Merge tag 'net-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core:

   - Introduce and use a single page frag cache for allocating small skb
     heads, clawing back the 10-20% performance regression in UDP flood
     test from previous fixes.

   - Run packets which already went thru HW coalescing thru SW GRO. This
     significantly improves TCP segment coalescing and simplifies
     deployments as different workloads benefit from HW or SW GRO.

   - Shrink the size of the base zero-copy send structure.

   - Move TCP init under a new slow / sleepable version of DO_ONCE().

  BPF:

   - Add BPF-specific, any-context-safe memory allocator.

   - Add helpers/kfuncs for PKCS#7 signature verification from BPF
     programs.

   - Define a new map type and related helpers for user space -> kernel
     communication over a ring buffer (BPF_MAP_TYPE_USER_RINGBUF).

   - Allow targeting BPF iterators to loop through resources of one
     task/thread.

   - Add ability to call selected destructive functions. Expose
     crash_kexec() to allow BPF to trigger a kernel dump. Use
     CAP_SYS_BOOT check on the loading process to judge permissions.

   - Enable BPF to collect custom hierarchical cgroup stats efficiently
     by integrating with the rstat framework.

   - Support struct arguments for trampoline based programs. Only
     structs with size <= 16B and x86 are supported.

   - Invoke cgroup/connect{4,6} programs for unprivileged ICMP ping
     sockets (instead of just TCP and UDP sockets).

   - Add a helper for accessing CLOCK_TAI for time sensitive network
     related programs.

   - Support accessing network tunnel metadata's flags.

   - Make TCP SYN ACK RTO tunable by BPF programs with TCP Fast Open.

   - Add support for writing to Netfilter's nf_conn:mark.

  Protocols:

   - WiFi: more Extremely High Throughput (EHT) and Multi-Link Operation
     (MLO) work (802.11be, WiFi 7).

   - vsock: improve support for SO_RCVLOWAT.

   - SMC: support SO_REUSEPORT.

   - Netlink: define and document how to use netlink in a "modern" way.
     Support reporting missing attributes via extended ACK.

   - IPSec: support collect metadata mode for xfrm interfaces.

   - TCPv6: send consistent autoflowlabel in SYN_RECV state and RST
     packets.

   - TCP: introduce optional per-netns connection hash table to allow
     better isolation between namespaces (opt-in, at the cost of memory
     and cache pressure).

   - MPTCP: support TCP_FASTOPEN_CONNECT.

   - Add NEXT-C-SID support in Segment Routing (SRv6) End behavior.

   - Adjust IP_UNICAST_IF sockopt behavior for connected UDP sockets.

   - Open vSwitch:
      - Allow specifying ifindex of new interfaces.
      - Allow conntrack and metering in non-initial user namespace.

   - TLS: support the Korean ARIA-GCM crypto algorithm.

   - Remove DECnet support.

  Driver API:

   - Allow selecting the conduit interface used by each port in DSA
     switches, at runtime.

   - Ethernet Power Sourcing Equipment and Power Device support.

   - Add tc-taprio support for queueMaxSDU parameter, i.e. setting per
     traffic class max frame size for time-based packet schedules.

   - Support PHY rate matching - adapting between differing host-side
     and link-side speeds.

   - Introduce QUSGMII PHY mode and 1000BASE-KX interface mode.

   - Validate OF (device tree) nodes for DSA shared ports; make
     phylink-related properties mandatory on DSA and CPU ports.
     Enforcing more uniformity should allow transitioning to phylink.

   - Require that flash component name used during update matches one of
     the components for which version is reported by info_get().

   - Remove "weight" argument from driver-facing NAPI API as much as
     possible. It's one of those magic knobs which seemed like a good
     idea at the time but is too indirect to use in practice.

   - Support offload of TLS connections with 256 bit keys.

