PCI: Move link up wait time and max retries macros to pci.h

Move the LINK_WAIT_SLEEP_MS and LINK_WAIT_MAX_RETRIES macros to pci.h.
Prefix the macros with PCIE_ in order to avoid redefining these for
drivers that already have macros named like this.

No functional changes.

Suggested-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20250625102347.1205584-15-cassel@kernel.org

Author: floatious

drivers/pci/controller/dwc/pcie-designware.c

@@ -702,14 +702,14 @@ int dw_pcie_wait_for_link(struct dw_pcie *pci)
 	int retries;
 
 	/* Check if the link is up or not */
-	for (retries = 0; retries < LINK_WAIT_MAX_RETRIES; retries++) {
+	for (retries = 0; retries < PCIE_LINK_WAIT_MAX_RETRIES; retries++) {
 		if (dw_pcie_link_up(pci))
 			break;
 
-		msleep(LINK_WAIT_SLEEP_MS);
+		msleep(PCIE_LINK_WAIT_SLEEP_MS);
 	}
 
-	if (retries >= LINK_WAIT_MAX_RETRIES) {
+	if (retries >= PCIE_LINK_WAIT_MAX_RETRIES) {
 		dev_info(pci->dev, "Phy link never came up\n");
 		return -ETIMEDOUT;
 	}

drivers/pci/controller/dwc/pcie-designware.h

@@ -62,10 +62,6 @@
 #define dw_pcie_cap_set(_pci, _cap) \
 	set_bit(DW_PCIE_CAP_ ## _cap, &(_pci)->caps)
 
-/* Parameters for the waiting for link up routine */
-#define LINK_WAIT_MAX_RETRIES		10
-#define LINK_WAIT_SLEEP_MS		90
-
 /* Parameters for the waiting for iATU enabled routine */
 #define LINK_WAIT_MAX_IATU_RETRIES	5
 #define LINK_WAIT_IATU			9

drivers/pci/pci.h

@@ -56,6 +56,10 @@ struct pcie_tlp_log;
  */
 #define PCIE_RESET_CONFIG_WAIT_MS	100
 
+/* Parameters for the waiting for link up routine */
+#define PCIE_LINK_WAIT_MAX_RETRIES	10
+#define PCIE_LINK_WAIT_SLEEP_MS		90
+
 /* Message Routing (r[2:0]); PCIe r6.0, sec 2.2.8 */
 #define PCIE_MSG_TYPE_R_RC	0
 #define PCIE_MSG_TYPE_R_ADDR	1