hwmon: pmbus: Reduce clear fault page invocations

Observing I2C traffic revealed consecutive transmission of CLEAR_FAULT
commands. While this doesn't cause issues, it extends driver probe time.

Avoid invoking pmbus_clear_fault_page for virtual registers, as they're
managed by the driver, not the chip.

TEST: Verified using an I2C bus analyzer that only one CLEAR_FAULT
      command is send instead 5 in a row.

Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
Link: https://lore.kernel.org/r/20230817092527.808631-1-Naresh.Solanki@9elements.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Author: PatrickRudolph

drivers/hwmon/pmbus/pmbus_core.c

@@ -561,7 +561,8 @@ static bool pmbus_check_register(struct i2c_client *client,
 		rv = pmbus_check_status_cml(client);
 	if (rv < 0 && (data->flags & PMBUS_READ_STATUS_AFTER_FAILED_CHECK))
 		data->read_status(client, -1);
-	pmbus_clear_fault_page(client, -1);
+	if (reg < PMBUS_VIRT_BASE)
+		pmbus_clear_fault_page(client, -1);
 	return rv >= 0;
 }