Merge tag 'staging-5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging and IIO driver fixes from Greg KH:
 "Some small staging and IIO driver fixes:

   - MAINTAINERS changes for the move of the staging mailing list

   - comedi driver fixes to get request_irq() to work correctly

   - counter driver fixes for reported issues with iio devices

   - tiny iio driver fixes for reported issues.

  All of these have been in linux-next with no reported problems"

* tag 'staging-5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: vt665x: fix alignment constraints
  staging: comedi: cb_pcidas64: fix request_irq() warn
  staging: comedi: cb_pcidas: fix request_irq() warn
  MAINTAINERS: move the staging subsystem to lists.linux.dev
  MAINTAINERS: move some real subsystems off of the staging mailing list
  iio: gyro: mpu3050: Fix error handling in mpu3050_trigger_handler
  iio: hid-sensor-temperature: Fix issues of timestamp channel
  iio: hid-sensor-humidity: Fix alignment issue of timestamp channel
  counter: stm32-timer-cnt: fix ceiling miss-alignment with reload register
  counter: stm32-timer-cnt: fix ceiling write max value
  counter: stm32-timer-cnt: Report count function when SLAVE_MODE_DISABLED
  iio: adc: ab8500-gpadc: Fix off by 10 to 3
  iio:adc:stm32-adc: Add HAS_IOMEM dependency
  iio: adis16400: Fix an error code in adis16400_initial_setup()
  iio: adc: adi-axi-adc: add proper Kconfig dependencies
  iio: adc: ad7949: fix wrong ADC result due to incorrect bit mask
  iio: hid-sensor-prox: Fix scale not correct issue
  iio:adc:qcom-spmi-vadc: add default scale to LR_MUX2_BAT_ID channel

Author: torvalds

MAINTAINERS

@@ -1181,7 +1181,7 @@ M:	Joel Fernandes <joel@joelfernandes.org>
 M:	Christian Brauner <christian@brauner.io>
 M:	Hridya Valsaraju <hridya@google.com>
 M:	Suren Baghdasaryan <surenb@google.com>
-L:	devel@driverdev.osuosl.org
+L:	linux-kernel@vger.kernel.org
 S:	Supported
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git
 F:	drivers/android/
@@ -8116,7 +8116,6 @@ F:	drivers/crypto/hisilicon/sec2/sec_main.c
 
 HISILICON STAGING DRIVERS FOR HIKEY 960/970
 M:	Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-L:	devel@driverdev.osuosl.org
 S:	Maintained
 F:	drivers/staging/hikey9xx/
 
@@ -17040,7 +17039,7 @@ F:	drivers/staging/vt665?/
 
 STAGING SUBSYSTEM
 M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-L:	devel@driverdev.osuosl.org
+L:	linux-staging@lists.linux.dev
 S:	Supported
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git
 F:	drivers/staging/
@@ -19135,7 +19134,7 @@ VME SUBSYSTEM
 M:	Martyn Welch <martyn@welchs.me.uk>
 M:	Manohar Vanga <manohar.vanga@gmail.com>
 M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-L:	devel@driverdev.osuosl.org
+L:	linux-kernel@vger.kernel.org
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git
 F:	Documentation/driver-api/vme.rst

drivers/counter/stm32-timer-cnt.c

@@ -31,7 +31,7 @@ struct stm32_timer_cnt {
 	struct counter_device counter;
 	struct regmap *regmap;
 	struct clk *clk;
-	u32 ceiling;
+	u32 max_arr;
 	bool enabled;
 	struct stm32_timer_regs bak;
 };
@@ -44,13 +44,14 @@ struct stm32_timer_cnt {
  * @STM32_COUNT_ENCODER_MODE_3: counts on both TI1FP1 and TI2FP2 edges
  */
 enum stm32_count_function {
-	STM32_COUNT_SLAVE_MODE_DISABLED = -1,
+	STM32_COUNT_SLAVE_MODE_DISABLED,
 	STM32_COUNT_ENCODER_MODE_1,
 	STM32_COUNT_ENCODER_MODE_2,
 	STM32_COUNT_ENCODER_MODE_3,
 };
 
