Skip to content

Commit c600d25

Browse files
jimmyhonmmind
jimmyhon
authored and
mmind
committed
arm64: dts: rockchip: Add Orange Pi 5 Max board
The RK3588 Single Board Computer includes - eMMC - microSD - UART - 2 PWM LEDs - RTC - RTL8125 network controller on PCIe 2.0x1. - M.2 M-key connector routed to PCIe 3.0x4 - PWM controlled heat sink fan. - 2 USB2 ports - lower USB3 port - upper USB3 port with OTG capability - Mali GPU - SPI NOR flash - Mask Rom button - Analog audio using es8388 codec via the headset jack and onboard mic - HDMI0 - HDMI1 the vcc5v0_usb30 regulator shares the same enable gpio pin as the vcc5v0_usb20 regulator. The Orange Pi 5 Max and Orange Pi 5 Ultra are both credit-card sized boards with similar layout, so these boards will share a common dtsi. The 5 Max has an extra HDMI0 while the 5 Ultra has a HDMI IN instead. Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com> Link: https://lore.kernel.org/r/20250109051619.1825-4-honyuenkwun@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
1 parent 6327f2d commit c600d25

4 files changed

Lines changed: 220 additions & 0 deletions

File tree

‎arch/arm64/boot/dts/rockchip/Makefile‎

Lines changed: 1 addition & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -147,6 +147,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-jaguar.dtb
147147
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-nanopc-t6.dtb
148148
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-nanopc-t6-lts.dtb
149149
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-ok3588-c.dtb
150+
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-orangepi-5-max.dtb
150151
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-orangepi-5-plus.dtb
151152
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-quartzpro64.dtb
152153
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5-itx.dtb

‎arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-compact.dtsi‎

Lines changed: 151 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,151 @@
1+
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2+
3+
/dts-v1/;
4+
5+
#include <dt-bindings/gpio/gpio.h>
6+
#include <dt-bindings/pinctrl/rockchip.h>
7+
#include "rk3588-orangepi-5.dtsi"
8+
9+
/ {
10+
model = "Xunlong Orange Pi 5 Max";
11+
compatible = "xunlong,orangepi-5-max", "rockchip,rk3588";
12+
13+
vcc5v0_usb30_otg: vcc5v0-usb30-otg-regulator {
14+
compatible = "regulator-fixed";
15+
enable-active-high;
16+
/* USB_OTG_PWREN */
17+
gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>;
18+
pinctrl-names = "default";
19+
pinctrl-0 = <&usb_otg_pwren>;
20+
regulator-name = "vcc5v0_usb30_otg";
21+
regulator-min-microvolt = <5000000>;
22+
regulator-max-microvolt = <5000000>;
23+
vin-supply = <&vcc5v0_sys>;
24+
};
25+
};
26+
27+
&headphone_amp {
28+
/* PHONE_CTL */
29+
enable-gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
30+
};
31+
32+
&analog_sound {
33+
pinctrl-names = "default";
34+
pinctrl-0 = <&hp_detect>;
35+
simple-audio-card,aux-devs = <&headphone_amp>;
36+
simple-audio-card,hp-det-gpios = <&gpio3 RK_PD2 GPIO_ACTIVE_HIGH>;
37+
38+
simple-audio-card,routing =
39+
"Headphones", "LOUT1",
40+
"Headphones", "ROUT1",
41+
"LINPUT1", "Microphone Jack",
42+
"RINPUT1", "Microphone Jack",
43+
"LINPUT2", "Onboard Microphone",
44+
"RINPUT2", "Onboard Microphone";
45+
simple-audio-card,widgets =
46+
"Microphone", "Microphone Jack",
47+
"Microphone", "Onboard Microphone",
48+
"Headphone", "Headphones";
49+
};
50+
51+
&fan {
52+
/* FAN_CTL_H */
53+
pwms = <&pwm9 0 50000 0>;
54+
};
55+
56+
&hym8563 {
57+
interrupt-parent = <&gpio0>;
58+
interrupts = <RK_PC4 IRQ_TYPE_LEVEL_LOW>;
59+
pinctrl-names = "default";
60+
pinctrl-0 = <&rtc_int_l>;
61+
};
62+
63+
&led_blue_pwm {
64+
/* PWM_LED1 */
65+
pwms = <&pwm4 0 25000 0>;
66+
status = "okay";
67+
};
68+
69+
&led_green_pwm {
70+
/* PWM_LED2 */
71+
pwms = <&pwm5 0 25000 0>;
72+
};
73+
74+
/* phy2 */
75+
&pcie2x1l1 {
76+
reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_HIGH>;
77+
vpcie3v3-supply = <&vcc3v3_pcie_eth>;
78+
status = "okay";
79+
};
80+
81+
&pinctrl {
82+
hym8563 {
83+
rtc_int_l: hym8563-int {
84+
rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
85+
};
86+
};
87+
88+
sound {
89+
hp_detect: hp-detect {
90+
rockchip,pins = <3 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
91+
};
92+
};
93+
94+
usb {
95+
usb_host_pwren: usb-host-pwren {
96+
rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
97+
};
98+
};
99+
};
100+
101+
&pwm4 {
102+
pinctrl-names = "default";
103+
pinctrl-0 = <&pwm4m0_pins>;
104+
status = "okay";
105+
};
106+
107+
&pwm5 {
108+
pinctrl-names = "default";
109+
pinctrl-0 = <&pwm5m1_pins>;
110+
status = "okay";
111+
};
112+
113+
&pwm9 {
114+
pinctrl-names = "default";
115+
pinctrl-0 = <&pwm9m2_pins>;
116+
status = "okay";
117+
};
118+
119+
&sfc {
120+
pinctrl-names = "default";
121+
pinctrl-0 = <&fspim2_pins>;
122+
};
123+
124+
&u2phy0_otg {
125+
phy-supply = <&vcc5v0_usb30_otg>;
126+
};
127+
128+
&u2phy1_otg {
129+
phy-supply = <&vcc5v0_usb20>;
130+
};
131+
132+
&usb_host0_xhci {
133+
dr_mode = "host";
134+
};
135+
136+
/* pcie eth. not a real regulator. 33VAUX */
137+
&vcc3v3_pcie_eth {
138+
/* Ethernet_power_en */
139+
gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_LOW>;
140+
};
141+
142+
/*
143+
* Represents the vcc5v0_usb20 and vcc5v0_usb30 in the schematic,
144+
* both regulators share the same enable gpio
145+
*/
146+
&vcc5v0_usb20 {
147+
/* USB_HOST_PWREN */
148+
gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>;
149+
pinctrl-names = "default";
150+
pinctrl-0 = <&usb_host_pwren>;
151+
};

