Merge tag 'linux-watchdog-6.7-rc1' of git://www.linux-watchdog.org/linux-watchdog

Pull watchdog updates from Wim Van Sebroeck:

 - add support for Amlogic C3 and S4 SoCs

 - add IT8613 ID

 - add MSM8226 and MSM8974 compatibles

 - other small fixes and improvements

* tag 'linux-watchdog-6.7-rc1' of git://www.linux-watchdog.org/linux-watchdog: (24 commits)
  dt-bindings: watchdog: Add support for Amlogic C3 and S4 SoCs
  watchdog: mlx-wdt: Parameter desctiption warning fix
  watchdog: aspeed: Add support for aspeed,reset-mask DT property
  dt-bindings: watchdog: aspeed-wdt: Add aspeed,reset-mask property
  watchdog: apple: Deactivate on suspend
  dt-bindings: watchdog: qcom-wdt: Add MSM8226 and MSM8974 compatibles
  dt-bindings: watchdog: fsl-imx7ulp-wdt: Add 'fsl,ext-reset-output'
  wdog: imx7ulp: Enable wdog int_en bit for watchdog any reset
  drivers: watchdog: marvell_gti: Program the max_hw_heartbeat_ms
  drivers: watchdog: marvell_gti: fix zero pretimeout handling
  watchdog: marvell_gti: Replace of_platform.h with explicit includes
  watchdog: imx_sc_wdt: continue if the wdog already enabled
  watchdog: st_lpc: Use device_get_match_data()
  watchdog: wdat_wdt: Add timeout value as a param in ping method
  watchdog: gpio_wdt: Make use of device properties
  sbsa_gwdt: Calculate timeout with 64-bit math
  watchdog: ixp4xx: Make sure restart always works
  watchdog: it87_wdt: add IT8613 ID
  watchdog: marvell_gti_wdt: Fix error code in probe()
  Watchdog: marvell_gti_wdt: Remove redundant dev_err_probe() for platform_get_irq()
  ...

Author: torvalds

Documentation/devicetree/bindings/watchdog/amlogic,meson-gxbb-wdt.yaml

@@ -15,9 +15,15 @@ allOf:
 
 properties:
   compatible:
-    enum:
-      - amlogic,meson-gxbb-wdt
-      - amlogic,t7-wdt
+    oneOf:
+      - enum:
+          - amlogic,meson-gxbb-wdt
+          - amlogic,t7-wdt
+      - items:
+          - enum:
+              - amlogic,c3-wdt
+              - amlogic,s4-wdt
+          - const: amlogic,t7-wdt
 
   reg:
     maxItems: 1

Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt

@@ -47,11 +47,27 @@ Optional properties for AST2500-compatible watchdogs:
 			   is configured as push-pull, then set the pulse
 			   polarity to active-high. The default is active-low.
 
-Example:
+Optional properties for AST2500- and AST2600-compatible watchdogs:
+ - aspeed,reset-mask: A bitmask indicating which peripherals will be reset if
+		      the watchdog timer expires.  On AST2500 this should be a
+		      single word defined using the AST2500_WDT_RESET_* macros;
+		      on AST2600 this should be a two-word array with the first
+		      word defined using the AST2600_WDT_RESET1_* macros and the
+		      second word defined using the AST2600_WDT_RESET2_* macros.
+
+Examples:
 
 	wdt1: watchdog@1e785000 {
 		compatible = "aspeed,ast2400-wdt";
 		reg = <0x1e785000 0x1c>;
 		aspeed,reset-type = "system";
 		aspeed,external-signal;
 	};
+
+	#include <dt-bindings/watchdog/aspeed-wdt.h>
+	wdt2: watchdog@1e785040 {
+		compatible = "aspeed,ast2600-wdt";
+		reg = <0x1e785040 0x40>;
+		aspeed,reset-mask = <AST2600_WDT_RESET1_DEFAULT
+				     (AST2600_WDT_RESET2_DEFAULT & ~AST2600_WDT_RESET2_LPC)>;
+	};

Documentation/devicetree/bindings/watchdog/fsl-imx7ulp-wdt.yaml

@@ -30,6 +30,11 @@ properties:
   clocks:
     maxItems: 1
 
+  fsl,ext-reset-output:
+    description:
+      When set, wdog can generate external reset from the wdog_any pin.
+    type: boolean
+
 required:
   - compatible
   - interrupts

Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml

@@ -21,6 +21,8 @@ properties:
               - qcom,apss-wdt-ipq5018
               - qcom,apss-wdt-ipq5332
               - qcom,apss-wdt-ipq9574
+              - qcom,apss-wdt-msm8226
+              - qcom,apss-wdt-msm8974
               - qcom,apss-wdt-msm8994
               - qcom,apss-wdt-qcm2290
               - qcom,apss-wdt-qcs404

drivers/watchdog/apple_wdt.c

@@ -173,6 +173,8 @@ static int apple_wdt_probe(struct platform_device *pdev)
 	if (!wdt->clk_rate)
 		return -EINVAL;
 
+	platform_set_drvdata(pdev, wdt);
+
 	wdt->wdd.ops = &apple_wdt_ops;
 	wdt->wdd.info = &apple_wdt_info;
 	wdt->wdd.max_timeout = U32_MAX / wdt->clk_rate;
@@ -190,6 +192,28 @@ static int apple_wdt_probe(struct platform_device *pdev)
 	return devm_watchdog_register_device(dev, &wdt->wdd);
 }
 
+static int apple_wdt_resume(struct device *dev)
+{
+	struct apple_wdt *wdt = dev_get_drvdata(dev);
+
+	if (watchdog_active(&wdt->wdd) || watchdog_hw_running(&wdt->wdd))
+		apple_wdt_start(&wdt->wdd);
+
+	return 0;
+}
+
+static int apple_wdt_suspend(struct device *dev)
+{
+	struct apple_wdt *wdt = dev_get_drvdata(dev);
+
+	if (watchdog_active(&wdt->wdd) || watchdog_hw_running(&wdt->wdd))
+		apple_wdt_stop(&wdt->wdd);
+
+	return 0;
+}
+
+static DEFINE_SIMPLE_DEV_PM_OPS(apple_wdt_pm_ops, apple_wdt_suspend, apple_wdt_resume);
+
 static const struct of_device_id apple_wdt_of_match[] = {
 	{ .compatible = "apple,wdt" },
 	{},
@@ -200,6 +224,7 @@ static struct platform_driver apple_wdt_driver = {
 	.driver = {
 		.name = "apple-watchdog",
 		.of_match_table = apple_wdt_of_match,
+		.pm = pm_sleep_ptr(&apple_wdt_pm_ops),
 	},
 	.probe = apple_wdt_probe,
 };

drivers/watchdog/aspeed_wdt.c

@@ -79,6 +79,8 @@ MODULE_DEVICE_TABLE(of, aspeed_wdt_of_table);
 #define   WDT_TIMEOUT_STATUS_BOOT_SECONDARY	BIT(1)
 #define WDT_CLEAR_TIMEOUT_STATUS	0x14
 #define   WDT_CLEAR_TIMEOUT_AND_BOOT_CODE_SELECTION	BIT(0)
+#define WDT_RESET_MASK1		0x1c
+#define WDT_RESET_MASK2		0x20
 
 /*
  * WDT_RESET_WIDTH controls the characteristics of the external pulse (if
@@ -402,6 +404,8 @@ static int aspeed_wdt_probe(struct platform_device *pdev)
 
 	if ((of_device_is_compatible(np, "aspeed,ast2500-wdt")) ||
 		(of_device_is_compatible(np, "aspeed,ast2600-wdt"))) {
+		u32 reset_mask[2];
+		size_t nrstmask = of_device_is_compatible(np, "aspeed,ast2600-wdt") ? 2 : 1;
 		u32 reg = readl(wdt->base + WDT_RESET_WIDTH);
 
 		reg &= wdt->cfg->ext_pulse_width_mask;
@@ -419,6 +423,13 @@ static int aspeed_wdt_probe(struct platform_device *pdev)
 			reg |= WDT_OPEN_DRAIN_MAGIC;
 
 		writel(reg, wdt->base + WDT_RESET_WIDTH);
+
+		ret = of_property_read_u32_array(np, "aspeed,reset-mask", reset_mask, nrstmask);
+		if (!ret) {
+			writel(reset_mask[0], wdt->base + WDT_RESET_MASK1);
+			if (nrstmask > 1)
+				writel(reset_mask[1], wdt->base + WDT_RESET_MASK2);
+		}
 	}
 
 	if (!of_property_read_u32(np, "aspeed,ext-pulse-duration", &duration)) {

drivers/watchdog/at91sam9_wdt.c

@@ -348,37 +348,28 @@ static int __init at91wdt_probe(struct platform_device *pdev)
 	if (IS_ERR(wdt->base))
 		return PTR_ERR(wdt->base);
 
-	wdt->sclk = devm_clk_get(&pdev->dev, NULL);
-	if (IS_ERR(wdt->sclk))
-		return PTR_ERR(wdt->sclk);
-
-	err = clk_prepare_enable(wdt->sclk);
-	if (err) {
+	wdt->sclk = devm_clk_get_enabled(&pdev->dev, NULL);
+	if (IS_ERR(wdt->sclk)) {
 		dev_err(&pdev->dev, "Could not enable slow clock\n");
-		return err;
+		return PTR_ERR(wdt->sclk);
 	}
 
 	if (pdev->dev.of_node) {
 		err = of_at91wdt_init(pdev->dev.of_node, wdt);
 		if (err)
-			goto err_clk;
+			return err;
 	}
 
 	err = at91_wdt_init(pdev, wdt);
 	if (err)
-		goto err_clk;
+		return err;
 
 	platform_set_drvdata(pdev, wdt);
 
 	pr_info("enabled (heartbeat=%d sec, nowayout=%d)\n",
 		wdt->wdd.timeout, wdt->nowayout);
 
 	return 0;
-
-err_clk:
-	clk_disable_unprepare(wdt->sclk);
-
-	return err;
 }
 
 static int __exit at91wdt_remove(struct platform_device *pdev)
@@ -388,7 +379,6 @@ static int __exit at91wdt_remove(struct platform_device *pdev)
 
 	pr_warn("I quit now, hardware will probably reboot!\n");
 	del_timer(&wdt->timer);
-	clk_disable_unprepare(wdt->sclk);
 
 	return 0;
 }

drivers/watchdog/ath79_wdt.c

@@ -257,19 +257,13 @@ static int ath79_wdt_probe(struct platform_device *pdev)
 	if (IS_ERR(wdt_base))
 		return PTR_ERR(wdt_base);
 
-	wdt_clk = devm_clk_get(&pdev->dev, "wdt");
+	wdt_clk = devm_clk_get_enabled(&pdev->dev, "wdt");
 	if (IS_ERR(wdt_clk))
 		return PTR_ERR(wdt_clk);
 
-	err = clk_prepare_enable(wdt_clk);
-	if (err)
-		return err;
-
 	wdt_freq = clk_get_rate(wdt_clk);
-	if (!wdt_freq) {
-		err = -EINVAL;
-		goto err_clk_disable;
-	}
+	if (!wdt_freq)
+		return -EINVAL;
 
 	max_timeout = (0xfffffffful / wdt_freq);
 	if (timeout < 1 || timeout > max_timeout) {
@@ -286,20 +280,15 @@ static int ath79_wdt_probe(struct platform_device *pdev)
 	if (err) {
 		dev_err(&pdev->dev,
 			"unable to register misc device, err=%d\n", err);
-		goto err_clk_disable;
+		return err;
 	}
 
 	return 0;
-
-err_clk_disable:
-	clk_disable_unprepare(wdt_clk);
-	return err;
 }
 
 static void ath79_wdt_remove(struct platform_device *pdev)
 {
 	misc_deregister(&ath79_wdt_miscdev);
-	clk_disable_unprepare(wdt_clk);
 }
 
 static void ath79_wdt_shutdown(struct platform_device *pdev)

drivers/watchdog/gpio_wdt.c

@@ -5,12 +5,13 @@
  * Author: 2013, Alexander Shiyan <shc_work@mail.ru>
  */
 
-#include <linux/err.h>
 #include <linux/delay.h>
-#include <linux/module.h>
+#include <linux/err.h>
 #include <linux/gpio/consumer.h>
-#include <linux/of.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/property.h>
 #include <linux/watchdog.h>
 
 static bool nowayout = WATCHDOG_NOWAYOUT;
@@ -106,7 +107,6 @@ static const struct watchdog_ops gpio_wdt_ops = {
 static int gpio_wdt_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
-	struct device_node *np = dev->of_node;
 	struct gpio_wdt_priv *priv;
 	enum gpiod_flags gflags;
 	unsigned int hw_margin;
@@ -119,7 +119,7 @@ static int gpio_wdt_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, priv);
 
-	ret = of_property_read_string(np, "hw_algo", &algo);
+	ret = device_property_read_string(dev, "hw_algo", &algo);
 	if (ret)
 		return ret;
 	if (!strcmp(algo, "toggle")) {
@@ -136,16 +136,14 @@ static int gpio_wdt_probe(struct platform_device *pdev)
 	if (IS_ERR(priv->gpiod))
 		return PTR_ERR(priv->gpiod);
 
-	ret = of_property_read_u32(np,
-				   "hw_margin_ms", &hw_margin);
+	ret = device_property_read_u32(dev, "hw_margin_ms", &hw_margin);
 	if (ret)
 		return ret;
 	/* Disallow values lower than 2 and higher than 65535 ms */
 	if (hw_margin < 2 || hw_margin > 65535)
 		return -EINVAL;
 
-	priv->always_running = of_property_read_bool(np,
-						     "always-running");
+	priv->always_running = device_property_read_bool(dev, "always-running");
 
 	watchdog_set_drvdata(&priv->wdd, priv);
 

drivers/watchdog/imx7ulp_wdt.c

@@ -23,6 +23,7 @@
 #define LPO_CLK_SHIFT		8
 #define WDOG_CS_CLK		(LPO_CLK << LPO_CLK_SHIFT)
 #define WDOG_CS_EN		BIT(7)
+#define WDOG_CS_INT_EN		BIT(6)
 #define WDOG_CS_UPDATE		BIT(5)
 #define WDOG_CS_WAIT		BIT(1)
 #define WDOG_CS_STOP		BIT(0)
@@ -62,6 +63,7 @@ struct imx7ulp_wdt_device {
 	void __iomem *base;
 	struct clk *clk;
 	bool post_rcs_wait;
+	bool ext_reset;
 	const struct imx_wdt_hw_feature *hw;
 };
 
@@ -285,6 +287,9 @@ static int imx7ulp_wdt_init(struct imx7ulp_wdt_device *wdt, unsigned int timeout
 	if (wdt->hw->prescaler_enable)
 		val |= WDOG_CS_PRES;
 
+	if (wdt->ext_reset)
+		val |= WDOG_CS_INT_EN;
+
 	do {
 		ret = _imx7ulp_wdt_init(wdt, timeout, val);
 		toval = readl(wdt->base + WDOG_TOVAL);
@@ -321,6 +326,9 @@ static int imx7ulp_wdt_probe(struct platform_device *pdev)
 		return PTR_ERR(imx7ulp_wdt->clk);
 	}
 
+	/* The WDOG may need to do external reset through dedicated pin */
+	imx7ulp_wdt->ext_reset = of_property_read_bool(dev->of_node, "fsl,ext-reset-output");
+
 	imx7ulp_wdt->post_rcs_wait = true;
 	if (of_device_is_compatible(dev->of_node,
 				    "fsl,imx8ulp-wdt")) {