RDMA/hns: Remove unsupport cmdq mode

CMDQ support un-interrupt mode only, and firmware ignores this mode flag,
so remove it.

Fixes: a04ff73 ("RDMA/hns: Add command queue support for hip08 RoCE driver")
Link: https://lore.kernel.org/r/1629539607-33217-2-git-send-email-liangwenpeng@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

Author: larrch

drivers/infiniband/hw/hns/hns_roce_hw_v2.c

@@ -1248,8 +1248,7 @@ static void hns_roce_cmq_setup_basic_desc(struct hns_roce_cmq_desc *desc,
 {
 	memset((void *)desc, 0, sizeof(struct hns_roce_cmq_desc));
 	desc->opcode = cpu_to_le16(opcode);
-	desc->flag =
-		cpu_to_le16(HNS_ROCE_CMD_FLAG_NO_INTR | HNS_ROCE_CMD_FLAG_IN);
+	desc->flag = cpu_to_le16(HNS_ROCE_CMD_FLAG_IN);
 	if (is_read)
 		desc->flag |= cpu_to_le16(HNS_ROCE_CMD_FLAG_WR);
 	else
@@ -1288,16 +1287,11 @@ static int __hns_roce_cmq_send(struct hns_roce_dev *hr_dev,
 	/* Write to hardware */
 	roce_write(hr_dev, ROCEE_TX_CMQ_PI_REG, csq->head);
 
-	/* If the command is sync, wait for the firmware to write back,
-	 * if multi descriptors to be sent, use the first one to check
-	 */
-	if (le16_to_cpu(desc->flag) & HNS_ROCE_CMD_FLAG_NO_INTR) {
-		do {
-			if (hns_roce_cmq_csq_done(hr_dev))
-				break;
-			udelay(1);
-		} while (++timeout < priv->cmq.tx_timeout);
-	}
+	do {
+		if (hns_roce_cmq_csq_done(hr_dev))
+			break;
+		udelay(1);
+	} while (++timeout < priv->cmq.tx_timeout);
 
 	if (hns_roce_cmq_csq_done(hr_dev)) {
 		for (ret = 0, i = 0; i < num; i++) {
@@ -1761,8 +1755,7 @@ static int __hns_roce_set_vf_switch_param(struct hns_roce_dev *hr_dev,
 	if (ret)
 		return ret;
 
-	desc.flag =
-		cpu_to_le16(HNS_ROCE_CMD_FLAG_NO_INTR | HNS_ROCE_CMD_FLAG_IN);
+	desc.flag = cpu_to_le16(HNS_ROCE_CMD_FLAG_IN);
 	desc.flag &= cpu_to_le16(~HNS_ROCE_CMD_FLAG_WR);
 	roce_set_bit(swt->cfg, VF_SWITCH_DATA_CFG_ALW_LPBK_S, 1);
 	roce_set_bit(swt->cfg, VF_SWITCH_DATA_CFG_ALW_LCL_LPBK_S, 0);

drivers/infiniband/hw/hns/hns_roce_hw_v2.h

@@ -129,19 +129,13 @@
 
 #define HNS_ROCE_V2_TABLE_CHUNK_SIZE		(1 << 18)
 
-#define HNS_ROCE_CMD_FLAG_IN_VALID_SHIFT	0
-#define HNS_ROCE_CMD_FLAG_OUT_VALID_SHIFT	1
-#define HNS_ROCE_CMD_FLAG_NEXT_SHIFT		2
-#define HNS_ROCE_CMD_FLAG_WR_OR_RD_SHIFT	3
-#define HNS_ROCE_CMD_FLAG_NO_INTR_SHIFT		4
-#define HNS_ROCE_CMD_FLAG_ERR_INTR_SHIFT	5
-
-#define HNS_ROCE_CMD_FLAG_IN		BIT(HNS_ROCE_CMD_FLAG_IN_VALID_SHIFT)
-#define HNS_ROCE_CMD_FLAG_OUT		BIT(HNS_ROCE_CMD_FLAG_OUT_VALID_SHIFT)
-#define HNS_ROCE_CMD_FLAG_NEXT		BIT(HNS_ROCE_CMD_FLAG_NEXT_SHIFT)
-#define HNS_ROCE_CMD_FLAG_WR		BIT(HNS_ROCE_CMD_FLAG_WR_OR_RD_SHIFT)
-#define HNS_ROCE_CMD_FLAG_NO_INTR	BIT(HNS_ROCE_CMD_FLAG_NO_INTR_SHIFT)
-#define HNS_ROCE_CMD_FLAG_ERR_INTR	BIT(HNS_ROCE_CMD_FLAG_ERR_INTR_SHIFT)
+enum {
+	HNS_ROCE_CMD_FLAG_IN = BIT(0),
+	HNS_ROCE_CMD_FLAG_OUT = BIT(1),
+	HNS_ROCE_CMD_FLAG_NEXT = BIT(2),
+	HNS_ROCE_CMD_FLAG_WR = BIT(3),
+	HNS_ROCE_CMD_FLAG_ERR_INTR = BIT(5),
+};
 
 #define HNS_ROCE_CMQ_DESC_NUM_S		3