ata: Use always-managed version of pci_intx()

pci_intx() is a hybrid function which can sometimes be managed through
devres. To remove this hybrid nature from pci_intx(), it is necessary to
port users to either an always-managed or a never-managed version.

All users in ata enable their PCI devices with pcim_enable_device(). Thus,
they need the always-managed version.

Replace pci_intx() with pcim_intx().

Link: https://lore.kernel.org/r/20241209130632.132074-10-pstanner@redhat.com
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Acked-by: Niklas Cassel <cassel@kernel.org>

Author: Philipp Stanner

drivers/ata/ahci.c

@@ -1987,7 +1987,7 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	if (ahci_init_msi(pdev, n_ports, hpriv) < 0) {
 		/* legacy intx interrupts */
-		pci_intx(pdev, 1);
+		pcim_intx(pdev, 1);
 	}
 	hpriv->irq = pci_irq_vector(pdev, 0);
 

drivers/ata/ata_piix.c

@@ -1725,7 +1725,7 @@ static int piix_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	 * message-signalled interrupts currently).
 	 */
 	if (port_flags & PIIX_FLAG_CHECKINTR)
-		pci_intx(pdev, 1);
+		pcim_intx(pdev, 1);
 
 	if (piix_check_450nx_errata(pdev)) {
 		/* This writes into the master table but it does not

drivers/ata/pata_rdc.c

@@ -340,7 +340,7 @@ static int rdc_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 		return rc;
 	host->private_data = hpriv;
 
-	pci_intx(pdev, 1);
+	pcim_intx(pdev, 1);
 
 	host->flags |= ATA_HOST_PARALLEL_SCAN;
 

drivers/ata/sata_sil24.c

@@ -1317,7 +1317,7 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	if (sata_sil24_msi && !pci_enable_msi(pdev)) {
 		dev_info(&pdev->dev, "Using MSI\n");
-		pci_intx(pdev, 0);
+		pcim_intx(pdev, 0);
 	}
 
 	pci_set_master(pdev);

drivers/ata/sata_sis.c

@@ -290,7 +290,7 @@ static int sis_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	}
 
 	pci_set_master(pdev);
-	pci_intx(pdev, 1);
+	pcim_intx(pdev, 1);
 	return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt,
 				 IRQF_SHARED, &sis_sht);
 }

drivers/ata/sata_uli.c

@@ -221,7 +221,7 @@ static int uli_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	}
 
 	pci_set_master(pdev);
-	pci_intx(pdev, 1);
+	pcim_intx(pdev, 1);
 	return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt,
 				 IRQF_SHARED, &uli_sht);
 }

drivers/ata/sata_vsc.c

@@ -384,7 +384,7 @@ static int vsc_sata_init_one(struct pci_dev *pdev,
 		pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, 0x80);
 
 	if (pci_enable_msi(pdev) == 0)
-		pci_intx(pdev, 0);
+		pcim_intx(pdev, 0);
 
 	/*
 	 * Config offset 0x98 is "Extended Control and Status Register 0"