clk: renesas: rzg2l: Deassert reset on assert timeout

If the assert() fails due to timeout error, set the reset register bit
back to deasserted state. This change is needed especially for handling
assert error in suspend() callback that expect the device to be in
operational state in case of failure.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260108123433.104464-2-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Author: bijudas

drivers/clk/renesas/rzg2l-cpg.c

@@ -1647,6 +1647,7 @@ static int __rzg2l_cpg_assert(struct reset_controller_dev *rcdev,
 	u32 mask = BIT(info->resets[id].bit);
 	s8 monbit = info->resets[id].monbit;
 	u32 value = mask << 16;
+	u32 mon;
 	int ret;
 
 	dev_dbg(rcdev->dev, "%s id:%ld offset:0x%x\n",
@@ -1667,10 +1668,10 @@ static int __rzg2l_cpg_assert(struct reset_controller_dev *rcdev,
 		return 0;
 	}
 
-	ret = readl_poll_timeout_atomic(priv->base + reg, value,
-					assert == !!(value & mask), 10, 200);
-	if (ret && !assert) {
-		value = mask << 16;
+	ret = readl_poll_timeout_atomic(priv->base + reg, mon,
+					assert == !!(mon & mask), 10, 200);
+	if (ret) {
+		value ^= mask;
 		writel(value, priv->base + CLK_RST_R(info->resets[id].off));
 	}