Merge tag 'powerpc-6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:

 - Fix PCIe MEM size for pci2 node on Turris 1.x boards

 - Two minor build fixes

Thanks to Christophe Leroy, Douglas Anderson, Pali Rohár, Petr Mladek,
and Randy Dunlap.

* tag 'powerpc-6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc: dts: turris1x.dts: Fix PCIe MEM size for pci2 node
  powerpc: Include asm/nmi.c in mobility.c for watchdog_hardlockup_set_timeout_pct()
  powerpc: allow PPC_EARLY_DEBUG_CPM only when SERIAL_CPM=y

Author: torvalds

arch/powerpc/Kconfig.debug

@@ -240,7 +240,7 @@ config PPC_EARLY_DEBUG_40x
 
 config PPC_EARLY_DEBUG_CPM
 	bool "Early serial debugging for Freescale CPM-based serial ports"
-	depends on SERIAL_CPM
+	depends on SERIAL_CPM=y
 	help
 	  Select this to enable early debugging for Freescale chips
 	  using a CPM-based serial port.  This assumes that the bootwrapper

arch/powerpc/boot/dts/turris1x.dts

@@ -476,12 +476,12 @@
 		 * channel 1 (but only USB 2.0 subset) to USB 2.0 pins on mPCIe
 		 * slot 1 (CN5), channels 2 and 3 to connector P600.
 		 *
-		 * P2020 PCIe Root Port uses 1MB of PCIe MEM and xHCI controller
+		 * P2020 PCIe Root Port does not use PCIe MEM and xHCI controller
 		 * uses 64kB + 8kB of PCIe MEM. No PCIe IO is used or required.
-		 * So allocate 2MB of PCIe MEM for this PCIe bus.
+		 * So allocate 128kB of PCIe MEM for this PCIe bus.
 		 */
 		reg = <0 0xffe08000 0 0x1000>;
-		ranges = <0x02000000 0x0 0xc0000000 0 0xc0000000 0x0 0x00200000>, /* MEM */
+		ranges = <0x02000000 0x0 0xc0000000 0 0xc0000000 0x0 0x00020000>, /* MEM */
 			 <0x01000000 0x0 0x00000000 0 0xffc20000 0x0 0x00010000>; /* IO */
 
 		pcie@0 {

arch/powerpc/platforms/pseries/mobility.c

@@ -24,6 +24,7 @@
 #include <linux/stringify.h>
 
 #include <asm/machdep.h>
+#include <asm/nmi.h>
 #include <asm/rtas.h>
 #include "pseries.h"
 #include "vas.h"	/* vas_migration_handler() */