Merge tag 'spi-fix-v6.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

Pull spi fixes from Mark Brown:
 "A few small driver specific fixes, the most substantial one being the
  Tegra one which fixes spurious errors with default delays for chip
  select hold times"

* tag 'spi-fix-v6.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: spi-sun4i: fix early activation
  spi: tegra114: Use value to check for invalid delays
  spi: loopback-test: Do not split 1024-byte hexdumps

Author: torvalds

drivers/spi/spi-loopback-test.c

@@ -420,7 +420,7 @@ MODULE_LICENSE("GPL");
 static void spi_test_print_hex_dump(char *pre, const void *ptr, size_t len)
 {
 	/* limit the hex_dump */
-	if (len < 1024) {
+	if (len <= 1024) {
 		print_hex_dump(KERN_INFO, pre,
 			       DUMP_PREFIX_OFFSET, 16, 1,
 			       ptr, len, 0);

drivers/spi/spi-sun4i.c

@@ -264,6 +264,9 @@ static int sun4i_spi_transfer_one(struct spi_controller *host,
 	else
 		reg |= SUN4I_CTL_DHB;
 
+	/* Now that the settings are correct, enable the interface */
+	reg |= SUN4I_CTL_ENABLE;
+
 	sun4i_spi_write(sspi, SUN4I_CTL_REG, reg);
 
 	/* Ensure that we have a parent clock fast enough */
@@ -404,7 +407,7 @@ static int sun4i_spi_runtime_resume(struct device *dev)
 	}
 
 	sun4i_spi_write(sspi, SUN4I_CTL_REG,
-			SUN4I_CTL_ENABLE | SUN4I_CTL_MASTER | SUN4I_CTL_TP);
+			SUN4I_CTL_MASTER | SUN4I_CTL_TP);
 
 	return 0;
 

drivers/spi/spi-tegra114.c

@@ -728,9 +728,9 @@ static int tegra_spi_set_hw_cs_timing(struct spi_device *spi)
 	u32 inactive_cycles;
 	u8 cs_state;
 
-	if ((setup->unit && setup->unit != SPI_DELAY_UNIT_SCK) ||
-	    (hold->unit && hold->unit != SPI_DELAY_UNIT_SCK) ||
-	    (inactive->unit && inactive->unit != SPI_DELAY_UNIT_SCK)) {
+	if ((setup->value && setup->unit != SPI_DELAY_UNIT_SCK) ||
+	    (hold->value && hold->unit != SPI_DELAY_UNIT_SCK) ||
+	    (inactive->value && inactive->unit != SPI_DELAY_UNIT_SCK)) {
 		dev_err(&spi->dev,
 			"Invalid delay unit %d, should be SPI_DELAY_UNIT_SCK\n",
 			SPI_DELAY_UNIT_SCK);