 static enum counter_count_function stm32_count_functions[] = {
+	[STM32_COUNT_SLAVE_MODE_DISABLED] = COUNTER_COUNT_FUNCTION_INCREASE,
 	[STM32_COUNT_ENCODER_MODE_1] = COUNTER_COUNT_FUNCTION_QUADRATURE_X2_A,
 	[STM32_COUNT_ENCODER_MODE_2] = COUNTER_COUNT_FUNCTION_QUADRATURE_X2_B,
 	[STM32_COUNT_ENCODER_MODE_3] = COUNTER_COUNT_FUNCTION_QUADRATURE_X4,
@@ -73,8 +74,10 @@ static int stm32_count_write(struct counter_device *counter,
 			     const unsigned long val)
 {
 	struct stm32_timer_cnt *const priv = counter->priv;
+	u32 ceiling;
 
-	if (val > priv->ceiling)
+	regmap_read(priv->regmap, TIM_ARR, &ceiling);
+	if (val > ceiling)
 		return -EINVAL;
 
 	return regmap_write(priv->regmap, TIM_CNT, val);
@@ -90,6 +93,9 @@ static int stm32_count_function_get(struct counter_device *counter,
 	regmap_read(priv->regmap, TIM_SMCR, &smcr);
 
 	switch (smcr & TIM_SMCR_SMS) {
+	case 0:
+		*function = STM32_COUNT_SLAVE_MODE_DISABLED;
+		return 0;
 	case 1:
 		*function = STM32_COUNT_ENCODER_MODE_1;
 		return 0;
@@ -99,9 +105,9 @@ static int stm32_count_function_get(struct counter_device *counter,
 	case 3:
 		*function = STM32_COUNT_ENCODER_MODE_3;
 		return 0;
+	default:
+		return -EINVAL;
 	}
-
-	return -EINVAL;
 }
 
 static int stm32_count_function_set(struct counter_device *counter,
@@ -112,6 +118,9 @@ static int stm32_count_function_set(struct counter_device *counter,
 	u32 cr1, sms;
 
 	switch (function) {
+	case STM32_COUNT_SLAVE_MODE_DISABLED:
+		sms = 0;
+		break;
 	case STM32_COUNT_ENCODER_MODE_1:
 		sms = 1;
 		break;
@@ -122,19 +131,14 @@ static int stm32_count_function_set(struct counter_device *counter,
 		sms = 3;
 		break;
 	default:
-		sms = 0;
-		break;
+		return -EINVAL;
 	}
 
 	/* Store enable status */
 	regmap_read(priv->regmap, TIM_CR1, &cr1);
 
 	regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_CEN, 0);
 
-	/* TIMx_ARR register shouldn't be buffered (ARPE=0) */
-	regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_ARPE, 0);
-	regmap_write(priv->regmap, TIM_ARR, priv->ceiling);
-
 	regmap_update_bits(priv->regmap, TIM_SMCR, TIM_SMCR_SMS, sms);
 
 	/* Make sure that registers are updated */
@@ -185,11 +189,13 @@ static ssize_t stm32_count_ceiling_write(struct counter_device *counter,
 	if (ret)
 		return ret;
 
+	if (ceiling > priv->max_arr)
+		return -ERANGE;
+
 	/* TIMx_ARR register shouldn't be buffered (ARPE=0) */
 	regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_ARPE, 0);
 	regmap_write(priv->regmap, TIM_ARR, ceiling);
 
-	priv->ceiling = ceiling;
 	return len;
 }
 
@@ -274,31 +280,36 @@ static int stm32_action_get(struct counter_device *counter,
 	size_t function;
 	int err;
 
