Merge tag 'hwmon-for-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon updates from Guenter Roeck:
 "New drivers:

   - Driver for MAX31760 fan speed controller

   - Driver for TEXAS TPS546D24 Buck Converter

   - Driver for EMC2301/2/3/5 RPM-based PWM Fan Speed Controller

  Removed drivers:

   - Drop obsolete asus_wmi_ec_sensors driver

  Cleanups, affecting various drivers:

   - Use DEFINE_SIMPLE_DEV_PM_OPS where appropriate

   - Remove forward declarations

   - Move from strlcpy with unused retval to strscpy

   - Make use of devm_clk_get_enabled()

   - Drop devm_of_pwm_get()

  Other notable cleanup and improvements:

   - Support for additional USB devide ID and support for reporting of
     rail mode via debugfs added to corsair-psu driver

   - Support for aditional USB ID in nzxt-smart2 driver

   - Support for Aquacomputer High Flow Next in aquacomputer_d5next
     driver

   - Major cleanup of pwm-fan driver

   - Major cleanup of mr75203 driver, and added support for new device
     revision

  And various other minor fixes and cleanups"

* tag 'hwmon-for-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (86 commits)
  hwmon: (corsair-psu) add USB id of new revision of the HX1000i psu
  hwmon: (pmbus/mp2888) Fix sensors readouts for MPS Multi-phase mp2888 controller
  dt-bindings: hwmon: sensirion,shtc1: Clean up spelling mistakes and grammar
  hwmon: (nct6683) remove unused variable in nct6683_create_attr_group
  hwmon: w83627hf: Reorder symbols to get rid of a few forward declarations
  hwmon: (ina3221) Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr()
  hwmon: (w83627ehf) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  hwmon: (tmp108) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  hwmon: (tmp103) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  hwmon: (tmp102) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  hwmon: (pwm-fan) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  hwmon: (nct6775) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  hwmon: (max6639) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  hwmon: (max31730) witch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  hwmon: (max31722) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  hwmon: (ltc2947) Switch to EXPORT_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  hwmon: (lm90) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  hwmon: (it87) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  hwmon: (gpio-fan) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  hwmon: (adt7x10) Switch to EXPORT_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  ...

Author: torvalds

Documentation/devicetree/bindings/hwmon/adi,max31760.yaml

@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/adi,max31760.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices MAX31760 Fan-Speed Controller
+
+maintainers:
+  - Ibrahim Tilki <Ibrahim.Tilki@analog.com>
+
+description: |
+  Analog Devices MAX31760 Fan-Speed Controller
+  https://datasheets.maximintegrated.com/en/ds/MAX31760.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,max31760
+
+  reg:
+    description: I2C address of slave device.
+    minimum: 0x50
+    maximum: 0x57
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        fan-controller@50 {
+            reg = <0x50>;
+            compatible = "adi,max31760";
+        };
+    };

Documentation/devicetree/bindings/hwmon/microchip,sparx5-temp.yaml

@@ -22,7 +22,7 @@ properties:
 
   clocks:
     items:
-      - description: AHB reference clock
+      - description: System reference clock
 
   '#thermal-sensor-cells':
     const: 0
@@ -40,5 +40,5 @@ examples:
         compatible = "microchip,sparx5-temp";
         reg = <0x10508110 0xc>;
         #thermal-sensor-cells = <0>;
-        clocks = <&ahb_clk>;
+        clocks = <&sys_clk>;
     };

Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml

@@ -9,6 +9,32 @@ title: Moortec Semiconductor MR75203 PVT Controller bindings
 maintainers:
   - Rahul Tanwar <rtanwar@maxlinear.com>
 
+description: |
+  A Moortec PVT (Process, Voltage, Temperature) monitoring logic design can
+  include many different units.
+  Such a design will usually consists of several Moortec's embedded analog IPs,
+  and a single Moortec controller (mr75203) to configure and control the IPs.
+
+  Some of the Moortec's analog hard IPs that can be used in a design:
+  *) Temperature Sensor (TS) - used to monitor core temperature (e.g. mr74137).
+  *) Voltage Monitor (VM) - used to monitor voltage levels (e.g. mr74138).
+  *) Process Detector (PD) - used to assess silicon speed (e.g. mr74139).
+  *) Delay Chain - ring oscillator connected to the PD, used to measure IO
+     based transistors (e.g. mr76008 ring oscillator at 1.1V, mr76007 ring
+     oscillator at 1.8V).
+  *) Pre Scaler - provides divide-by-X scaling of input voltage, which can then
+     be presented for VM for measurement within its range (e.g. mr76006 -
+     divide by 2 pre-scaler).
+
+  TS, VM & PD also include a digital interface, which consists of configuration
+  inputs and measurement outputs.
+
+  Some of the units have number of series, each series can have slightly
+  different characteristics.
+
+  The mr75203 binding describes configuration for the controller unit, but also
+  for some of the analog IPs.
+
 properties:
   compatible:
     const: moortec,mr75203
@@ -44,12 +70,76 @@ properties:
   "#thermal-sensor-cells":
     const: 1
 
