Merge tag 'char-misc-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver fixes from Greg KH:
 "Here are a small number of char/misc driver fixes for 5.17-rc4 for
  reported issues. They contain:

   - phy driver fixes

   - iio driver fix

   - eeprom driver fix

   - speakup regression fix

   - fastrpc fix

  All of these have been in linux-next with no reported issues"

* tag 'char-misc-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  iio: buffer: Fix file related error handling in IIO_BUFFER_GET_FD_IOCTL
  speakup-dectlk: Restore pitch setting
  bus: mhi: pci_generic: Add mru_default for Cinterion MV31-W
  bus: mhi: pci_generic: Add mru_default for Foxconn SDX55
  eeprom: ee1004: limit i2c reads to I2C_SMBUS_BLOCK_MAX
  misc: fastrpc: avoid double fput() on failed usercopy
  phy: dphy: Correct clk_pre parameter
  phy: phy-mtk-tphy: Fix duplicated argument in phy-mtk-tphy
  phy: stm32: fix a refcount leak in stm32_usbphyc_pll_enable()
  phy: xilinx: zynqmp: Fix bus width setting for SGMII
  phy: cadence: Sierra: fix error handling bugs in probe()
  phy: ti: Fix missing sentinel for clk_div_table
  phy: broadcom: Kconfig: Fix PHY_BRCM_USB config option
  phy: usb: Leave some clocks running during suspend

Author: torvalds

drivers/accessibility/speakup/speakup_dectlk.c

@@ -44,6 +44,7 @@ static struct var_t vars[] = {
 	{ CAPS_START, .u.s = {"[:dv ap 160] " } },
 	{ CAPS_STOP, .u.s = {"[:dv ap 100 ] " } },
 	{ RATE, .u.n = {"[:ra %d] ", 180, 75, 650, 0, 0, NULL } },
+	{ PITCH, .u.n = {"[:dv ap %d] ", 122, 50, 350, 0, 0, NULL } },
 	{ INFLECTION, .u.n = {"[:dv pr %d] ", 100, 0, 10000, 0, 0, NULL } },
 	{ VOL, .u.n = {"[:dv g5 %d] ", 86, 60, 86, 0, 0, NULL } },
 	{ PUNCT, .u.n = {"[:pu %c] ", 0, 0, 2, 0, 0, "nsa" } },

drivers/bus/mhi/pci_generic.c

@@ -366,6 +366,7 @@ static const struct mhi_pci_dev_info mhi_foxconn_sdx55_info = {
 	.config = &modem_foxconn_sdx55_config,
 	.bar_num = MHI_PCI_DEFAULT_BAR_NUM,
 	.dma_data_width = 32,
+	.mru_default = 32768,
 	.sideband_wake = false,
 };
 
@@ -401,6 +402,7 @@ static const struct mhi_pci_dev_info mhi_mv31_info = {
 	.config = &modem_mv31_config,
 	.bar_num = MHI_PCI_DEFAULT_BAR_NUM,
 	.dma_data_width = 32,
+	.mru_default = 32768,
 };
 
 static const struct mhi_channel_config mhi_sierra_em919x_channels[] = {

drivers/gpu/drm/bridge/nwl-dsi.c

@@ -7,6 +7,7 @@
  */
 
 #include <linux/bitfield.h>
+#include <linux/bits.h>
 #include <linux/clk.h>
 #include <linux/irq.h>
 #include <linux/math64.h>
@@ -196,12 +197,9 @@ static u32 ps2bc(struct nwl_dsi *dsi, unsigned long long ps)
 /*
  * ui2bc - UI time periods to byte clock cycles
  */
-static u32 ui2bc(struct nwl_dsi *dsi, unsigned long long ui)
+static u32 ui2bc(unsigned int ui)
 {
-	u32 bpp = mipi_dsi_pixel_format_to_bpp(dsi->format);
-
-	return DIV64_U64_ROUND_UP(ui * dsi->lanes,
-				  dsi->mode.clock * 1000 * bpp);
+	return DIV_ROUND_UP(ui, BITS_PER_BYTE);
 }
 