  New hardware / drivers:

   - Ethernet:
      - Microchip KSZ9896 6-port Gigabit Ethernet Switch
      - Renesas Ethernet AVB (EtherAVB-IF) Gen4 SoCs
      - Analog Devices ADIN1110 and ADIN2111 industrial single pair
        Ethernet (10BASE-T1L) MAC+PHY.
      - Rockchip RV1126 Gigabit Ethernet (a version of stmmac IP).

   - Ethernet SFPs / modules:
      - RollBall / Hilink / Turris 10G copper SFPs
      - HALNy GPON module

   - WiFi:
      - CYW43439 SDIO chipset (brcmfmac)
      - CYW89459 PCIe chipset (brcmfmac)
      - BCM4378 on Apple platforms (brcmfmac)

  Drivers:

   - CAN:
      - gs_usb: HW timestamp support

   - Ethernet PHYs:
      - lan8814: cable diagnostics

   - Ethernet NICs:
      - Intel (100G):
         - implement control of FCS/CRC stripping
         - port splitting via devlink
         - L2TPv3 filtering offload
      - nVidia/Mellanox:
         - tunnel offload for sub-functions
         - MACSec offload, w/ Extended packet number and replay window
           offload
         - significantly restructure, and optimize the AF_XDP support,
           align the behavior with other vendors
      - Huawei:
         - configuring DSCP map for traffic class selection
         - querying standard FEC statistics
         - querying SerDes lane number via ethtool
      - Marvell/Cavium:
         - egress priority flow control
         - MACSec offload
      - AMD/SolarFlare:
         - PTP over IPv6 and raw Ethernet
      - small / embedded:
         - ax88772: convert to phylink (to support SFP cages)
         - altera: tse: convert to phylink
         - ftgmac100: support fixed link
         - enetc: standard Ethtool counters
         - macb: ZynqMP SGMII dynamic configuration support
         - tsnep: support multi-queue and use page pool
         - lan743x: Rx IP & TCP checksum offload
         - igc: add xdp frags support to ndo_xdp_xmit

   - Ethernet high-speed switches:
      - Marvell (prestera):
         - support SPAN port features (traffic mirroring)
         - nexthop object offloading
      - Microchip (sparx5):
         - multicast forwarding offload
         - QoS queuing offload (tc-mqprio, tc-tbf, tc-ets)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - support RGMII cmode
      - NXP (felix):
         - standardized ethtool counters
      - Microchip (lan966x):
         - QoS queuing offload (tc-mqprio, tc-tbf, tc-cbs, tc-ets)
         - traffic policing and mirroring
         - link aggregation / bonding offload
         - QUSGMII PHY mode support

   - Qualcomm 802.11ax WiFi (ath11k):
      - cold boot calibration support on WCN6750
      - support to connect to a non-transmit MBSSID AP profile
      - enable remain-on-channel support on WCN6750
      - Wake-on-WLAN support for WCN6750
      - support to provide transmit power from firmware via nl80211
      - support to get power save duration for each client
      - spectral scan support for 160 MHz

   - MediaTek WiFi (mt76):
      - WiFi-to-Ethernet bridging offload for MT7986 chips

   - RealTek WiFi (rtw89):
      - P2P support"

* tag 'net-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1864 commits)
  eth: pse: add missing static inlines
  once: rename _SLOW to _SLEEPABLE
  net: pse-pd: add regulator based PSE driver
  dt-bindings: net: pse-dt: add bindings for regulator based PoDL PSE controller
  ethtool: add interface to interact with Ethernet Power Equipment
  net: mdiobus: search for PSE nodes by parsing PHY nodes.
  net: mdiobus: fwnode_mdiobus_register_phy() rework error handling
  net: add framework to support Ethernet PSE and PDs devices
  dt-bindings: net: phy: add PoDL PSE property
  net: marvell: prestera: Propagate nh state from hw to kernel
  net: marvell: prestera: Add neighbour cache accounting
  net: marvell: prestera: add stub handler neighbour events
  net: marvell: prestera: Add heplers to interact with fib_notifier_info
  net: marvell: prestera: Add length macros for prestera_ip_addr
  net: marvell: prestera: add delayed wq and flush wq on deinit
  net: marvell: prestera: Add strict cleanup of fib arbiter
  net: marvell: prestera: Add cleanup of allocated fib_nodes
  net: marvell: prestera: Add router nexthops ABI
  eth: octeon: fix build after netif_napi_add() changes
  net/mlx5: E-Switch, Return EBUSY if can't get mode lock
  ...