-	/* Default action mode (e.g. STM32_COUNT_SLAVE_MODE_DISABLED) */
-	*action = STM32_SYNAPSE_ACTION_NONE;
-
 	err = stm32_count_function_get(counter, count, &function);
 	if (err)
-		return 0;
+		return err;
 
 	switch (function) {
+	case STM32_COUNT_SLAVE_MODE_DISABLED:
+		/* counts on internal clock when CEN=1 */
+		*action = STM32_SYNAPSE_ACTION_NONE;
+		return 0;
 	case STM32_COUNT_ENCODER_MODE_1:
 		/* counts up/down on TI1FP1 edge depending on TI2FP2 level */
 		if (synapse->signal->id == count->synapses[0].signal->id)
 			*action = STM32_SYNAPSE_ACTION_BOTH_EDGES;
-		break;
+		else
+			*action = STM32_SYNAPSE_ACTION_NONE;
+		return 0;
 	case STM32_COUNT_ENCODER_MODE_2:
 		/* counts up/down on TI2FP2 edge depending on TI1FP1 level */
 		if (synapse->signal->id == count->synapses[1].signal->id)
 			*action = STM32_SYNAPSE_ACTION_BOTH_EDGES;
-		break;
+		else
+			*action = STM32_SYNAPSE_ACTION_NONE;
+		return 0;
 	case STM32_COUNT_ENCODER_MODE_3:
 		/* counts up/down on both TI1FP1 and TI2FP2 edges */
 		*action = STM32_SYNAPSE_ACTION_BOTH_EDGES;
-		break;
+		return 0;
+	default:
+		return -EINVAL;
 	}
-
-	return 0;
 }
 
 static const struct counter_ops stm32_timer_cnt_ops = {
@@ -359,7 +370,7 @@ static int stm32_timer_cnt_probe(struct platform_device *pdev)
 
 	priv->regmap = ddata->regmap;
 	priv->clk = ddata->clk;
-	priv->ceiling = ddata->max_arr;
+	priv->max_arr = ddata->max_arr;
 
 	priv->counter.name = dev_name(dev);
 	priv->counter.parent = dev;

drivers/iio/adc/Kconfig

@@ -266,6 +266,8 @@ config ADI_AXI_ADC
 	select IIO_BUFFER
 	select IIO_BUFFER_HW_CONSUMER
 	select IIO_BUFFER_DMAENGINE
+	depends on HAS_IOMEM
+	depends on OF
 	help
 	  Say yes here to build support for Analog Devices Generic
 	  AXI ADC IP core. The IP core is used for interfacing with
@@ -923,6 +925,7 @@ config STM32_ADC_CORE
 	depends on ARCH_STM32 || COMPILE_TEST
 	depends on OF
 	depends on REGULATOR
+	depends on HAS_IOMEM
 	select IIO_BUFFER
 	select MFD_STM32_TIMERS
 	select IIO_STM32_TIMER_TRIGGER

drivers/iio/adc/ab8500-gpadc.c

@@ -918,7 +918,7 @@ static int ab8500_gpadc_read_raw(struct iio_dev *indio_dev,
 			return processed;
 
 		/* Return millivolt or milliamps or millicentigrades */
-		*val = processed * 1000;
+		*val = processed;
 		return IIO_VAL_INT;
 	}
 

drivers/iio/adc/ad7949.c

@@ -91,7 +91,7 @@ static int ad7949_spi_read_channel(struct ad7949_adc_chip *ad7949_adc, int *val,
 	int ret;
 	int i;
 	int bits_per_word = ad7949_adc->resolution;
-	int mask = GENMASK(ad7949_adc->resolution, 0);
+	int mask = GENMASK(ad7949_adc->resolution - 1, 0);
 	struct spi_message msg;
 	struct spi_transfer tx[] = {
 		{

drivers/iio/adc/qcom-spmi-vadc.c

@@ -597,7 +597,7 @@ static const struct vadc_channels vadc_chans[] = {
 	VADC_CHAN_NO_SCALE(P_MUX16_1_3, 1)
 
