Merge drm/drm-next into drm-misc-next-fixes

Backmerging to get a few more commits that came from drm-misc-next.
See [1]

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/dri-devel/20240229084806.GA21616@localhost.localdomain/ # 1

Author: tdz

Documentation/admin-guide/edid.rst

@@ -24,37 +24,4 @@ restrictions later on.
 As a remedy for such situations, the kernel configuration item
 CONFIG_DRM_LOAD_EDID_FIRMWARE was introduced. It allows to provide an
 individually prepared or corrected EDID data set in the /lib/firmware
-directory from where it is loaded via the firmware interface. The code
-(see drivers/gpu/drm/drm_edid_load.c) contains built-in data sets for
-commonly used screen resolutions (800x600, 1024x768, 1280x1024, 1600x1200,
-1680x1050, 1920x1080) as binary blobs, but the kernel source tree does
-not contain code to create these data. In order to elucidate the origin
-of the built-in binary EDID blobs and to facilitate the creation of
-individual data for a specific misbehaving monitor, commented sources
-and a Makefile environment are given here.
-
-To create binary EDID and C source code files from the existing data
-material, simply type "make" in tools/edid/.
-
-If you want to create your own EDID file, copy the file 1024x768.S,
-replace the settings with your own data and add a new target to the
-Makefile. Please note that the EDID data structure expects the timing
-values in a different way as compared to the standard X11 format.
-
-X11:
-  HTimings:
-    hdisp hsyncstart hsyncend htotal
-  VTimings:
-    vdisp vsyncstart vsyncend vtotal
-
-EDID::
-
-  #define XPIX hdisp
-  #define XBLANK htotal-hdisp
-  #define XOFFSET hsyncstart-hdisp
-  #define XPULSE hsyncend-hsyncstart
-
-  #define YPIX vdisp
-  #define YBLANK vtotal-vdisp
-  #define YOFFSET vsyncstart-vdisp
-  #define YPULSE vsyncend-vsyncstart
+directory from where it is loaded via the firmware interface.

Documentation/admin-guide/kernel-parameters.txt

@@ -1162,16 +1162,10 @@
 			panels may send no or incorrect EDID data sets.
 			This parameter allows to specify an EDID data sets
 			in the /lib/firmware directory that are used instead.
-			Generic built-in EDID data sets are used, if one of
-			edid/1024x768.bin, edid/1280x1024.bin,
-			edid/1680x1050.bin, or edid/1920x1080.bin is given
-			and no file with the same name exists. Details and
-			instructions how to build your own EDID data are
-			available in Documentation/admin-guide/edid.rst. An EDID
-			data set will only be used for a particular connector,
-			if its name and a colon are prepended to the EDID
-			name. Each connector may use a unique EDID data
-			set by separating the files with a comma.  An EDID
+			An EDID data set will only be used for a particular
+			connector, if its name and a colon are prepended to
+			the EDID name. Each connector may use a unique EDID
+			data set by separating the files with a comma. An EDID
 			data set with no connector name will be used for
 			any connectors not explicitly specified.
 

Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml

@@ -19,6 +19,7 @@ properties:
               - qcom,msm8916-dsi-ctrl
               - qcom,msm8953-dsi-ctrl
               - qcom,msm8974-dsi-ctrl
+              - qcom,msm8976-dsi-ctrl
               - qcom,msm8996-dsi-ctrl
               - qcom,msm8998-dsi-ctrl
               - qcom,qcm2290-dsi-ctrl
@@ -248,6 +249,7 @@ allOf:
           contains:
             enum:
               - qcom,msm8953-dsi-ctrl
+              - qcom,msm8976-dsi-ctrl
     then:
       properties:
         clocks:

Documentation/devicetree/bindings/display/msm/gmu.yaml

@@ -224,6 +224,7 @@ allOf:
             enum:
               - qcom,adreno-gmu-730.1
               - qcom,adreno-gmu-740.1
+              - qcom,adreno-gmu-750.1
     then:
       properties:
         reg:

Documentation/devicetree/bindings/display/msm/gpu.yaml

@@ -23,7 +23,7 @@ properties:
           The driver is parsing the compat string for Adreno to
           figure out the gpu-id and patch level.
         items:
-          - pattern: '^qcom,adreno-[3-7][0-9][0-9]\.[0-9]$'
+          - pattern: '^qcom,adreno-[3-7][0-9][0-9]\.[0-9]+$'
           - const: qcom,adreno
       - description: |
           The driver is parsing the compat string for Imageon to
@@ -127,7 +127,7 @@ allOf:
       properties:
         compatible:
           contains:
-            pattern: '^qcom,adreno-[3-5][0-9][0-9]\.[0-9]$'
+            pattern: '^qcom,adreno-[3-5][0-9][0-9]\.[0-9]+$'
 
     then:
       properties:
@@ -203,7 +203,7 @@ allOf:
         properties:
           compatible:
             contains:
-              pattern: '^qcom,adreno-[67][0-9][0-9]\.[0-9]$'
+              pattern: '^qcom,adreno-[67][0-9][0-9]\.[0-9]+$'
 
       then: # Starting with A6xx, the clocks are usually defined in the GMU node
         properties:

Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml

@@ -127,6 +127,7 @@ patternProperties:
           - qcom,dsi-phy-20nm
           - qcom,dsi-phy-28nm-8226
           - qcom,dsi-phy-28nm-hpm
+          - qcom,dsi-phy-28nm-hpm-fam-b
           - qcom,dsi-phy-28nm-lp
           - qcom,hdmi-phy-8084
           - qcom,hdmi-phy-8660

Documentation/devicetree/bindings/display/msm/qcom,sm8650-dpu.yaml

@@ -13,7 +13,9 @@ $ref: /schemas/display/msm/dpu-common.yaml#
 
 properties:
   compatible:
-    const: qcom,sm8650-dpu
+    enum:
+      - qcom,sm8650-dpu
+      - qcom,x1e80100-dpu
 
   reg:
     items:

Documentation/devicetree/bindings/display/msm/qcom,sm8650-mdss.yaml

@@ -37,18 +37,21 @@ properties:
 patternProperties:
   "^display-controller@[0-9a-f]+$":
     type: object
+    additionalProperties: true
     properties:
       compatible:
         const: qcom,sm8650-dpu
 
   "^displayport-controller@[0-9a-f]+$":
     type: object
+    additionalProperties: true
     properties:
       compatible:
         const: qcom,sm8650-dp
 
   "^dsi@[0-9a-f]+$":
     type: object
+    additionalProperties: true
     properties:
       compatible:
         items:
@@ -57,6 +60,7 @@ patternProperties:
 
   "^phy@[0-9a-f]+$":
     type: object
+    additionalProperties: true
     properties:
       compatible:
         const: qcom,sm8650-dsi-phy-4nm