Merge tag 'hwmon-for-v6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck:

 - acpi_power_meter: Fix 4.29 MW output seen if acpi reports bad data

 - corsair-psu: Fix ability to probe if the driver is built into the kernel

 - ltc2991: Fix spelling mistake "contiuous" -> "continuous"

 - max31827: Add missing regulator header file include

 - nzxt-kraken2: Fix error handling path in probe function

* tag 'hwmon-for-v6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (corsair-psu) Fix probe when built-in
  hwmon: (nzxt-kraken2) Fix error handling path in kraken2_probe()
  hwmon: (acpi_power_meter) Fix 4.29 MW bug
  hwmon: max31827: include regulator header
  hwmon: ltc2991: Fix spelling mistake "contiuous" -> "continuous"

Author: torvalds

drivers/hwmon/acpi_power_meter.c

@@ -31,6 +31,7 @@
 #define POWER_METER_CAN_NOTIFY	(1 << 3)
 #define POWER_METER_IS_BATTERY	(1 << 8)
 #define UNKNOWN_HYSTERESIS	0xFFFFFFFF
+#define UNKNOWN_POWER		0xFFFFFFFF
 
 #define METER_NOTIFY_CONFIG	0x80
 #define METER_NOTIFY_TRIP	0x81
@@ -348,6 +349,9 @@ static ssize_t show_power(struct device *dev,
 	update_meter(resource);
 	mutex_unlock(&resource->lock);
 
+	if (resource->power == UNKNOWN_POWER)
+		return -ENODATA;
+
 	return sprintf(buf, "%llu\n", resource->power * 1000);
 }
 

drivers/hwmon/corsair-psu.c

@@ -899,7 +899,23 @@ static struct hid_driver corsairpsu_driver = {
 	.reset_resume	= corsairpsu_resume,
 #endif
 };
-module_hid_driver(corsairpsu_driver);
+
+static int __init corsair_init(void)
+{
+	return hid_register_driver(&corsairpsu_driver);
+}
+
+static void __exit corsair_exit(void)
+{
+	hid_unregister_driver(&corsairpsu_driver);
+}
+
+/*
+ * With module_init() the driver would load before the HID bus when
+ * built-in, so use late_initcall() instead.
+ */
+late_initcall(corsair_init);
+module_exit(corsair_exit);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Wilken Gottwalt <wilken.gottwalt@posteo.net>");

drivers/hwmon/ltc2991.c

@@ -373,7 +373,7 @@ static int ltc2991_init(struct ltc2991_state *st)
 			   LTC2991_REPEAT_ACQ_EN);
 	if (ret)
 		return dev_err_probe(st->dev, ret,
-				     "Error: Failed to set contiuous mode.\n");
+				     "Error: Failed to set continuous mode.\n");
 
 	/* Enable all channels and trigger conversions */
 	return regmap_write(st->regmap, LTC2991_CH_EN_TRIGGER,

drivers/hwmon/max31827.c

@@ -12,6 +12,7 @@
 #include <linux/i2c.h>
 #include <linux/mutex.h>
 #include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
 
 #define MAX31827_T_REG			0x0
 #define MAX31827_CONFIGURATION_REG	0x2

drivers/hwmon/nzxt-kraken2.c

@@ -161,13 +161,13 @@ static int kraken2_probe(struct hid_device *hdev,
 	ret = hid_hw_start(hdev, HID_CONNECT_HIDRAW);
 	if (ret) {
 		hid_err(hdev, "hid hw start failed with %d\n", ret);
-		goto fail_and_stop;
+		return ret;
 	}
 
 	ret = hid_hw_open(hdev);
 	if (ret) {
 		hid_err(hdev, "hid hw open failed with %d\n", ret);
-		goto fail_and_close;
+		goto fail_and_stop;
 	}
 
 	priv->hwmon_dev = hwmon_device_register_with_info(&hdev->dev, "kraken2",