Author: torvalds

Documentation/admin-guide/kernel-parameters.txt

@@ -966,10 +966,6 @@
 
 	debugpat	[X86] Enable PAT debugging
 
-	decnet.addr=	[HW,NET]
-			Format: <area>[,<node>]
-			See also Documentation/networking/decnet.rst.
-
 	default_hugepagesz=
 			[HW] The size of the default HugeTLB page. This is
 			the size represented by the legacy /proc/ hugepages

Documentation/admin-guide/sysctl/net.rst

@@ -31,17 +31,18 @@ see only some of them, depending on your kernel's configuration.
 
 Table : Subdirectories in /proc/sys/net
 
- ========= =================== = ========== ==================
+ ========= =================== = ========== ===================
  Directory Content               Directory  Content
- ========= =================== = ========== ==================
- core      General parameter     appletalk  Appletalk protocol
- unix      Unix domain sockets   netrom     NET/ROM
- 802       E802 protocol         ax25       AX25
- ethernet  Ethernet protocol     rose       X.25 PLP layer
+ ========= =================== = ========== ===================
+ 802       E802 protocol         mptcp      Multipath TCP
+ appletalk Appletalk protocol    netfilter  Network Filter
+ ax25      AX25                  netrom     NET/ROM
+ bridge    Bridging              rose       X.25 PLP layer
+ core      General parameter     tipc       TIPC
+ ethernet  Ethernet protocol     unix       Unix domain sockets
  ipv4      IP version 4          x25        X.25 protocol
- bridge    Bridging              decnet     DEC net
- ipv6      IP version 6          tipc       TIPC
- ========= =================== = ========== ==================
+ ipv6      IP version 6
+ ========= =================== = ========== ===================
 
 1. /proc/sys/net/core - Network core options
 ============================================
@@ -101,6 +102,9 @@ Values:
 	- 1 - enable JIT hardening for unprivileged users only
 	- 2 - enable JIT hardening for all users
 
+where "privileged user" in this context means a process having
+CAP_BPF or CAP_SYS_ADMIN in the root user name space.
+
 bpf_jit_kallsyms
 ----------------
 

Documentation/bpf/clang-notes.rst

@@ -0,0 +1,30 @@
+.. contents::
+.. sectnum::
+
+==========================
+Clang implementation notes
+==========================
+
+This document provides more details specific to the Clang/LLVM implementation of the eBPF instruction set.
+
+Versions
+========
+
+Clang defined "CPU" versions, where a CPU version of 3 corresponds to the current eBPF ISA.
+
+Clang can select the eBPF ISA version using ``-mcpu=v3`` for example to select version 3.
+
+Arithmetic instructions
+=======================
+
+For CPU versions prior to 3, Clang v7.0 and later can enable ``BPF_ALU`` support with
+``-Xclang -target-feature -Xclang +alu32``.  In CPU version 3, support is automatically included.
+
+Atomic operations
+=================
+
+Clang can generate atomic instructions by default when ``-mcpu=v3`` is
+enabled. If a lower version for ``-mcpu`` is set, the only atomic instruction
+Clang can generate is ``BPF_ADD`` *without* ``BPF_FETCH``. If you need to enable
+the atomics features, while keeping a lower ``-mcpu`` version, you can use
+``-Xclang -target-feature -Xclang +alu32``.

Documentation/bpf/index.rst

@@ -26,6 +26,8 @@ that goes into great technical depth about the BPF Architecture.
    classic_vs_extended.rst
    bpf_licensing
    test_debug
+   clang-notes
+   linux-notes
    other
 
 .. only::  subproject and html