Merge tag 'asoc-v6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Updates for v6.8

This is a relatively quiet release, there's a lot of driver specific
changes and the usual high level of activity in the SOF core but the
one big core change was Mormioto-san's work to support more N:M
CPU:CODEC mapping cases.  Highlights include:

 - Enhanced support for N:M CPU:CODEC mappings in the core and in
   audio-graph-card2.
 - Support for falling back to older SOF IPC versions where firmware for
   new versions is not available.
 - Support for notification of control changes generated by SOF firmware
   with IPC4.
 - Device tree support for describing parts of the card which can be
   active over suspend (for very low power playback or wake word use
   cases).
 - ACPI parsing support for the ES83xx driver, reducing the number of
   quirks neede for x86 systems.
 - Support for more AMD and Intel systems, NXP i.MX8m MICFIL, Qualcomm
   SM8250, SM8550, SM8650 and X1E80100.
 - Removal of Freescale MPC8610 support, the SoC is no longer supported
   by Linux.

Author: tiwai

Documentation/arch/loongarch/introduction.rst

@@ -375,9 +375,9 @@ Developer web site of Loongson and LoongArch (Software and Documentation):
 
 Documentation of LoongArch ISA:
 
-  https://github.com/loongson/LoongArch-Documentation/releases/latest/download/LoongArch-Vol1-v1.02-CN.pdf (in Chinese)
+  https://github.com/loongson/LoongArch-Documentation/releases/latest/download/LoongArch-Vol1-v1.10-CN.pdf (in Chinese)
 
-  https://github.com/loongson/LoongArch-Documentation/releases/latest/download/LoongArch-Vol1-v1.02-EN.pdf (in English)
+  https://github.com/loongson/LoongArch-Documentation/releases/latest/download/LoongArch-Vol1-v1.10-EN.pdf (in English)
 
 Documentation of LoongArch ELF psABI:
 

Documentation/devicetree/bindings/sound/adi,max98363.yaml

@@ -39,7 +39,7 @@ unevaluatedProperties: false
 
 examples:
   - |
-    soundwire-controller@3250000 {
+    soundwire@3250000 {
         #address-cells = <2>;
         #size-cells = <0>;
         reg = <0x3250000 0x2000>;

Documentation/devicetree/bindings/sound/audio-graph-port.yaml

@@ -19,6 +19,12 @@ definitions:
     properties:
       mclk-fs:
         $ref: simple-card.yaml#/definitions/mclk-fs
+      playback-only:
+        description: port connection used only for playback
+        $ref: /schemas/types.yaml#/definitions/flag
+      capture-only:
+        description: port connection used only for capture
+        $ref: /schemas/types.yaml#/definitions/flag
 
   endpoint-base:
     allOf:

Documentation/devicetree/bindings/sound/es8328.txt

@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/everest,es8328.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Everest ES8328 audio CODEC
+
+description:
+  Everest Audio Codec, which can be connected via I2C or SPI.
+  Pins on the device (for linking into audio routes) are
+  * LOUT1
+  * LOUT2
+  * ROUT1
+  * ROUT2
+  * LINPUT1
+  * RINPUT1
+  * LINPUT2
+  * RINPUT2
+  * Mic Bias
+
+maintainers:
+  - David Yang <yangxiaohua@everest-semi.com>
+
+properties:
+  compatible:
+    enum:
+      - everest,es8328
+      - everest,es8388
+
+  reg:
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 0
+
+  clocks:
+    items:
+      - description: A 22.5792 or 11.2896 MHz clock
+
+  DVDD-supply:
+    description: Regulator providing digital core supply voltage 1.8 - 3.6V
+
+  AVDD-supply:
+    description: Regulator providing analog supply voltage 3.3V
+
+  PVDD-supply:
+    description: Regulator providing digital IO supply voltage 1.8 - 3.6V
+
+  HPVDD-supply:
+    description: Regulator providing analog output voltage 3.3V
+
+required:
+  - compatible
+  - clocks
+  - DVDD-supply
+  - AVDD-supply
+  - PVDD-supply
+  - HPVDD-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      es8328: codec@11 {
+        compatible = "everest,es8328";
+        reg = <0x11>;
+        AVDD-supply = <&reg_3p3v>;
+        DVDD-supply = <&reg_3p3v>;
+        HPVDD-supply = <&reg_3p3v>;
+        PVDD-supply = <&reg_3p3v>;
+        clocks = <&clks 169>;
+      };
+    };

