ARM: dts: qcom: msm8974: remove superfluous "input-enable"

Pin configuration property "input-enable" was used with the intention to
disable the output, but this is done by default by Linux drivers.  Since
patch ("dt-bindings: pinctrl: qcom: tlmm should use output-disable, not
input-enable") the property is not accepted anymore.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230410181005.25853-3-krzysztof.kozlowski@linaro.org

Author: krzk

arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts

@@ -592,7 +592,6 @@
 		pins = "gpio73";
 		function = "gpio";
 		bias-disable;
-		input-enable;
 	};
 
 	touch_pin: touch-state {
@@ -602,7 +601,6 @@
 
 			drive-strength = <2>;
 			bias-disable;
-			input-enable;
 		};
 
 		reset-pins {

arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi

@@ -433,7 +433,6 @@
 		function = "gpio";
 		drive-strength = <2>;
 		bias-disable;
-		input-enable;
 	};
 
 	sdc1_on: sdc1-on-state {

arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts

@@ -461,7 +461,6 @@
 			function = "gpio";
 			drive-strength = <2>;
 			bias-disable;
-			input-enable;
 		};
 
 		reset-pins {

arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts

@@ -704,7 +704,6 @@
 			pins = "gpio75";
 			function = "gpio";
 			drive-strength = <16>;
-			input-enable;
 		};
 
 		devwake-pins {
@@ -760,14 +759,12 @@
 	i2c_touchkey_pins: i2c-touchkey-state {
 		pins = "gpio95", "gpio96";
 		function = "gpio";
-		input-enable;
 		bias-pull-up;
 	};
 
 	i2c_led_gpioex_pins: i2c-led-gpioex-state {
 		pins = "gpio120", "gpio121";
 		function = "gpio";
-		input-enable;
 		bias-pull-down;
 	};
 
@@ -781,7 +778,6 @@
 	wifi_pin: wifi-state {
 		pins = "gpio92";
 		function = "gpio";
-		input-enable;
 		bias-pull-down;
 	};
 

arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts

@@ -631,7 +631,6 @@
 		function = "gpio";
 		drive-strength = <2>;
 		bias-disable;
-		input-enable;
 	};
 
 	bt_host_wake_pin: bt-host-wake-state {