ARM64: dts: marvell: cn9310: Use appropriate label for spi1 pins

Both the CN9130-CRB and CN9130-DB use the SPI1 interface but had the
pinctrl node labelled as "cp0_spi0_pins". Use the label "cp0_spi1_pins"
and update the node name to "cp0-spi-pins-1" to avoid confusion with the
pinctrl options for SPI0.

Fixes: 4c43a41 ("arm64: dts: cn913x: add device trees for topology B boards")
Fixes: 5c0ee54 ("arm64: dts: add support for Marvell cn9130-crb platform")
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

Author: cpackham-atlnz

arch/arm64/boot/dts/marvell/cn9130-crb.dtsi

@@ -120,7 +120,7 @@
 				       "mpp59", "mpp60", "mpp61";
 			marvell,function = "sdio";
 		};
-		cp0_spi0_pins: cp0-spi-pins-0 {
+		cp0_spi1_pins: cp0-spi-pins-1 {
 			marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
 			marvell,function = "spi1";
 		};
@@ -170,7 +170,7 @@
 
 &cp0_spi1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&cp0_spi0_pins>;
+	pinctrl-0 = <&cp0_spi1_pins>;
 	reg = <0x700680 0x50>,		/* control */
 	      <0x2000000 0x1000000>;	/* CS0 */
 	status = "okay";

arch/arm64/boot/dts/marvell/cn9130-db.dtsi

@@ -307,7 +307,7 @@
 &cp0_spi1 {
 	status = "disabled";
 	pinctrl-names = "default";
-	pinctrl-0 = <&cp0_spi0_pins>;
+	pinctrl-0 = <&cp0_spi1_pins>;
 	reg = <0x700680 0x50>;
 
 	flash@0 {
@@ -371,7 +371,7 @@
 				       "mpp59", "mpp60", "mpp61";
 			marvell,function = "sdio";
 		};
-		cp0_spi0_pins: cp0-spi-pins-0 {
+		cp0_spi1_pins: cp0-spi-pins-1 {
 			marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
 			marvell,function = "spi1";
 		};