hwmon: (ina238) Fix inconsistent whitespace

Some purely cosmetic changes in ina238.c:

 - When aligning definitions, do so consistently with tab stop of 8.
 - Use spaces instead of tabs around operators.
 - Align wrapped lines.

Signed-off-by: Jonas Rebmann <jre@pengutronix.de>
Link: https://lore.kernel.org/r/20250718-ina228-v2-1-227feb62f709@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Author: jonrebm

drivers/hwmon/ina238.c

@@ -41,7 +41,7 @@
 
 #define INA238_CONFIG_ADCRANGE		BIT(4)
 #define SQ52206_CONFIG_ADCRANGE_HIGH	BIT(4)
-#define SQ52206_CONFIG_ADCRANGE_LOW		BIT(3)
+#define SQ52206_CONFIG_ADCRANGE_LOW	BIT(3)
 
 #define INA238_DIAG_ALERT_TMPOL		BIT(7)
 #define INA238_DIAG_ALERT_SHNTOL	BIT(6)
@@ -104,7 +104,7 @@
 
 #define INA238_SHUNT_VOLTAGE_LSB	5 /* 5 uV/lsb */
 #define INA238_BUS_VOLTAGE_LSB		3125 /* 3.125 mV/lsb */
-#define INA238_DIE_TEMP_LSB			1250000 /* 125.0000 mC/lsb */
+#define INA238_DIE_TEMP_LSB		1250000 /* 125.0000 mC/lsb */
 #define SQ52206_BUS_VOLTAGE_LSB		3750 /* 3.75 mV/lsb */
 #define SQ52206_DIE_TEMP_LSB		78125 /* 7.8125 mC/lsb */
 
@@ -118,12 +118,12 @@ enum ina238_ids { ina238, ina237, sq52206 };
 
 struct ina238_config {
 	bool has_power_highest;		/* chip detection power peak */
-	bool has_energy;			/* chip detection energy */
-	u8 temp_shift;				/* fixed parameters for temp calculate */
+	bool has_energy;		/* chip detection energy */
+	u8 temp_shift;			/* fixed parameters for temp calculate */
 	u32 power_calculate_factor;	/* fixed parameters for power calculate */
-	u16 config_default;			/* Power-on default state */
+	u16 config_default;		/* Power-on default state */
 	int bus_voltage_lsb;		/* use for temperature calculate, uV/lsb */
-	int temp_lsb;				/* use for temperature calculate */
+	int temp_lsb;			/* use for temperature calculate */
 };
 
 struct ina238_data {
@@ -271,7 +271,7 @@ static int ina238_read_in(struct device *dev, u32 attr, int channel,
 		if (channel == 0)
 			/* gain of 1 -> LSB / 4 */
 			*val = (regval * INA238_SHUNT_VOLTAGE_LSB) *
-					data->gain / (1000 * 4);
+				data->gain / (1000 * 4);
 		else
 			*val = (regval * data->config->bus_voltage_lsb) / 1000;
 		break;
@@ -370,7 +370,7 @@ static int ina238_read_power(struct device *dev, u32 attr, long *val)
 			return err;
 
 		/* Fixed 1mA lsb, scaled by 1000000 to have result in uW */
-		power = div_u64(regval * 1000ULL * INA238_FIXED_SHUNT *	data->gain *
+		power = div_u64(regval * 1000ULL * INA238_FIXED_SHUNT * data->gain *
 				data->config->power_calculate_factor, 4 * 100 * data->rshunt);
 		/* Clamp value to maximum value of long */
 		*val = clamp_val(power, 0, LONG_MAX);
@@ -381,7 +381,7 @@ static int ina238_read_power(struct device *dev, u32 attr, long *val)
 			return err;
 
 		/* Fixed 1mA lsb, scaled by 1000000 to have result in uW */
-		power = div_u64(regval * 1000ULL * INA238_FIXED_SHUNT *	data->gain *
+		power = div_u64(regval * 1000ULL * INA238_FIXED_SHUNT * data->gain *
 				data->config->power_calculate_factor, 4 * 100 * data->rshunt);
 		/* Clamp value to maximum value of long */
 		*val = clamp_val(power, 0, LONG_MAX);
@@ -395,7 +395,7 @@ static int ina238_read_power(struct device *dev, u32 attr, long *val)
 		 * Truncated 24-bit compare register, lower 8-bits are
 		 * truncated. Same conversion to/from uW as POWER register.
 		 */
-		power = div_u64((regval << 8) * 1000ULL * INA238_FIXED_SHUNT *	data->gain *
+		power = div_u64((regval << 8) * 1000ULL * INA238_FIXED_SHUNT * data->gain *
 				data->config->power_calculate_factor, 4 * 100 * data->rshunt);
 		/* Clamp value to maximum value of long */
 		*val = clamp_val(power, 0, LONG_MAX);
@@ -448,15 +448,15 @@ static int ina238_read_temp(struct device *dev, u32 attr, long *val)
 			return err;
 		/* Signed, result in mC */
 		*val = div_s64(((s64)((s16)regval) >> data->config->temp_shift) *
-						(s64)data->config->temp_lsb, 10000);
+			       (s64)data->config->temp_lsb, 10000);
 		break;
 	case hwmon_temp_max:
 		err = regmap_read(data->regmap, INA238_TEMP_LIMIT, &regval);
 		if (err)
 			return err;
 		/* Signed, result in mC */
 		*val = div_s64(((s64)((s16)regval) >> data->config->temp_shift) *
-						(s64)data->config->temp_lsb, 10000);
+			       (s64)data->config->temp_lsb, 10000);
 		break;
 	case hwmon_temp_max_alarm:
 		err = regmap_read(data->regmap, INA238_DIAG_ALERT, &regval);
@@ -501,8 +501,8 @@ static ssize_t energy1_input_show(struct device *dev,
 		return ret;
 
 	/* result in uJ */
-	energy = div_u64(regval * INA238_FIXED_SHUNT *	data->gain * 16 * 10 *
-				data->config->power_calculate_factor, 4 * data->rshunt);
+	energy = div_u64(regval * INA238_FIXED_SHUNT * data->gain * 16 * 10 *
+			 data->config->power_calculate_factor, 4 * data->rshunt);
 
 	return sysfs_emit(buf, "%llu\n", energy);
 }