 /*
@@ -232,12 +230,12 @@ static int nwl_dsi_config_host(struct nwl_dsi *dsi)
 	}
 
 	/* values in byte clock cycles */
-	cycles = ui2bc(dsi, cfg->clk_pre);
+	cycles = ui2bc(cfg->clk_pre);
 	DRM_DEV_DEBUG_DRIVER(dsi->dev, "cfg_t_pre: 0x%x\n", cycles);
 	nwl_dsi_write(dsi, NWL_DSI_CFG_T_PRE, cycles);
 	cycles = ps2bc(dsi, cfg->lpx + cfg->clk_prepare + cfg->clk_zero);
 	DRM_DEV_DEBUG_DRIVER(dsi->dev, "cfg_tx_gap (pre): 0x%x\n", cycles);
-	cycles += ui2bc(dsi, cfg->clk_pre);
+	cycles += ui2bc(cfg->clk_pre);
 	DRM_DEV_DEBUG_DRIVER(dsi->dev, "cfg_t_post: 0x%x\n", cycles);
 	nwl_dsi_write(dsi, NWL_DSI_CFG_T_POST, cycles);
 	cycles = ps2bc(dsi, cfg->hs_exit);

drivers/iio/industrialio-buffer.c

@@ -1569,9 +1569,17 @@ static long iio_device_buffer_getfd(struct iio_dev *indio_dev, unsigned long arg
 	}
 
 	if (copy_to_user(ival, &fd, sizeof(fd))) {
-		put_unused_fd(fd);
-		ret = -EFAULT;
-		goto error_free_ib;
+		/*
+		 * "Leak" the fd, as there's not much we can do about this
+		 * anyway. 'fd' might have been closed already, as
+		 * anon_inode_getfd() called fd_install() on it, which made
+		 * it reachable by userland.
+		 *
+		 * Instead of allowing a malicious user to play tricks with
+		 * us, rely on the process exit path to do any necessary
+		 * cleanup, as in releasing the file, if still needed.
+		 */
+		return -EFAULT;
 	}
 
 	return 0;

drivers/misc/eeprom/ee1004.c

@@ -114,6 +114,9 @@ static ssize_t ee1004_eeprom_read(struct i2c_client *client, char *buf,
 	if (offset + count > EE1004_PAGE_SIZE)
 		count = EE1004_PAGE_SIZE - offset;
 
+	if (count > I2C_SMBUS_BLOCK_MAX)
+		count = I2C_SMBUS_BLOCK_MAX;
+
 	return i2c_smbus_read_i2c_block_data_or_emulated(client, offset, count, buf);
 }
 

drivers/misc/fastrpc.c

@@ -1288,7 +1288,14 @@ static int fastrpc_dmabuf_alloc(struct fastrpc_user *fl, char __user *argp)
 	}
 
 	if (copy_to_user(argp, &bp, sizeof(bp))) {
-		dma_buf_put(buf->dmabuf);
+		/*
+		 * The usercopy failed, but we can't do much about it, as
+		 * dma_buf_fd() already called fd_install() and made the
+		 * file descriptor accessible for the current process. It
+		 * might already be closed and dmabuf no longer valid when
+		 * we reach this point. Therefore "leak" the fd and rely on
+		 * the process exit path to do any required cleanup.
+		 */
 		return -EFAULT;
 	}
 

drivers/phy/amlogic/phy-meson-axg-mipi-dphy.c

@@ -9,6 +9,7 @@
 
 #include <linux/bitfield.h>
 #include <linux/bitops.h>
+#include <linux/bits.h>
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/io.h>
@@ -250,7 +251,7 @@ static int phy_meson_axg_mipi_dphy_power_on(struct phy *phy)
 		     (DIV_ROUND_UP(priv->config.clk_zero, temp) << 16) |
 		     (DIV_ROUND_UP(priv->config.clk_prepare, temp) << 24));
 	regmap_write(priv->regmap, MIPI_DSI_CLK_TIM1,
-		     DIV_ROUND_UP(priv->config.clk_pre, temp));
+		     DIV_ROUND_UP(priv->config.clk_pre, BITS_PER_BYTE));
 
