ARM: dts: microchip: sam9x60: Add address/size to spi-controller nodes

Since these properties are common for all spi subnodes,
add them to SoC dtsi instead of board dts.

Signed-off-by: Mihai Sain <mihai.sain@microchip.com>
Link: https://lore.kernel.org/r/20241218080333.2225-2-mihai.sain@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>

Author: Mihai Sain

arch/arm/boot/dts/microchip/sam9x60.dtsi

@@ -197,6 +197,8 @@
 					compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
 					reg = <0x400 0x200>;
 					interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
 					clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
 					clock-names = "spi_clk";
 					dmas = <&dma0
@@ -268,6 +270,8 @@
 					compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
 					reg = <0x400 0x200>;
 					interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
 					clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
 					clock-names = "spi_clk";
 					dmas = <&dma0
@@ -768,6 +772,8 @@
 					compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
 					reg = <0x400 0x200>;
 					interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
 					clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
 					clock-names = "spi_clk";
 					dmas = <&dma0
@@ -839,6 +845,8 @@
 					compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
 					reg = <0x400 0x200>;
 					interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
 					clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
 					clock-names = "spi_clk";
 					dmas = <&dma0
@@ -910,6 +918,8 @@
 					compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
 					reg = <0x400 0x200>;
 					interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
 					clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
 					clock-names = "spi_clk";
 					dmas = <&dma0
@@ -981,6 +991,8 @@
 					compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
 					reg = <0x400 0x200>;
 					interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
 					clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
 					clock-names = "spi_clk";
 					dmas = <&dma0