pinctrl: qcom: add support for TLMM on SAR2130P

Add driver for the pincontrol device as present on the Qualcomm
SAR2130P platform. This is based on the msm-5.10 tree, tag
KERNEL.PLATFORM.1.0.r4-00400-NEO.0.

Co-developed-by: Mayank Grover <groverm@codeaurora.org>
Signed-off-by: Mayank Grover <groverm@codeaurora.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/20241018-sar2130p-tlmm-v2-2-11a1d09a6e5f@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Author: lumag

drivers/pinctrl/qcom/Kconfig.msm

@@ -227,6 +227,14 @@ config PINCTRL_SA8775P
 	  This is the pinctrl, pinmux and pinconf driver for the Qualcomm
 	  TLMM block found on the Qualcomm SA8775P platforms.
 
+config PINCTRL_SAR2130P
+	tristate "Qualcomm Technologies Inc SAR2130P pin controller driver"
+	depends on ARM64 || COMPILE_TEST
+	help
+	  This is the pinctrl, pinmux, pinconf and gpiolib driver for the
+	  Qualcomm Technologies Inc TLMM block found on the Qualcomm
+	  Technologies Inc SAR2130P platform.
+
 config PINCTRL_SC7180
 	tristate "Qualcomm Technologies Inc SC7180 pin controller driver"
 	depends on ARM64 || COMPILE_TEST

drivers/pinctrl/qcom/Makefile

@@ -35,6 +35,7 @@ obj-$(CONFIG_PINCTRL_QCOM_SSBI_PMIC) += pinctrl-ssbi-gpio.o
 obj-$(CONFIG_PINCTRL_QCOM_SSBI_PMIC) += pinctrl-ssbi-mpp.o
 obj-$(CONFIG_PINCTRL_QDU1000)	+= pinctrl-qdu1000.o
 obj-$(CONFIG_PINCTRL_SA8775P)	+= pinctrl-sa8775p.o
+obj-$(CONFIG_PINCTRL_SAR2130P)	+= pinctrl-sar2130p.o
 obj-$(CONFIG_PINCTRL_SC7180)	+= pinctrl-sc7180.o
 obj-$(CONFIG_PINCTRL_SC7280)	+= pinctrl-sc7280.o
 obj-$(CONFIG_PINCTRL_SC7280_LPASS_LPI) += pinctrl-sc7280-lpass-lpi.o