‎arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-max.dts‎

Lines changed: 60 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,60 @@
1+
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2+
3+
/dts-v1/;
4+
5+
#include <dt-bindings/gpio/gpio.h>
6+
#include <dt-bindings/pinctrl/rockchip.h>
7+
#include <dt-bindings/soc/rockchip,vop2.h>
8+
#include "rk3588-orangepi-5-compact.dtsi"
9+
10+
/ {
11+
model = "Xunlong Orange Pi 5 Max";
12+
compatible = "xunlong,orangepi-5-max", "rockchip,rk3588";
13+
14+
hdmi0-con {
15+
compatible = "hdmi-connector";
16+
type = "a";
17+
18+
port {
19+
hdmi0_con_in: endpoint {
20+
remote-endpoint = <&hdmi0_out_con>;
21+
};
22+
};
23+
};
24+
};
25+
26+
&hdmi0 {
27+
status = "okay";
28+
};
29+
30+
&hdmi0_in {
31+
hdmi0_in_vp0: endpoint {
32+
remote-endpoint = <&vp0_out_hdmi0>;
33+
};
34+
};
35+
36+
&hdmi0_out {
37+
hdmi0_out_con: endpoint {
38+
remote-endpoint = <&hdmi0_con_in>;
39+
};
40+
};
41+
42+
&hdptxphy_hdmi0 {
43+
status = "okay";
44+
};
45+
46+
&pinctrl {
47+
48+
usb {
49+
usb_otg_pwren: usb-otg-pwren {
50+
rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
51+
};
52+
};
53+
};
54+
55+
&vp0 {
56+
vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
57+
reg = <ROCKCHIP_VOP2_EP_HDMI0>;
58+
remote-endpoint = <&hdmi0_in_vp0>;
59+
};
60+
};

‎arch/arm64/boot/dts/rockchip/rk3588-orangepi-5.dtsi‎

Lines changed: 8 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -83,6 +83,14 @@
8383
pwm-leds {
8484
compatible = "pwm-leds";
8585

86+
led_blue_pwm: led-1 {
87+
color = <LED_COLOR_ID_BLUE>;
88+
function = LED_FUNCTION_STATUS;
89+
linux,default-trigger = "heartbeat";
90+
max-brightness = <255>;
91+
status = "disabled";
92+
};
93+
8694
led_green_pwm: led-2 {
8795
color = <LED_COLOR_ID_GREEN>;
8896
function = LED_FUNCTION_INDICATOR;

0 commit comments

Comments
 (0)