dt-bindings: regulator: add pca9450: Add regulator-allowed-modes

Make the PWM mode on the buck controllers configurable from devicetree.
Some boards require forced PWM mode to keep the supply ripple within
acceptable limits under light load conditions.

Signed-off-by: Martijn de Gouw <martijn.de.gouw@prodrive-technologies.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20250525071823.819342-1-martijn.de.gouw@prodrive-technologies.com
Signed-off-by: Mark Brown <broonie@kernel.org>

Author: martijndegouw

Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml

@@ -100,6 +100,15 @@ properties:
               PMIC default "STANDBY" state voltage in uV. Only Buck1~3 have such
               dvs(dynamic voltage scaling) property.
 
+          regulator-allowed-modes:
+            description: |
+              Buck regulator operating modes allowed. Valid values below.
+              Users should use the macros from dt-bindings/regulator/nxp,pca9450-regulator.h
+                0 (PCA9450_BUCK_MODE_AUTO): Auto PFM/PWM mode
+                1 (PCA9450_BUCK_MODE_FORCE_PWM): Forced PWM mode
+            items:
+              enum: [ 0, 1 ]
+
         unevaluatedProperties: false
 
     additionalProperties: false
@@ -143,6 +152,7 @@ allOf:
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/regulator/nxp,pca9450-regulator.h>
 
     i2c {
         #address-cells = <1>;
@@ -179,13 +189,17 @@ examples:
                     regulator-max-microvolt = <3400000>;
                     regulator-boot-on;
                     regulator-always-on;
+                    regulator-initial-mode = <PCA9450_BUCK_MODE_FORCE_PWM>;
+                    regulator-allowed-modes = <PCA9450_BUCK_MODE_FORCE_PWM>;
                 };
                 buck5: BUCK5 {
                     regulator-name = "BUCK5";
                     regulator-min-microvolt = <600000>;
                     regulator-max-microvolt = <3400000>;
                     regulator-boot-on;
                     regulator-always-on;
+                    regulator-allowed-modes = <PCA9450_BUCK_MODE_AUTO
+                                               PCA9450_BUCK_MODE_FORCE_PWM>;
                 };
                 buck6: BUCK6 {
                     regulator-name = "BUCK6";

include/dt-bindings/regulator/nxp,pca9450-regulator.h

@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Device Tree binding constants for the NXP PCA9450A/B/C PMIC regulators
+ */
+
+#ifndef _DT_BINDINGS_REGULATORS_NXP_PCA9450_H
+#define _DT_BINDINGS_REGULATORS_NXP_PCA9450_H
+
+/*
+ * Buck mode constants which may be used in devicetree properties (eg.
+ * regulator-initial-mode, regulator-allowed-modes).
+ * See the manufacturer's datasheet for more information on these modes.
+ */
+
+#define PCA9450_BUCK_MODE_AUTO		0
+#define PCA9450_BUCK_MODE_FORCE_PWM	1
+
+#endif