Merge tag 'tty-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty and serial updates from Greg KH:
 "Here is the big set of tty/serial driver changes for 6.7-rc1. Included
  in here are:

   - console/vgacon cleanups and removals from Arnd

   - tty core and n_tty cleanups from Jiri

   - lots of 8250 driver updates and cleanups

   - sc16is7xx serial driver updates

   - dt binding updates

   - first set of port lock wrapers from Thomas for the printk fixes
     coming in future releases

   - other small serial and tty core cleanups and updates

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (193 commits)
  serdev: Replace custom code with device_match_acpi_handle()
  serdev: Simplify devm_serdev_device_open() function
  serdev: Make use of device_set_node()
  tty: n_gsm: add copyright Siemens Mobility GmbH
  tty: n_gsm: fix race condition in status line change on dead connections
  serial: core: Fix runtime PM handling for pending tx
  vgacon: fix mips/sibyte build regression
  dt-bindings: serial: drop unsupported samsung bindings
  tty: serial: samsung: drop earlycon support for unsupported platforms
  tty: 8250: Add note for PX-835
  tty: 8250: Fix IS-200 PCI ID comment
  tty: 8250: Add Brainboxes Oxford Semiconductor-based quirks
  tty: 8250: Add support for Intashield IX cards
  tty: 8250: Add support for additional Brainboxes PX cards
  tty: 8250: Fix up PX-803/PX-857
  tty: 8250: Fix port count of PX-257
  tty: 8250: Add support for Intashield IS-100
  tty: 8250: Add support for Brainboxes UP cards
  tty: 8250: Add support for additional Brainboxes UC cards
  tty: 8250: Remove UC-257 and UC-431
  ...

Author: torvalds

Documentation/ABI/testing/sysfs-tty

@@ -87,19 +87,22 @@ What:		/sys/class/tty/ttyS<x>/close_delay
 Date:		October 2012
 Contact:	Alan Cox <alan@linux.intel.com>
 Description:
-		 Show the closing delay time for this port in ms.
+		Show the closing delay time for this port in centiseconds.
 
-		 These sysfs values expose the TIOCGSERIAL interface via
-		 sysfs rather than via ioctls.
+		These sysfs values expose the TIOCGSERIAL interface via
+		sysfs rather than via ioctls.
 
 What:		/sys/class/tty/ttyS<x>/closing_wait
 Date:		October 2012
 Contact:	Alan Cox <alan@linux.intel.com>
 Description:
-		 Show the close wait time for this port in ms.
+		Show the close wait time for this port in centiseconds.
 
-		 These sysfs values expose the TIOCGSERIAL interface via
-		 sysfs rather than via ioctls.
+		Waiting forever is represented as 0. If waiting on close is
+		disabled then the value is 65535.
+
+		These sysfs values expose the TIOCGSERIAL interface via
+		sysfs rather than via ioctls.
 
 What:		/sys/class/tty/ttyS<x>/custom_divisor
 Date:		October 2012

Documentation/devicetree/bindings/serial/esp,esp32-acm.yaml

@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/esp,esp32-acm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ESP32S3 ACM gadget controller
+
+maintainers:
+  - Max Filippov <jcmvbkbc@gmail.com>
+
+description:
+  Fixed function USB CDC-ACM gadget controller of the Espressif ESP32S3 SoC.
+
+allOf:
+  - $ref: serial.yaml#
+
+properties:
+  compatible:
+    const: esp,esp32s3-acm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    serial@60038000 {
+      compatible = "esp,esp32s3-acm";
+      reg = <0x60038000 0x1000>;
+      interrupts = <96 3 0>;
+    };

Documentation/devicetree/bindings/serial/esp,esp32-uart.yaml

@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/esp,esp32-uart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ESP32xx UART controllers
+
+maintainers:
+  - Max Filippov <jcmvbkbc@gmail.com>
+
+description:
+  ESP32 UART controller is a part of the ESP32 SoC.
+  ESP32S3 UART controller is a part of the ESP32S3 SoC.
+  Both SoCs are produced by Espressif Systems Co. Ltd.
+
+allOf:
+  - $ref: serial.yaml#
+
+properties:
+  compatible:
+    enum:
+      - esp,esp32-uart
+      - esp,esp32s3-uart
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    serial@60000000 {
+      compatible = "esp,esp32s3-uart";
+      reg = <0x60000000 0x80>;
+      interrupts = <27 1 0>;
+      clocks = <&serial_clk>;
+    };

Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml

@@ -70,6 +70,8 @@ properties:
   interrupts:
     maxItems: 1
 
+  wakeup-source: true
+
   fsl,dte-mode:
     $ref: /schemas/types.yaml#/definitions/flag
     description: |

Documentation/devicetree/bindings/serial/fsl-mxs-auart.yaml

@@ -14,10 +14,13 @@ allOf:
 
 properties:
   compatible:
-    enum:
-      - fsl,imx23-auart
-      - fsl,imx28-auart
-      - alphascale,asm9260-auart
+    oneOf:
+      - const: fsl,imx23-auart
+      - const: alphascale,asm9260-auart
+      - items:
+          - enum:
+              - fsl,imx28-auart
+          - const: fsl,imx23-auart
 
   reg:
     maxItems: 1
@@ -82,7 +85,7 @@ examples:
     };
 
     auart0: serial@8006a000 {
-        compatible = "fsl,imx28-auart";
+        compatible = "fsl,imx28-auart", "fsl,imx23-auart";
         reg = <0x8006a000 0x2000>;
         interrupts = <112>;
         dmas = <&dma_apbx 8>, <&dma_apbx 9>;

Documentation/devicetree/bindings/serial/maxim,max310x.txt

@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/maxim,max310x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX310X Advanced Universal Asynchronous Receiver-Transmitter (UART)
+
+maintainers:
+  - Hugo Villeneuve <hvilleneuve@dimonoff.com>
+
+properties:
+  compatible:
+    enum:
+      - maxim,max3107
+      - maxim,max3108
+      - maxim,max3109
+      - maxim,max14830
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    enum:
+      - xtal # External crystal
+      - osc  # External clock source
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+
+  gpio-line-names:
+    minItems: 1
+    maxItems: 16
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+  - $ref: /schemas/serial/serial.yaml#
+  - $ref: /schemas/serial/rs485.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        serial@2c {
+            compatible = "maxim,max3107";
+            reg = <0x2c>;
+            clocks = <&xtal4m>;
+            clock-names = "xtal";
+            interrupt-parent = <&gpio3>;
+            interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+            gpio-controller;
+            #gpio-cells = <2>;
+        };
+    };

Documentation/devicetree/bindings/serial/maxim,max310x.yaml

@@ -91,11 +91,6 @@ properties:
         - description: range upper bound
         - description: adjustment (in permyriad, i.e. 0.01%)
 
-allOf:
-  - $ref: serial.yaml
-
-unevaluatedProperties: false
-
 required:
   - compatible
   - reg
@@ -106,6 +101,11 @@ required:
   - dmas
   - dma-names
 
+allOf:
+  - $ref: serial.yaml
+
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/clock/tegra30-car.h>