at kernel/locking/mutex.c:154 mutex_lock+0x6d/0x80
[    4.098757] Call Trace:
[    4.098847]  <TASK>
[    4.098922]  ixgbe_aci_send_cmd+0x8c/0x1e0 [ixgbe]
[    4.099108]  ? hrtimer_try_to_cancel+0x18/0x110
[    4.099277]  ixgbe_aci_get_fw_ver+0x52/0xa0 [ixgbe]
[    4.099460]  ixgbe_check_fw_error+0x1fc/0x2f0 [ixgbe]
[    4.099650]  ? usleep_range_state+0x69/0xd0
[    4.099811]  ? usleep_range_state+0x8c/0xd0
[    4.099964]  ixgbe_probe+0x3b0/0x12d0 [ixgbe]
[    4.100132]  local_pci_probe+0x43/0xa0
[    4.100267]  work_for_cpu_fn+0x13/0x20
[    4.101647]  </TASK>

Move aci.lock mutex initialization to ixgbe_sw_init() before any ACI
command is sent. Along with that move also related SWFW semaphore in
order to reduce size of ixgbe_probe() and that way all locks are
initialized in ixgbe_sw_init().

Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Fixes: 4600cdf ("ixgbe: Enable link management in E610 device")
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Author: jjagielsk

drivers/net/ethernet/intel/ixgbe/ixgbe_main.c

@@ -6973,6 +6973,13 @@ static int ixgbe_sw_init(struct ixgbe_adapter *adapter,
 		break;
 	}
 
+	/* Make sure the SWFW semaphore is in a valid state */
+	if (hw->mac.ops.init_swfw_sync)
+		hw->mac.ops.init_swfw_sync(hw);
+
+	if (hw->mac.type == ixgbe_mac_e610)
+		mutex_init(&hw->aci.lock);
+
 #ifdef IXGBE_FCOE
 	/* FCoE support exists, always init the FCoE lock */
 	spin_lock_init(&adapter->fcoe.lock);
@@ -11643,10 +11650,6 @@ static int ixgbe_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (err)
 		goto err_sw_init;
 
-	/* Make sure the SWFW semaphore is in a valid state */
-	if (hw->mac.ops.init_swfw_sync)
-		hw->mac.ops.init_swfw_sync(hw);
-
 	if (ixgbe_check_fw_error(adapter))
 		return ixgbe_recovery_probe(adapter);
 
@@ -11850,8 +11853,6 @@ static int ixgbe_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	ether_addr_copy(hw->mac.addr, hw->mac.perm_addr);
 	ixgbe_mac_set_default_filter(adapter);
 
-	if (hw->mac.type == ixgbe_mac_e610)
-		mutex_init(&hw->aci.lock);
 	timer_setup(&adapter->service_timer, ixgbe_service_timer, 0);
 
 	if (ixgbe_removed(hw->hw_addr)) {
@@ -12007,9 +12008,9 @@ static int ixgbe_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	devl_unlock(adapter->devlink);
 	ixgbe_release_hw_control(adapter);
 	ixgbe_clear_interrupt_scheme(adapter);
+err_sw_init:
 	if (hw->mac.type == ixgbe_mac_e610)
 		mutex_destroy(&adapter->hw.aci.lock);
-err_sw_init:
 	ixgbe_disable_sriov(adapter);
 	adapter->flags2 &= ~IXGBE_FLAG2_SEARCH_FOR_SFP;
 	iounmap(adapter->io_addr);