Expand SoundWire MBQ register map support

Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:

The current SDCA MBQ (Multi-Byte Quantities) register map only
supports 16-bit types, add support for more sizes and then update
the rt722 driver to use the new support. We also add support for
the deferring feature of MBQs to allow hardware to indicate it is
not currently ready to service a read/write.

Afraid I don't have hardware to test the rt722 change so it is
only build tested, but I thought it good to include a change to
demonstrate the new features in use.

Author: broonie

.mailmap

@@ -435,7 +435,7 @@ Martin Kepplinger <martink@posteo.de> <martin.kepplinger@ginzinger.com>
 Martin Kepplinger <martink@posteo.de> <martin.kepplinger@puri.sm>
 Martin Kepplinger <martink@posteo.de> <martin.kepplinger@theobroma-systems.com>
 Martyna Szapar-Mudlaw <martyna.szapar-mudlaw@linux.intel.com> <martyna.szapar-mudlaw@intel.com>
-Mathieu Othacehe <m.othacehe@gmail.com> <othacehe@gnu.org>
+Mathieu Othacehe <othacehe@gnu.org> <m.othacehe@gmail.com>
 Mat Martineau <martineau@kernel.org> <mathew.j.martineau@linux.intel.com>
 Mat Martineau <martineau@kernel.org> <mathewm@codeaurora.org>
 Matthew Wilcox <willy@infradead.org> <matthew.r.wilcox@intel.com>
@@ -735,6 +735,7 @@ Wolfram Sang <wsa@kernel.org> <w.sang@pengutronix.de>
 Wolfram Sang <wsa@kernel.org> <wsa@the-dreams.de>
 Yakir Yang <kuankuan.y@gmail.com> <ykk@rock-chips.com>
 Yanteng Si <si.yanteng@linux.dev> <siyanteng@loongson.cn>
+Ying Huang <huang.ying.caritas@gmail.com> <ying.huang@intel.com>
 Yusuke Goda <goda.yusuke@renesas.com>
 Zack Rusin <zack.rusin@broadcom.com> <zackr@vmware.com>
 Zhu Yanjun <zyjzyj2000@gmail.com> <yanjunz@nvidia.com>

Documentation/admin-guide/kernel-parameters.txt

@@ -4822,6 +4822,11 @@
 			       can be preempted anytime.  Tasks will also yield
 			       contended spinlocks (if the critical section isn't
 			       explicitly preempt disabled beyond the lock itself).
+			lazy - Scheduler controlled. Similar to full but instead
+			       of preempting the task immediately, the task gets
+			       one HZ tick time to yield itself before the
+			       preemption will be forced. One preemption is when the
+			       task returns to user space.
 
 	print-fatal-signals=
 			[KNL] debug: print fatal signals

Documentation/admin-guide/laptops/thinkpad-acpi.rst

@@ -445,8 +445,10 @@ event	code	Key		Notes
 0x1008	0x07	FN+F8		IBM: toggle screen expand
 				Lenovo: configure UltraNav,
 				or toggle screen expand.
-				On newer platforms (2024+)
-				replaced by 0x131f (see below)
+				On 2024 platforms replaced by
+				0x131f (see below) and on newer
+				platforms (2025 +) keycode is
+				replaced by 0x1401 (see below).
 
 0x1009	0x08	FN+F9		-
 
@@ -506,9 +508,11 @@ event	code	Key		Notes
 
 0x1019	0x18	unknown
 
-0x131f	...	FN+F8	        Platform Mode change.
+0x131f	...	FN+F8		Platform Mode change (2024 systems).
 				Implemented in driver.
 
+0x1401	...	FN+F8		Platform Mode change (2025 + systems).
+				Implemented in driver.
 ...	...	...
 
 0x1020	0x1F	unknown

Documentation/admin-guide/mm/transhuge.rst

@@ -436,7 +436,7 @@ AnonHugePmdMapped).
 The number of file transparent huge pages mapped to userspace is available
 by reading ShmemPmdMapped and ShmemHugePages fields in ``/proc/meminfo``.
 To identify what applications are mapping file transparent huge pages, it
-is necessary to read ``/proc/PID/smaps`` and count the FileHugeMapped fields
+is necessary to read ``/proc/PID/smaps`` and count the FilePmdMapped fields
 for each mapping.
 