Documentation/devicetree/bindings/sound/everest,es8328.yaml

@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/fsl,mqs.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP Medium Quality Sound (MQS)
+
+maintainers:
+  - Shengjiu Wang <shengjiu.wang@nxp.com>
+  - Chancel Liu <chancel.liu@nxp.com>
+
+description: |
+  Medium quality sound (MQS) is used to generate medium quality audio
+  via a standard GPIO in the pinmux, allowing the user to connect
+  stereo speakers or headphones to a power amplifier without an
+  additional DAC chip.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx6sx-mqs
+      - fsl,imx8qm-mqs
+      - fsl,imx8qxp-mqs
+      - fsl,imx93-mqs
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    maxItems: 2
+
+  gpr:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle to the General Purpose Register (GPR) node
+
+  reg:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx8qm-mqs
+              - fsl,imx8qxp-mqs
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Master clock
+            - description: Clock for register access
+        clock-names:
+          items:
+            - const: mclk
+            - const: core
+      required:
+        - reg
+        - power-domains
+    else:
+      properties:
+        clocks:
+          items:
+            - description: Master clock
+        clock-names:
+          items:
+            - const: mclk
+      required:
+        - gpr
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx6sx-clock.h>
+    mqs0: mqs {
+        compatible = "fsl,imx6sx-mqs";
+        gpr = <&gpr>;
+        clocks = <&clks IMX6SX_CLK_SAI1>;
+        clock-names = "mclk";
+    };
+
+  - |
+    #include <dt-bindings/firmware/imx/rsrc.h>
+    mqs1: mqs@59850000 {
+        compatible = "fsl,imx8qm-mqs";
+        reg = <0x59850000 0x10000>;
+        clocks = <&mqs0_lpcg 0>, <&mqs0_lpcg 1>;
+        clock-names = "mclk", "core";
+        power-domains = <&pd IMX_SC_R_MQS_0>;
+    };

Documentation/devicetree/bindings/sound/fsl,mqs.txt

@@ -38,7 +38,10 @@ properties:
       - const: txfifo
 
   interrupts:
-    maxItems: 1
+    items:
+      - description: WAKEUPMIX Audio XCVR Interrupt 1
+      - description: WAKEUPMIX Audio XCVR Interrupt 2
+    minItems: 1
 
   clocks:
     items:
@@ -78,6 +81,23 @@ required:
   - dma-names
   - resets
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx93-xcvr
+    then:
+      properties:
+        interrupts:
+          minItems: 2
+          maxItems: 2
+    else:
+      properties:
+        interrupts:
+          maxItems: 1
+
 additionalProperties: false
 
 examples:

Documentation/devicetree/bindings/sound/fsl,mqs.yaml

@@ -15,6 +15,7 @@ allOf:
 properties:
   compatible:
     enum:
+      - mediatek,mt8188-es8326
       - mediatek,mt8188-mt6359-evb
       - mediatek,mt8188-nau8825
       - mediatek,mt8188-rt5682s

Documentation/devicetree/bindings/sound/fsl,xcvr.yaml

@@ -89,6 +89,14 @@ properties:
     $ref: /schemas/types.yaml#/definitions/uint32
     default: 3072000
 
+  nuvoton,dmic-slew-rate:
+    description: The range 0 to 7 represents the speed of DMIC slew rate.
+        The lowest value 0 means the slowest rate and the highest value
+        7 means the fastest rate.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 7
+    default: 0
+
   nuvoton,left-input-single-end:
     description: Enable left input with single-ended settings if set.
         For the headset mic application, the single-ended control is
@@ -127,6 +135,7 @@ examples:
             nuvoton,jack-insert-debounce = <7>;
             nuvoton,jack-eject-debounce = <0>;
             nuvoton,dmic-clk-threshold = <3072000>;
+            nuvoton,dmic-slew-rate = <0>;
             #sound-dai-cells = <0>;
         };
     };