 	VADC_CHAN_NO_SCALE(LR_MUX1_BAT_THERM, 0)
-	VADC_CHAN_NO_SCALE(LR_MUX2_BAT_ID, 0)
+	VADC_CHAN_VOLT(LR_MUX2_BAT_ID, 0, SCALE_DEFAULT)
 	VADC_CHAN_NO_SCALE(LR_MUX3_XO_THERM, 0)
 	VADC_CHAN_NO_SCALE(LR_MUX4_AMUX_THM1, 0)
 	VADC_CHAN_NO_SCALE(LR_MUX5_AMUX_THM2, 0)

drivers/iio/gyro/mpu3050-core.c

@@ -551,6 +551,8 @@ static irqreturn_t mpu3050_trigger_handler(int irq, void *p)
 					       MPU3050_FIFO_R,
 					       &fifo_values[offset],
 					       toread);
+			if (ret)
+				goto out_trigger_unlock;
 
 			dev_dbg(mpu3050->dev,
 				"%04x %04x %04x %04x %04x\n",

drivers/iio/humidity/hid-sensor-humidity.c

@@ -15,7 +15,10 @@
 struct hid_humidity_state {
 	struct hid_sensor_common common_attributes;
 	struct hid_sensor_hub_attribute_info humidity_attr;
-	s32 humidity_data;
+	struct {
+		s32 humidity_data;
+		u64 timestamp __aligned(8);
+	} scan;
 	int scale_pre_decml;
 	int scale_post_decml;
 	int scale_precision;
@@ -125,9 +128,8 @@ static int humidity_proc_event(struct hid_sensor_hub_device *hsdev,
 	struct hid_humidity_state *humid_st = iio_priv(indio_dev);
 
 	if (atomic_read(&humid_st->common_attributes.data_ready))
-		iio_push_to_buffers_with_timestamp(indio_dev,
-					&humid_st->humidity_data,
-					iio_get_time_ns(indio_dev));
+		iio_push_to_buffers_with_timestamp(indio_dev, &humid_st->scan,
+						   iio_get_time_ns(indio_dev));
 
 	return 0;
 }
@@ -142,7 +144,7 @@ static int humidity_capture_sample(struct hid_sensor_hub_device *hsdev,
 
 	switch (usage_id) {
 	case HID_USAGE_SENSOR_ATMOSPHERIC_HUMIDITY:
-		humid_st->humidity_data = *(s32 *)raw_data;
+		humid_st->scan.humidity_data = *(s32 *)raw_data;
 
 		return 0;
 	default:

drivers/iio/imu/adis16400.c

@@ -462,8 +462,7 @@ static int adis16400_initial_setup(struct iio_dev *indio_dev)
 		if (ret)
 			goto err_ret;
 
-		ret = sscanf(indio_dev->name, "adis%u\n", &device_id);
-		if (ret != 1) {
+		if (sscanf(indio_dev->name, "adis%u\n", &device_id) != 1) {
 			ret = -EINVAL;
 			goto err_ret;
 		}

drivers/iio/light/hid-sensor-prox.c

@@ -23,6 +23,9 @@ struct prox_state {
 	struct hid_sensor_common common_attributes;
 	struct hid_sensor_hub_attribute_info prox_attr;
 	u32 human_presence;
+	int scale_pre_decml;
+	int scale_post_decml;
+	int scale_precision;
 };
 
 /* Channel definitions */
@@ -93,8 +96,9 @@ static int prox_read_raw(struct iio_dev *indio_dev,
 		ret_type = IIO_VAL_INT;
 		break;
 	case IIO_CHAN_INFO_SCALE:
-		*val = prox_state->prox_attr.units;
-		ret_type = IIO_VAL_INT;
+		*val = prox_state->scale_pre_decml;
+		*val2 = prox_state->scale_post_decml;
+		ret_type = prox_state->scale_precision;
 		break;
 	case IIO_CHAN_INFO_OFFSET:
 		*val = hid_sensor_convert_exponent(
@@ -234,6 +238,11 @@ static int prox_parse_report(struct platform_device *pdev,
 			HID_USAGE_SENSOR_HUMAN_PRESENCE,
 			&st->common_attributes.sensitivity);
 
+	st->scale_precision = hid_sensor_format_scale(
+				hsdev->usage,
+				&st->prox_attr,
+				&st->scale_pre_decml, &st->scale_post_decml);
+
 	return ret;
 }