 	regmap_write(priv->regmap, MIPI_DSI_HS_TIM,
 		     DIV_ROUND_UP(priv->config.hs_exit, temp) |

drivers/phy/broadcom/Kconfig

@@ -97,8 +97,7 @@ config PHY_BRCM_USB
 	depends on OF
 	select GENERIC_PHY
 	select SOC_BRCMSTB if ARCH_BRCMSTB
-	default ARCH_BCM4908
-	default ARCH_BRCMSTB
+	default ARCH_BCM4908 || ARCH_BRCMSTB
 	help
 	  Enable this to support the Broadcom STB USB PHY.
 	  This driver is required by the USB XHCI, EHCI and OHCI

drivers/phy/broadcom/phy-brcm-usb.c

@@ -18,6 +18,7 @@
 #include <linux/soc/brcmstb/brcmstb.h>
 #include <dt-bindings/phy/phy.h>
 #include <linux/mfd/syscon.h>
+#include <linux/suspend.h>
 
 #include "phy-brcm-usb-init.h"
 
@@ -70,12 +71,35 @@ struct brcm_usb_phy_data {
 	int			init_count;
 	int			wake_irq;
 	struct brcm_usb_phy	phys[BRCM_USB_PHY_ID_MAX];
+	struct notifier_block	pm_notifier;
+	bool			pm_active;
 };
 
 static s8 *node_reg_names[BRCM_REGS_MAX] = {
 	"crtl", "xhci_ec", "xhci_gbl", "usb_phy", "usb_mdio", "bdc_ec"
 };
 
+static int brcm_pm_notifier(struct notifier_block *notifier,
+			    unsigned long pm_event,
+			    void *unused)
+{
+	struct brcm_usb_phy_data *priv =
+		container_of(notifier, struct brcm_usb_phy_data, pm_notifier);
+
+	switch (pm_event) {
+	case PM_HIBERNATION_PREPARE:
+	case PM_SUSPEND_PREPARE:
+		priv->pm_active = true;
+		break;
+	case PM_POST_RESTORE:
+	case PM_POST_HIBERNATION:
+	case PM_POST_SUSPEND:
+		priv->pm_active = false;
+		break;
+	}
+	return NOTIFY_DONE;
+}
+
 static irqreturn_t brcm_usb_phy_wake_isr(int irq, void *dev_id)
 {
 	struct phy *gphy = dev_id;
@@ -91,6 +115,9 @@ static int brcm_usb_phy_init(struct phy *gphy)
 	struct brcm_usb_phy_data *priv =
 		container_of(phy, struct brcm_usb_phy_data, phys[phy->id]);
 
+	if (priv->pm_active)
+		return 0;
+
 	/*
 	 * Use a lock to make sure a second caller waits until
 	 * the base phy is inited before using it.
@@ -120,6 +147,9 @@ static int brcm_usb_phy_exit(struct phy *gphy)
 	struct brcm_usb_phy_data *priv =
 		container_of(phy, struct brcm_usb_phy_data, phys[phy->id]);
 
+	if (priv->pm_active)
+		return 0;
+
 	dev_dbg(&gphy->dev, "EXIT\n");
 	if (phy->id == BRCM_USB_PHY_2_0)
 		brcm_usb_uninit_eohci(&priv->ini);
@@ -488,6 +518,9 @@ static int brcm_usb_phy_probe(struct platform_device *pdev)
 	if (err)
 		return err;
 
+	priv->pm_notifier.notifier_call = brcm_pm_notifier;
+	register_pm_notifier(&priv->pm_notifier);
+
 	mutex_init(&priv->mutex);
 