+  moortec,vm-active-channels:
+    description:
+      Defines the number of channels per VM that are actually used and are
+      connected to some input source.
+      Maximum number of items - number of VMs.
+      Maximum value of each item - number of channels.
+      Minimum value of each item - 0 (which means entire VM sensor is not used).
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+
+  moortec,vm-pre-scaler-x2:
+    description:
+      Defines the channels that use a mr76006 pre-scaler to divide the input
+      source by 2.
+      The pre-scaler is used for input sources that exceed the VM input range.
+      The driver uses this information to present to the user with the actual
+      value of the voltage source.
+      For channels that are not listed, no pre-scaler is assumed.
+      Maximum number of items - total number of channels in all VMs.
+      Each channel should not appear more than once.
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+
+  moortec,ts-series:
+    description:
+      Definition of the temperature equation and coefficients that shall be
+      used to convert the digital output to value in milli-Celsius.
+    minimum: 5
+    maximum: 6
+    default: 5
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  moortec,ts-coeff-g:
+    description:
+      G coefficient for temperature equation.
+      Default for series 5 = 60000
+      Default for series 6 = 57400
+    multipleOf: 1000
+    minimum: 1000
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  moortec,ts-coeff-h:
+    description:
+      H coefficient for temperature equation.
+      Default for series 5 = 200000
+      Default for series 6 = 249400
+    multipleOf: 1000
+    minimum: 1000
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  moortec,ts-coeff-cal5:
+    description:
+      cal5 coefficient for temperature equation.
+      Default for series 5 = 4094
+      Default for series 6 = 4096
+    minimum: 1
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  moortec,ts-coeff-j:
+    description:
+      J coefficient for temperature equation.
+      Default for series 5 = -100
+      Default for series 6 = 0
+    multipleOf: 1000
+    maximum: 0
+    $ref: /schemas/types.yaml#/definitions/int32
+
 required:
   - compatible
   - reg
   - reg-names
   - clocks
-  - resets
   - "#thermal-sensor-cells"
 
 additionalProperties: false
@@ -66,5 +156,9 @@ examples:
         intel,vm-map = [03 01 04 ff ff];
         clocks = <&osc0>;
         resets = <&rcu0 0x40 7>;
+        moortec,vm-active-channels = /bits/ 8 <0x10 0x05>;
+        moortec,vm-pre-scaler-x2 = /bits/ 8 <5 6 20>;
+        moortec,ts-coeff-g = <61400>;
+        moortec,ts-coeff-h = <253700>;
         #thermal-sensor-cells = <1>;
     };

Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml

@@ -10,7 +10,7 @@ maintainers:
   - Christopher Ruehl chris.ruehl@gtsys.com.hk
 
 description: |
-  The SHTC1, SHTW1 and SHTC3 are digital humidity and temperature sensor
+  The SHTC1, SHTW1 and SHTC3 are digital humidity and temperature sensors
   designed especially for battery-driven high-volume consumer electronics
   applications.
   For further information refere to Documentation/hwmon/shtc1.rst
@@ -31,13 +31,13 @@ properties:
   sensirion,blocking-io:
     $ref: /schemas/types.yaml#/definitions/flag
     description:
-      If set, the driver hold the i2c bus until measurement is finished.
+      If set, the driver holds the i2c bus until the measurement is finished.
 
   sensirion,low-precision:
     $ref: /schemas/types.yaml#/definitions/flag
     description:
-      If set, the sensor aquire data with low precision (not recommended).
-      The driver aquire data with high precision by default.
+      If set, the sensor acquires data with low precision (not recommended).
+      The driver acquires data with high precision by default.
 
 required:
   - compatible

Documentation/devicetree/bindings/vendor-prefixes.yaml

@@ -819,6 +819,8 @@ patternProperties:
     description: MNT Research GmbH
   "^modtronix,.*":
     description: Modtronix Engineering
+  "^moortec,.*":
+    description: Moortec Semiconductor Ltd.
   "^mosaixtech,.*":
     description: Mosaix Technologies, Inc.
   "^motorola,.*":

Documentation/driver-api/driver-model/devres.rst

@@ -404,7 +404,6 @@ POWER
 
 PWM
   devm_pwm_get()
-  devm_of_pwm_get()
   devm_fwnode_pwm_get()
 
 REGULATOR

Documentation/driver-api/pwm.rst

@@ -40,8 +40,7 @@ after usage with pwm_free().
 
