Merge tag 'cpufreq-arm-updates-6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm

Merge more ARM cpufreq updates for 6.9 from Viresh Kumar:

"- zero initialize a cpumask (Marek Szyprowski).
 - Boost support for scmi cpufreq driver (Sibi Sankar)."

* tag 'cpufreq-arm-updates-6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
  cpufreq: scmi: Enable boost support
  firmware: arm_scmi: Add support for marking certain frequencies as turbo
  cpufreq: dt: always allocate zeroed cpumask

Author: rafaeljw

drivers/cpufreq/cpufreq-dt.c

@@ -208,7 +208,7 @@ static int dt_cpufreq_early_init(struct device *dev, int cpu)
 	if (!priv)
 		return -ENOMEM;
 
-	if (!alloc_cpumask_var(&priv->cpus, GFP_KERNEL))
+	if (!zalloc_cpumask_var(&priv->cpus, GFP_KERNEL))
 		return -ENOMEM;
 
 	cpumask_set_cpu(cpu, priv->cpus);

drivers/cpufreq/scmi-cpufreq.c

@@ -30,6 +30,7 @@ struct scmi_data {
 
 static struct scmi_protocol_handle *ph;
 static const struct scmi_perf_proto_ops *perf_ops;
+static struct cpufreq_driver scmi_cpufreq_driver;
 
 static unsigned int scmi_cpufreq_get_rate(unsigned int cpu)
 {
@@ -167,6 +168,12 @@ scmi_get_rate_limit(u32 domain, bool has_fast_switch)
 	return rate_limit;
 }
 
+static struct freq_attr *scmi_cpufreq_hw_attr[] = {
+	&cpufreq_freq_attr_scaling_available_freqs,
+	NULL,
+	NULL,
+};
+
 static int scmi_cpufreq_init(struct cpufreq_policy *policy)
 {
 	int ret, nr_opp, domain;
@@ -276,6 +283,17 @@ static int scmi_cpufreq_init(struct cpufreq_policy *policy)
 	policy->transition_delay_us =
 		scmi_get_rate_limit(domain, policy->fast_switch_possible);
 
+	if (policy_has_boost_freq(policy)) {
+		ret = cpufreq_enable_boost_support();
+		if (ret) {
+			dev_warn(cpu_dev, "failed to enable boost: %d\n", ret);
+			goto out_free_opp;
+		} else {
+			scmi_cpufreq_hw_attr[1] = &cpufreq_freq_attr_scaling_boost_freqs;
+			scmi_cpufreq_driver.boost_enabled = true;
+		}
+	}
+
 	return 0;
 
 out_free_opp:
@@ -334,7 +352,7 @@ static struct cpufreq_driver scmi_cpufreq_driver = {
 		  CPUFREQ_NEED_INITIAL_FREQ_CHECK |
 		  CPUFREQ_IS_COOLING_DEV,
 	.verify	= cpufreq_generic_frequency_table_verify,
-	.attr	= cpufreq_generic_attr,
+	.attr	= scmi_cpufreq_hw_attr,
 	.target_index	= scmi_cpufreq_set_target,
 	.fast_switch	= scmi_cpufreq_fast_switch,
 	.get	= scmi_cpufreq_get_rate,

drivers/firmware/arm_scmi/perf.c

@@ -871,6 +871,9 @@ static int scmi_dvfs_device_opps_add(const struct scmi_protocol_handle *ph,
 		else
 			freq = dom->opp[idx].indicative_freq * dom->mult_factor;
 
+		/* All OPPs above the sustained frequency are treated as turbo */
+		data.turbo = freq > dom->sustained_freq_khz * 1000;
+
 		data.level = dom->opp[idx].perf;
 		data.freq = freq;