 	/* make sure invert settings are correct */
@@ -528,7 +561,10 @@ static int brcm_usb_phy_probe(struct platform_device *pdev)
 
 static int brcm_usb_phy_remove(struct platform_device *pdev)
 {
+	struct brcm_usb_phy_data *priv = dev_get_drvdata(&pdev->dev);
+
 	sysfs_remove_group(&pdev->dev.kobj, &brcm_usb_phy_group);
+	unregister_pm_notifier(&priv->pm_notifier);
 
 	return 0;
 }
@@ -539,6 +575,7 @@ static int brcm_usb_phy_suspend(struct device *dev)
 	struct brcm_usb_phy_data *priv = dev_get_drvdata(dev);
 
 	if (priv->init_count) {
+		dev_dbg(dev, "SUSPEND\n");
 		priv->ini.wake_enabled = device_may_wakeup(dev);
 		if (priv->phys[BRCM_USB_PHY_3_0].inited)
 			brcm_usb_uninit_xhci(&priv->ini);
@@ -578,6 +615,7 @@ static int brcm_usb_phy_resume(struct device *dev)
 	 * Uninitialize anything that wasn't previously initialized.
 	 */
 	if (priv->init_count) {
+		dev_dbg(dev, "RESUME\n");
 		if (priv->wake_irq >= 0)
 			disable_irq_wake(priv->wake_irq);
 		brcm_usb_init_common(&priv->ini);

drivers/phy/cadence/phy-cadence-sierra.c

@@ -1338,7 +1338,7 @@ static int cdns_sierra_phy_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	const struct cdns_sierra_data *data;
 	unsigned int id_value;
-	int i, ret, node = 0;
+	int ret, node = 0;
 	void __iomem *base;
 	struct device_node *dn = dev->of_node, *child;
 
@@ -1416,15 +1416,18 @@ static int cdns_sierra_phy_probe(struct platform_device *pdev)
 			dev_err(dev, "failed to get reset %s\n",
 				child->full_name);
 			ret = PTR_ERR(sp->phys[node].lnk_rst);
-			goto put_child2;
+			of_node_put(child);
+			goto put_control;
 		}
 
 		if (!sp->autoconf) {
 			ret = cdns_sierra_get_optional(&sp->phys[node], child);
 			if (ret) {
 				dev_err(dev, "missing property in node %s\n",
 					child->name);
-				goto put_child;
+				of_node_put(child);
+				reset_control_put(sp->phys[node].lnk_rst);
+				goto put_control;
 			}
 		}
 
@@ -1434,7 +1437,9 @@ static int cdns_sierra_phy_probe(struct platform_device *pdev)
 
 		if (IS_ERR(gphy)) {
 			ret = PTR_ERR(gphy);
-			goto put_child;
+			of_node_put(child);
+			reset_control_put(sp->phys[node].lnk_rst);
+			goto put_control;
 		}
 		sp->phys[node].phy = gphy;
 		phy_set_drvdata(gphy, &sp->phys[node]);
@@ -1446,26 +1451,28 @@ static int cdns_sierra_phy_probe(struct platform_device *pdev)
 	if (sp->num_lanes > SIERRA_MAX_LANES) {
 		ret = -EINVAL;
 		dev_err(dev, "Invalid lane configuration\n");
-		goto put_child2;
+		goto put_control;
 	}
 
 	/* If more than one subnode, configure the PHY as multilink */
 	if (!sp->autoconf && sp->nsubnodes > 1) {
 		ret = cdns_sierra_phy_configure_multilink(sp);
 		if (ret)
-			goto put_child2;
+			goto put_control;
 	}
 
 	pm_runtime_enable(dev);
 	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
-	return PTR_ERR_OR_ZERO(phy_provider);
-
-put_child:
-	node++;
-put_child2:
-	for (i = 0; i < node; i++)
-		reset_control_put(sp->phys[i].lnk_rst);
-	of_node_put(child);
+	if (IS_ERR(phy_provider)) {
+		ret = PTR_ERR(phy_provider);
+		goto put_control;
+	}
+
+	return 0;
+
+put_control:
+	while (--node >= 0)
+		reset_control_put(sp->phys[node].lnk_rst);
 clk_disable:
 	cdns_sierra_phy_disable_clocks(sp);
 	reset_control_assert(sp->apb_rst);