 Note that reading the smaps file is expensive and reading it

Documentation/admin-guide/pm/amd-pstate.rst

@@ -251,9 +251,7 @@ performance supported in `AMD CPPC Performance Capability <perf_cap_>`_).
 In some ASICs, the highest CPPC performance is not the one in the ``_CPC``
 table, so we need to expose it to sysfs. If boost is not active, but
 still supported, this maximum frequency will be larger than the one in
-``cpuinfo``. On systems that support preferred core, the driver will have
-different values for some cores than others and this will reflect the values
-advertised by the platform at bootup.
+``cpuinfo``.
 This attribute is read-only.
 
 ``amd_pstate_lowest_nonlinear_freq``

Documentation/devicetree/bindings/crypto/fsl,sec-v4.0.yaml

@@ -114,8 +114,9 @@ patternProperties:
           table that specifies the PPID to LIODN mapping. Needed if the PAMU is
           used.  Value is a 12 bit value where value is a LIODN ID for this JR.
           This property is normally set by boot firmware.
-        $ref: /schemas/types.yaml#/definitions/uint32
-        maximum: 0xfff
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          - maximum: 0xfff
 
   '^rtic@[0-9a-f]+$':
     type: object
@@ -186,8 +187,9 @@ patternProperties:
               Needed if the PAMU is used.  Value is a 12 bit value where value
               is a LIODN ID for this JR. This property is normally set by boot
               firmware.
-            $ref: /schemas/types.yaml#/definitions/uint32
-            maximum: 0xfff
+            $ref: /schemas/types.yaml#/definitions/uint32-array
+            items:
+              - maximum: 0xfff
 
           fsl,rtic-region:
             description:

Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml

@@ -90,7 +90,7 @@ properties:
   adi,dsi-lanes:
     description: Number of DSI data lanes connected to the DSI host.
     $ref: /schemas/types.yaml#/definitions/uint32
-    enum: [ 1, 2, 3, 4 ]
+    enum: [ 2, 3, 4 ]
 
   "#sound-dai-cells":
     const: 0

Documentation/devicetree/bindings/mtd/partitions/fixed-partitions.yaml

@@ -82,7 +82,7 @@ examples:
 
         uimage@100000 {
             reg = <0x0100000 0x200000>;
-            compress = "lzma";
+            compression = "lzma";
         };
     };
 

Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml

@@ -113,11 +113,8 @@ allOf:
           maxItems: 1
 
   - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - fsl,imx95-usb-phy
+      required:
+        - orientation-switch
     then:
       $ref: /schemas/usb/usb-switch.yaml#
 

Documentation/devicetree/bindings/regulator/qcom,qca6390-pmu.yaml

@@ -18,6 +18,7 @@ properties:
   compatible:
     enum:
       - qcom,qca6390-pmu
+      - qcom,wcn6750-pmu
       - qcom,wcn6855-pmu
       - qcom,wcn7850-pmu
 
@@ -27,6 +28,9 @@ properties:
   vddaon-supply:
     description: VDD_AON supply regulator handle
 
+  vddasd-supply:
+    description: VDD_ASD supply regulator handle
+
   vdddig-supply:
     description: VDD_DIG supply regulator handle
 
@@ -42,6 +46,9 @@ properties:
   vddio1p2-supply:
     description: VDD_IO_1P2 supply regulator handle
 
+  vddrfa0p8-supply:
+    description: VDD_RFA_0P8 supply regulator handle
+
   vddrfa0p95-supply:
     description: VDD_RFA_0P95 supply regulator handle
 
@@ -51,12 +58,18 @@ properties:
   vddrfa1p3-supply:
     description: VDD_RFA_1P3 supply regulator handle
 
+  vddrfa1p7-supply:
+    description: VDD_RFA_1P7 supply regulator handle
+
   vddrfa1p8-supply:
     description: VDD_RFA_1P8 supply regulator handle
 
   vddrfa1p9-supply:
     description: VDD_RFA_1P9 supply regulator handle
 
+  vddrfa2p2-supply:
+    description: VDD_RFA_2P2 supply regulator handle
+
   vddpcie1p3-supply:
     description: VDD_PCIE_1P3 supply regulator handle
 
@@ -119,6 +132,20 @@ allOf:
         - vddpcie1p3-supply
         - vddpcie1p9-supply
         - vddio-supply
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,wcn6750-pmu
+    then:
+      required:
+        - vddaon-supply
+        - vddasd-supply
+        - vddpmu-supply
+        - vddrfa0p8-supply
+        - vddrfa1p2-supply
+        - vddrfa1p7-supply
+        - vddrfa2p2-supply
   - if:
       properties:
         compatible: