f2fs: fix 32-bits hexademical number in fault injection doc

FAULT_KMALLOC                    0x000000001

There is one redundant '0' in 32-bits hexademical number of fault type,
remove it.

Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

Author: chaseyu

Documentation/ABI/testing/sysfs-fs-f2fs

@@ -710,33 +710,33 @@ Description:	Support configuring fault injection type, should be
 		enabled with fault_injection option, fault type value
 		is shown below, it supports single or combined type.
 
-		===========================      ===========
+		===========================      ==========
 		Type_Name                        Type_Value
-		===========================      ===========
-		FAULT_KMALLOC                    0x000000001
-		FAULT_KVMALLOC                   0x000000002
-		FAULT_PAGE_ALLOC                 0x000000004
-		FAULT_PAGE_GET                   0x000000008
-		FAULT_ALLOC_BIO                  0x000000010 (obsolete)
-		FAULT_ALLOC_NID                  0x000000020
-		FAULT_ORPHAN                     0x000000040
-		FAULT_BLOCK                      0x000000080
-		FAULT_DIR_DEPTH                  0x000000100
-		FAULT_EVICT_INODE                0x000000200
-		FAULT_TRUNCATE                   0x000000400
-		FAULT_READ_IO                    0x000000800
-		FAULT_CHECKPOINT                 0x000001000
-		FAULT_DISCARD                    0x000002000
-		FAULT_WRITE_IO                   0x000004000
-		FAULT_SLAB_ALLOC                 0x000008000
-		FAULT_DQUOT_INIT                 0x000010000
-		FAULT_LOCK_OP                    0x000020000
-		FAULT_BLKADDR_VALIDITY           0x000040000
-		FAULT_BLKADDR_CONSISTENCE        0x000080000
-		FAULT_NO_SEGMENT                 0x000100000
-		FAULT_INCONSISTENT_FOOTER        0x000200000
-		FAULT_TIMEOUT                    0x000400000 (1000ms)
-		===========================      ===========
+		===========================      ==========
+		FAULT_KMALLOC                    0x00000001
+		FAULT_KVMALLOC                   0x00000002
+		FAULT_PAGE_ALLOC                 0x00000004
+		FAULT_PAGE_GET                   0x00000008
+		FAULT_ALLOC_BIO                  0x00000010 (obsolete)
+		FAULT_ALLOC_NID                  0x00000020
+		FAULT_ORPHAN                     0x00000040
+		FAULT_BLOCK                      0x00000080
+		FAULT_DIR_DEPTH                  0x00000100
+		FAULT_EVICT_INODE                0x00000200
+		FAULT_TRUNCATE                   0x00000400
+		FAULT_READ_IO                    0x00000800
+		FAULT_CHECKPOINT                 0x00001000
+		FAULT_DISCARD                    0x00002000
+		FAULT_WRITE_IO                   0x00004000
+		FAULT_SLAB_ALLOC                 0x00008000
+		FAULT_DQUOT_INIT                 0x00010000
+		FAULT_LOCK_OP                    0x00020000
+		FAULT_BLKADDR_VALIDITY           0x00040000
+		FAULT_BLKADDR_CONSISTENCE        0x00080000
+		FAULT_NO_SEGMENT                 0x00100000
+		FAULT_INCONSISTENT_FOOTER        0x00200000
+		FAULT_TIMEOUT                    0x00400000 (1000ms)
+		===========================      ==========
 
 What:		/sys/fs/f2fs/<disk>/discard_io_aware_gran
 Date:		January 2023

Documentation/filesystems/f2fs.rst

@@ -182,33 +182,33 @@ fault_type=%d		 Support configuring fault injection type, should be
 			 enabled with fault_injection option, fault type value
 			 is shown below, it supports single or combined type.
 
-			 ===========================      ===========
+			 ===========================      ==========
 			 Type_Name                        Type_Value
-			 ===========================      ===========
-			 FAULT_KMALLOC                    0x000000001
-			 FAULT_KVMALLOC                   0x000000002
-			 FAULT_PAGE_ALLOC                 0x000000004
-			 FAULT_PAGE_GET                   0x000000008
-			 FAULT_ALLOC_BIO                  0x000000010 (obsolete)
-			 FAULT_ALLOC_NID                  0x000000020
-			 FAULT_ORPHAN                     0x000000040
-			 FAULT_BLOCK                      0x000000080
-			 FAULT_DIR_DEPTH                  0x000000100
-			 FAULT_EVICT_INODE                0x000000200
-			 FAULT_TRUNCATE                   0x000000400
-			 FAULT_READ_IO                    0x000000800
-			 FAULT_CHECKPOINT                 0x000001000
-			 FAULT_DISCARD                    0x000002000
-			 FAULT_WRITE_IO                   0x000004000
-			 FAULT_SLAB_ALLOC                 0x000008000
-			 FAULT_DQUOT_INIT                 0x000010000
-			 FAULT_LOCK_OP                    0x000020000
-			 FAULT_BLKADDR_VALIDITY           0x000040000
-			 FAULT_BLKADDR_CONSISTENCE        0x000080000
-			 FAULT_NO_SEGMENT                 0x000100000
-			 FAULT_INCONSISTENT_FOOTER        0x000200000
-			 FAULT_TIMEOUT                    0x000400000 (1000ms)
-			 ===========================      ===========
+			 ===========================      ==========
+			 FAULT_KMALLOC                    0x00000001
+			 FAULT_KVMALLOC                   0x00000002
+			 FAULT_PAGE_ALLOC                 0x00000004
+			 FAULT_PAGE_GET                   0x00000008
+			 FAULT_ALLOC_BIO                  0x00000010 (obsolete)
+			 FAULT_ALLOC_NID                  0x00000020
+			 FAULT_ORPHAN                     0x00000040
+			 FAULT_BLOCK                      0x00000080
+			 FAULT_DIR_DEPTH                  0x00000100
+			 FAULT_EVICT_INODE                0x00000200
+			 FAULT_TRUNCATE                   0x00000400
+			 FAULT_READ_IO                    0x00000800
+			 FAULT_CHECKPOINT                 0x00001000
+			 FAULT_DISCARD                    0x00002000
+			 FAULT_WRITE_IO                   0x00004000
+			 FAULT_SLAB_ALLOC                 0x00008000
+			 FAULT_DQUOT_INIT                 0x00010000
+			 FAULT_LOCK_OP                    0x00020000
+			 FAULT_BLKADDR_VALIDITY           0x00040000
+			 FAULT_BLKADDR_CONSISTENCE        0x00080000
+			 FAULT_NO_SEGMENT                 0x00100000
+			 FAULT_INCONSISTENT_FOOTER        0x00200000
+			 FAULT_TIMEOUT                    0x00400000 (1000ms)
+			 ===========================      ==========
 mode=%s			 Control block allocation mode which supports "adaptive"
 			 and "lfs". In "lfs" mode, there should be no random
 			 writes towards main area.