dt-bindings: gnss: Add two more chips

The CSR GSD4t is a CSR product using the SiRFstarIV core, and
the CSR CSRG05TA03-ICJE-R is a CSR product using the SiRFstarV
core.

These chips have a SRESETN line that can be pulled low to hard
reset the chip and in some designs this is connected to a GPIO,
so add this as an optional property.

Update the example with a reset line so users see that it need
to be tagged as active low.

Cc: devicetree@vger.kernel.org
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220317225844.1262643-4-linus.walleij@linaro.org

Author: Linus Walleij

Documentation/devicetree/bindings/gnss/sirfstar.yaml

@@ -25,6 +25,8 @@ allOf:
 properties:
   compatible:
     enum:
+      - csr,gsd4t
+      - csr,csrg05ta03-icje-r
       - fastrax,uc430
       - linx,r4
       - wi2wi,w2sg0004
@@ -39,6 +41,11 @@ properties:
     description:
       Main voltage regulator, pin names such as 3V3_IN, VCC, VDD.
 
+  reset-gpios:
+    maxItems: 1
+    description: An optional active low reset line, should be flagged with
+      GPIO_ACTIVE_LOW.
+
   sirf,onoff-gpios:
     maxItems: 1
     description: GPIO used to power on and off device, pin name ON_OFF.
@@ -61,6 +68,7 @@ examples:
         gnss {
             compatible = "wi2wi,w2sg0084i";
             vcc-supply = <&gnss_vcc_reg>;
+            reset-gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
             sirf,onoff-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
             sirf,wakeup-gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
             current-speed = <38400>;