[brcmfmac] Fix regulatory domain handling to reset bands properly

Currently, we ignore the default country in the reg notifier.
We also register a custom regulatory domain, which is set
as the default.
As a result, the chip is likely to be set to the correct country,
but the regulatory domain will not match it.

When the regulatory notifier is then called, we see the countries
are the same and do not change anything, even though the domain
is wrong.

This patch forces us to reset the bands on the first country change
even if the chip is already set to that country.

We also restore the original band info before reconstructing channel
info, as the new regdom power limits may be higher than what is
currently set.

Signed-off-by: Daniel Berlin <dberlin@dberlin.org>

Author: dberlin

drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c

@@ -7295,18 +7295,34 @@ static int brcmf_construct_chaninfo(struct brcmf_cfg80211_info *cfg,
 		goto fail_pbuf;
 	}
 
+	/* Changing regulatory domain may change power limits upwards.
+	 * To ensure that we correctly set the new band info, copy the original
+	 * info first.
+	 */
 	band = wiphy->bands[NL80211_BAND_2GHZ];
-	if (band)
+	if (band) {
+		memcpy(band->channels, &__wl_2ghz_channels,
+		       sizeof(__wl_2ghz_channels));
+		band->n_channels = ARRAY_SIZE(__wl_2ghz_channels);
 		for (i = 0; i < band->n_channels; i++)
 			band->channels[i].flags = IEEE80211_CHAN_DISABLED;
+	}
 	band = wiphy->bands[NL80211_BAND_5GHZ];
-	if (band)
+	if (band) {
+		memcpy(band->channels, &__wl_5ghz_channels,
+		       sizeof(__wl_5ghz_channels));
+		band->n_channels = ARRAY_SIZE(__wl_5ghz_channels);
 		for (i = 0; i < band->n_channels; i++)
 			band->channels[i].flags = IEEE80211_CHAN_DISABLED;
+	}
 	band = wiphy->bands[NL80211_BAND_6GHZ];
-	if (band)
+	if (band) {
+		memcpy(band->channels, &__wl_6ghz_channels,
+		       sizeof(__wl_6ghz_channels));
+		band->n_channels = ARRAY_SIZE(__wl_6ghz_channels);
 		for (i = 0; i < band->n_channels; i++)
 			band->channels[i].flags = IEEE80211_CHAN_DISABLED;
+	}
 	total = le32_to_cpu(list->count);
 	if (total > BRCMF_MAX_CHANSPEC_LIST) {
 		bphy_err(drvr, "Invalid count of channel Spec. (%u)\n",
@@ -8768,9 +8784,17 @@ static void brcmf_cfg80211_reg_notifier(struct wiphy *wiphy,
 	}
 
 	err = brcmf_translate_country_code(ifp->drvr, req->alpha2, &ccreq);
-	if (err)
-		return;
-
+	if (err) {
+		/* Because we ignore the default country code above,
+		 * we will start out in our custom reg domain, but the chip
+		 * may already be set to the right country.
+		 * As such, we force the bands to be re-set the first
+		 * time we try to set a country for real.
+		 */
+		if (err != -EAGAIN || !cfg->force_band_setup)
+			return;
+	}
+	cfg->force_band_setup = false;
 	err = brcmf_fil_iovar_data_set(ifp, "country", &ccreq, sizeof(ccreq));
 	if (err) {
 		bphy_err(drvr, "Firmware rejected country setting\n");
@@ -8837,6 +8861,7 @@ struct brcmf_cfg80211_info *brcmf_cfg80211_attach(struct brcmf_pub *drvr,
 	cfg->pub = drvr;
 	init_vif_event(&cfg->vif_event);
 	INIT_LIST_HEAD(&cfg->vif_list);
+	cfg->force_band_setup = true;
 
 	vif = brcmf_alloc_vif(cfg, NL80211_IFTYPE_STATION);
 	if (IS_ERR(vif))

drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h

@@ -350,6 +350,7 @@ struct brcmf_cfg80211_wowl {
  * @dongle_up: indicate whether dongle up or not.
  * @roam_on: on/off switch for dongle self-roaming.
  * @scan_tried: indicates if first scan attempted.
+ * @force_band_setup: indicates if we should force band setup
  * @dcmd_buf: dcmd buffer.
  * @extra_buf: mainly to grab assoc information.
  * @debugfsdir: debugfs folder for this device.
@@ -380,6 +381,7 @@ struct brcmf_cfg80211_info {
 	bool pwr_save;
 	bool dongle_up;
 	bool scan_tried;
+	bool force_band_setup;
 	u8 *dcmd_buf;
 	u8 *extra_buf;
 	struct dentry *debugfsdir;