clk: zynqmp: Handle divider specific read only flag

Add support for divider specific read only CCF flag
(CLK_DIVIDER_READ_ONLY).

Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Link: https://lore.kernel.org/r/20210628070122.26217-5-rajan.vaja@xilinx.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

Author: rajanv-xilinx

drivers/clk/zynqmp/divider.c

@@ -256,6 +256,11 @@ static const struct clk_ops zynqmp_clk_divider_ops = {
 	.set_rate = zynqmp_clk_divider_set_rate,
 };
 
+static const struct clk_ops zynqmp_clk_divider_ro_ops = {
+	.recalc_rate = zynqmp_clk_divider_recalc_rate,
+	.round_rate = zynqmp_clk_divider_round_rate,
+};
+
 /**
  * zynqmp_clk_get_max_divisor() - Get maximum supported divisor from firmware.
  * @clk_id:		Id of clock
@@ -334,7 +339,10 @@ struct clk_hw *zynqmp_clk_register_divider(const char *name,
 		return ERR_PTR(-ENOMEM);
 
 	init.name = name;
-	init.ops = &zynqmp_clk_divider_ops;
+	if (nodes->type_flag & CLK_DIVIDER_READ_ONLY)
+		init.ops = &zynqmp_clk_divider_ro_ops;
+	else
+		init.ops = &zynqmp_clk_divider_ops;
 
 	init.flags = zynqmp_clk_map_common_ccf_flags(nodes->flag);