 New users should use the pwm_get() function and pass to it the consumer
 device or a consumer name. pwm_put() is used to free the PWM device. Managed
-variants of the getter, devm_pwm_get(), devm_of_pwm_get(),
-devm_fwnode_pwm_get(), also exist.
+variants of the getter, devm_pwm_get() and devm_fwnode_pwm_get(), also exist.
 
 After being requested, a PWM has to be configured using::
 

Documentation/hwmon/aquacomputer_d5next.rst

@@ -10,6 +10,7 @@ Supported devices:
 * Aquacomputer Farbwerk 360 RGB controller
 * Aquacomputer Octo fan controller
 * Aquacomputer Quadro fan controller
+* Aquacomputer High Flow Next sensor
 
 Author: Aleksa Savic
 
@@ -20,25 +21,35 @@ This driver exposes hardware sensors of listed Aquacomputer devices, which
 communicate through proprietary USB HID protocols.
 
 For the D5 Next pump, available sensors are pump and fan speed, power, voltage
-and current, as well as coolant temperature. Also available through debugfs are
-the serial number, firmware version and power-on count. Attaching a fan to it is
-optional and allows it to be controlled using temperature curves directly from the
-pump. If it's not connected, the fan-related sensors will report zeroes.
+and current, as well as coolant temperature and eight virtual temp sensors. Also
+available through debugfs are the serial number, firmware version and power-on
+count. Attaching a fan to it is optional and allows it to be controlled using
+temperature curves directly from the pump. If it's not connected, the fan-related
+sensors will report zeroes.
 
 The pump can be configured either through software or via its physical
 interface. Configuring the pump through this driver is not implemented, as it
 seems to require sending it a complete configuration. That includes addressable
 RGB LEDs, for which there is no standard sysfs interface. Thus, that task is
 better suited for userspace tools.
 
-The Octo exposes four temperature sensors and eight PWM controllable fans, along
-with their speed (in RPM), power, voltage and current.
+The Octo exposes four physical and sixteen virtual temperature sensors, as well as
+eight PWM controllable fans, along with their speed (in RPM), power, voltage and
+current.
 
-The Quadro exposes four temperature sensors, a flow sensor and four PWM controllable
-fans, along with their speed (in RPM), power, voltage and current.
+The Quadro exposes four physical and sixteen virtual temperature sensors, a flow
+sensor and four PWM controllable fans, along with their speed (in RPM), power,
+voltage and current.
 
-The Farbwerk and Farbwerk 360 expose four temperature sensors. Depending on the device,
-not all sysfs and debugfs entries will be available.
+The Farbwerk and Farbwerk 360 expose four temperature sensors. Additionally,
+sixteen virtual temperature sensors of the Farbwerk 360 are exposed.
+
+The High Flow Next exposes +5V voltages, water quality, conductivity and flow readings.
+A temperature sensor can be connected to it, in which case it provides its reading
+and an estimation of the dissipated/absorbed power in the liquid cooling loop.
+
+Depending on the device, not all sysfs and debugfs entries will be available.
+Writing to virtual temperature sensors is not currently supported.
 
 Usage notes
 -----------
@@ -49,14 +60,14 @@ the kernel and supports hotswapping.
 Sysfs entries
 -------------
 
-================ ==============================================
-temp[1-4]_input  Temperature sensors (in millidegrees Celsius)
+================ ==============================================================
+temp[1-20]_input Physical/virtual temperature sensors (in millidegrees Celsius)
 fan[1-8]_input   Pump/fan speed (in RPM) / Flow speed (in dL/h)
 power[1-8]_input Pump/fan power (in micro Watts)
 in[0-7]_input    Pump/fan voltage (in milli Volts)
 curr[1-8]_input  Pump/fan current (in milli Amperes)
 pwm[1-8]         Fan PWM (0 - 255)
-================ ==============================================
+================ ==============================================================
 
 Debugfs entries
 ---------------

Documentation/hwmon/asus_wmi_ec_sensors.rst

@@ -15,7 +15,7 @@ Supported devices:
 
   Corsair HX850i
 
-  Corsair HX1000i
+  Corsair HX1000i (revision 1 and 2)
 
   Corsair HX1200i
 
@@ -86,8 +86,9 @@ Debugfs entries
 ---------------
 
 =======================	========================================================
-uptime			Current uptime of the psu
+ocpmode                 Single or multi rail mode of the PCIe power connectors
+product                 Product name of the psu
+uptime			Session uptime of the psu
 uptime_total		Total uptime of the psu
 vendor			Vendor name of the psu
-product			Product name of the psu
 =======================	========================================================